• 대한한의진단학회지
• /
• 제14권2호
• /
• pp.1-12
• /
• 2010

The form of intermittent pulse(代脈) has three standards. The first is "The persistence of the pulse stop(止不能還)". This standard is extensively accepted to the medical scientists in every ages of after the . The second is "The replacement of the former pulses(更代)". This standard is very useful to explain the situations that the intermittent pulse(代脈) is regarded as a dead pulse(死脈). The third is "The regular inerval of the pulse stop(止有定數)". This standard is impractical and illogical to practical using of the intermittent pulse(代脈). The reason is misreading on the of Wang-Suk-Hwa(王淑和) and the inexact & expansive reproduction of medical men of the Myeong-Chung dynasty(明淸代).

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.431-436
• /
• 2000

This paper describes on the fabrication of a SOI substrate by SDB technology and electrochemical etch-stop. The surface of the thinned SDB SOI substrate is more uniform than that of grinding or polishing by mechanical method and this process was found to be a very accurate method for SOI thickness control. During electrochemical etch-stop leakage current versus voltage curves were measured for analysis of the open current potential(OCP) point the passivation potential(PP) point and anodic passivation potential. The surface roughness and the controlled thickness selectivity of the fabricated a SDB SOI substrate were evaluated by using AFM and SEM respectively.

• 보건세계
• /
• 제63권1호
• /
• pp.26-28
• /
• 2014

지난 2012년 11월, STOP-TB운동본부는 WHO Stop TB 파트너십 사무국과 공동으로 제1차 동아시아지역 파트너십 포럼을 서울에서 개최하였다. 이틀 동안 진행된 포럼은 동아시아지역 안에서 파트너십 참가국가 간 논의가 이루어지는 첫 기회로서 국제결핵사회의 큰 환영을 받았으며, 2년 만에 자카르타가 서울로부터 바통을 이어 받아 제2차 동아시아 파트너십 포럼을 개최, 협회 신상숙 사무총장을 비롯해 관계자 6명이 회의에 참석을 위해 인도네시아로 떠났다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.3-16
• /
• 2003

ㆍAcoustic characteristics of stops in speech with contextual variability ㆍPosibility of stop recognition by post processing technique ㆍFurther work - Speech database - Modification of decoder - automatic segmentation of acoustic parameters

• 대한족부족관절학회지
• /
• 제19권4호
• /
• pp.176-180
• /
• 2015

Purpose: The aim of the current study is to report on the clinical and radiographic results after calcaneo-stop procedure in Korean children with symptomatic flexible flatfoot. Materials and Methods: Twenty-two children suffering pain along the medial aspect of midfoot with flexible flatfoot whose symptoms did not improve with conservative measures and therefore underwent calcaneo-stop procedure were identified retrospectively. Clinically, American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale and visual analogue scale (VAS) were evaluated. Radiographically, standing anteroposterior and lateral radiographs of the foot and Saltzman's alignment views were taken and talonavicular coverage angle, lateral talo-first metatarsal angle, and hindfoot alignment angles were measured and analyzed. Results: Clinically, AOFAS ankle-hindfoot scale improved from $70.3{\pm}5.6$ to $97.3{\pm}2.5$ and VAS improved from $6.4{\pm}1.6$ to $0.2{\pm}0.4$. Radiographically, talonavicular coverage angle improved from $28.3^{\circ}{\pm}12.3^{\circ}$ to $10.9^{\circ}{\pm}8.1^{\circ}$, lateral talo-first metatarsal angle improved from $-19.3^{\circ}{\pm}9.0^{\circ}$ to $-2.4^{\circ}{\pm}8.1^{\circ}$, and hindfoot alignment angle improved from valgus $11.9^{\circ}{\pm}10.0^{\circ}$ to $3.5^{\circ}{\pm}4.3^{\circ}$ at minimum 2-year follow-up. No complications occurred postoperatively. Conclusion: Calcaneo-stop procedure is a simple and very effective procedure for management of pediatric symptomatic flexible flatfoot that does not respond to conservative treatment.

• 소음진동
• /
• 제9권4호
• /
• pp.643-651
• /
• 1999

A brief description of the current technology (contact-start-stop) employed in most of today's hard disk drive is presented. The dynamics and head/disk interactions during a start/stop process are very complicated and no one has been able to accurately model the interactions. Thus, the head/disk interface that meets the start/stop durability and stiction requirements are always developed statistically. In arriving at a solution. many sets of statistical tests are run by varying several parameters. such as, the carbon overcoat thickness. lubricant thickness. disk surface roughness, etc. Consequently, the cost associated III developing an interface could be significant since the outcome is difficult to predict. An alternative method known as Load/Unload technology alters the problem set. such that. the start/stop performance can be designed in a predictable manner. Although this techno¬logy offers superior performance and significantly reduces statistical testing time, it also has some potential problems. However. contrary to the CSS technology. most of the problems can be solved by design and not by trial and error. One critical problem is that of head/disk contacts during the loading and unloading processes. These contact can cause disk and slider damage because the contacts are likely to occur at high disk speeds resulting in large friction forces. Use of glass substrate disks also may present problems if not managed correctly. Due to the low thermal conductivity of glass substrates. any head/disk contacts may result in erasure due to frictional heating of the head/disk interface. In spite of these and other potential problems. the advantage with L/UL system is that these events can be understood. analyzed. and solved in a deterministic manner.

• 대한전자공학회논문지
• /
• 제8권4호
• /
• pp.25-30
• /
• 1971

직류자계로 가변동조되는 YIG여파기의 설계및 측정을 논하였다. 직각으로 굽힌 박판전송선과 2개의 YIG구를 RF 원형회전자계로 분리되는 곳에 위치시켜 차단및 투과특성을 얻었다. 차단특성은 -25db 였으며 통과특성은 이보다 약간 낮은 22db였다. FMR에 관한 이론치와 실측치는 잘 일치하였으며 방향성결합기로 사용될 수 있음을 보였다.

• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.26-31
• /
• 2001

This paper presents the electrochemical etch-stop characteristics of single-crystal Si(001) wafers in tetramethyl ammonium hydroxide(TMAH):isopropyl alcohol(IPA):pyrazine solutions. The addition of pyrazine to TMAH:IPA solutions increased the etch rate of (100) Si, thus the etching time required by the etch-stop process shortened. The current-voltage(I-V) characteristics of n- and p-type Si in TMAH:IPA:pyrazine solutions were obtained, respectively. Open circuit potential(OCP) and passivation potential(PP) of n- and p-type Si, respectively, were obtained and applied potential was selected between n- and p-type Si PPs. The electrochemical etch-stop method was used to fabricate 801 microdiaphragms of 20 ${\mu}{\textrm}{m}$ thickness on a 5-inch Si wafer. The average thickness of fabricated 801 microdiaphragms on one Si wafer was 20.03 ${\mu}{\textrm}{m}$ and the standard deviation was $\pm$0.26 ${\mu}{\textrm}{m}$. The Si surface of the etch-stopped microdiaphragm was extremely flat with no noticeable taper or nonuniformity.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.35-43
• /
• 2016

A compact ultra-wide band antenna with a quadruple band-notched characteristic is proposed. The proposed antenna consists of a slotted trapezoid patch radiator, an inverted U-shaped band stop filter, a pair of C-shaped band stop filters, and a rectangular ground plane. To realize the quadruple notch-band characteristic, a U-shaped slot, a complementary split ring resonator, an inverted U-shaped band stop filter, and two C-shaped band stop filters are utilized in this antenna. The antenna satisfies the -10 dB reflection coefficient bandwidth requirement in the frequency band of 2.88-12.67 GHz, with a band-rejection characteristic in the WiMAX (3.43-3.85 GHz), WLAN (5.26-6.01 GHz), X-band satellite communication (7.05-7.68 GHz), and ITU 8 GHz (8.08-8.87 GHz) signal bands. In addition, the proposed antenna has a compact volume of $30mm{\times}33.5mm{\times}0.8mm$ while maintaining omnidirectional patterns in the H-plane. The experimental and simulated results of the proposed antenna are shown to be in good agreement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1092-1099
• /
• 2011

This paper is concerned with the ATO speed profile generation method in the moving block system. The ATO speed profile is calculated using the acceleration limit and the jerk limit to improve ride comfort. In addition, the speed limit and stop distance provided from ATP profile should be considered to ensure safety. In the moving block system, the speed limit and the stop position are frequently changed in real-time. Therefore, the ATO speed profile should be regenerated immediately according to change of the speed limit and the stop position, within the acceleration limit and the jerk limit. In this paper, the ATO speed profile generation method is proposed, which considers not only frequent changes of the speed limit and the stop position but also acceleration limit and jerk limit. Futhermore the simulation result is presented to verify usefulness of this method.