• Research in Plant Disease
• /
• v.28 no.4
• /
• pp.221-230
• /
• 2022

The fire blight caused by Erwinia amylovora (Ea) was first reported in 2015 in Korea, and the disease has rapidly spread to 22 regions until 2021. In Korea, all host plants in the apple and pear orchards where fire blight occurred should be eliminated and buried by the Plant Protection Act. To prevent the spread of the disease, all burial sites were prohibited from planting the new host plants for the next three years. To confirm the eradication efficiency of Ea and the reoccurrence of fire blight, the surveillance facilities were established on three burial sites from 2019 to 2020 in Anseong-si, Gyeonggi-do, and Chungju-si, Chungcheongbuk-do. As host plants, five apple trees of fire blight-susceptible cultivar 'Fuji', were planted in each facility. All facilities were enclosed with fences and nets and equipped with two CCTVs, motion sensors, and several other sensors for recording weather conditions to monitor the environment of the sentinel plants in real-time. The sentinel plants were checked for the reoccurrence of fire blight routinely. Suspicious plant parts were collected and analyzed for Ea detection by loop-mediated isothermal amplification polymerase chain reaction and conventional polymerase chain reaction. Until November 2022, Ea has not been detected in all sentinel plants. These results might support that the burial control of infected plants in soil works efficiently to remove Ea and support the possibility to shorten the prohibition period of host plant establishment in the burial sites.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2023

The nucleation mechanism was studied using a calcium ion selective electrode (Ca ISE) to observe the formation of CaCO₃, a representative mineral in the CO2 cycle, and to analyze the effect of the Mg/Ca-ratio and temperature on the formation of pre-nucleation cluster (PNC) and CaCO₃. As a result of the experiment, a small amount of crystal was formed. Energy dispersive X-ray spectroscopy (EDS) was used for surface element analysis, and a field emission scanning-electron microscope (FE-SEM) was used for the morphology analysis of synthesized carbonates. These results showed that various shapes of crystalline CaCO₃ (calcite, aragonite, etc.) were observed for each Mg/Ca ratio and temperature. In addition, the calibration plot obtained from Ca ISE showed information on the formation process of CaCO₃. Our results showed that as magnesium ions interfered with the binding of calcium and carbonate ions and delayed the aggregation between PNCs, the nucleation and formation of CaCO₃ were delayed. On the other hand, the temperature showed an opposite trend as compared to the effect of magnesium under our experimental conditions, indicating that temperature accelerated the formation of CaCO₃. Furthermore, the morphology of CaCO₃ clearly changed according to the Mg/Ca ratio and temperature, and it was confirmed that the two factors are very important for CaCO₃ formation in that they could affect the overall process.

• Journal of Environmental Impact Assessment
• /
• v.32 no.2
• /
• pp.94-111
• /
• 2023

In order to establish an effective management strategy for invasive species early detection and regular monitoring are required to assess their introduction or dispersal. Environmental DNA (eDNA) is actively applied to evaluate the fauna including the presence of invasive species as it has high detection sensitivity and can detect multiple species simultaneously. In Korea, the applicability evaluation of metabarcoding is being conducted mainly on fish, and research on other taxa is insufficient. Therefore, this study identified the feasibility of detecting invasive species in Korea using eDNA metabarcoding. In addition, to confirm the possibility of detection by taxa, the detection of target species was evaluated using four universal primers (MiFish, MiMammal, Mibird, Amp16S) designed for fish, mammals, birds, and amphibians. As a result, target species (Trachemys scripta, 3 sites; Cervus nippon, 3 sites; Micropterus salmoides, 7 sites; Rana catesbeiana, 4 sites) were detected in 17 of the total 55 sites. Even in the selection of dense sampling sites within the study area, there was a difference in the detection result by reflecting the ecological characteristics of the target species. A comparison of community structures (species richness, abundance and diversity) based on the presence of invasive species focused on M.salmoides and T.scripta, showed higher diversity at the point where invasive species were detected. Also, 1 to 4 more species were detected and abundance was also up to 1.7 times higher. The results of invasive species detection through metabarcoding and the comparison of community structures indicate that the accumulation of large amounts of monitoring data through eDNA can be efficiently utilized for multidimensional ecosystem evaluation. In addition, it suggested that eDNA can be used as major data for evaluation and prediction, such as tracking biological changes caused by artificial and natural factors and environmental impact assessment.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.46-54
• /
• 2023

In this study, we examined the residual amounts of formaldehyde in hygiene products to determine the safety of these products in Gyeonggi-do. Formaldehyde is among the harmful substances that may remain within certain hygiene products. On the basis of an analysis of formaldehyde in a total of 222 items (6 disposable paper straws, 9 disposable paper napkins, 21 toilet papers, 13 disposable dishcloths, 16 disposable paper towels, 32 wet wipes for food service restaurants, 25 disposable cotton swabs, and 100 disposable diapers), we detected traces in three wet wipes for food service restaurants (1.87 to 4.45 mg/kg), which is approximately 9% to 22% of the standard level (20 mg/kg). We established that all the hygiene products assessed in the study met the individual standards for formaldehyde, thereby confirming that safe products are being distributed. In the standards and specifications for hygiene products, the formaldehyde test method is regulated for application with respect to three categories based on the type of product. The samples used in this study were of types for which method 1 or method 2 is applied, and the limits of detection, limits of quantification, linearity, and recovery rates were reviewed to verify the validity of each test method. When method 2 was applied, we experienced interference when performing analysis at a wavelength of 412 nm, which was associated with the influence of impurities in some samples of disposable cotton swabs and disposable diapers. Consequently, in these cases, the results were compared after analysis using method 1. By comparing the results obtained using method 2 with those obtained using method 1, the latter of which were unaffected by the interference of impurities, we were able to detect formaldehyde at low concentrations. These findings accordingly highlight the necessity to standardize the formaldehyde test method for future analyses.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• Annals of Clinical Microbiology
• /
• v.22 no.1
• /
• pp.9-13
• /
• 2019

Background: The isolation of carbapenemase-producing Enterobacteriaceae (CPE) has become increasingly common. Continuous surveillance for these organisms is essential because their infections are closely related to outbreaks of illness and are associated with high mortality rates. The aim of this study was to develop and evaluate multiplex PCR as a means of detecting several important CPE genes simultaneously. Methods: We aimed to develop a multiplex PCR that could detect seven CPE genes simultaneously. The multiplex PCR was composed of seven primer sets for the detection of KPC, IMP, VIM, NDM-1, GES, OXA-23, and OXA-48. We designed different PCR product sizes of at least 100 bp. We evaluated the performance of this new test using 69 CPE-positive clinical isolates. Also, we confirmed the specificity to rule out false-positive reactions by using 71 carbapenem-susceptible clinical strains. Results: A total of 69 CPE clinical isolates showed positive results and were correctly identified as KPC (N=14), IMP (N=13), OXA-23 (N=12), OXA-48 (N=11), VIM (N=9), GES (N=5), and NDM (N=5) by the multiplex PCR. All 71 carbapenem-susceptible clinical isolates, including Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, and Pseudomonas aeruginosa, showed negative results. Conclusion: This multiplex PCR can detect seven CPE genes at a time and will be useful in clinical laboratories.

• Korea Science and Art Forum
• /
• v.31
• /
• pp.21-32
• /
• 2017

Local festivals form the regional cultures and atmosphere of communication; they increase the demand of domestic tourism businesses and thus, have an important role in ripple effects (e.g. regional image improvement, tourist influx, job creation, regional contents development, and local product sales) and economic revitalization. IoT (Internet of Thing) technologies have been developed especially, beacon-one of the IoT services has been applied as plenty of types and forms both domestically and internationally. However, notwithstanding expansion of current digital mobile technologies, it still remains as difficult for the individual to track the information about all the local festivals and to fulfill the tourists' needs of enjoying festivals given the weak strategic approaches and advertisement activities. Furthermore, current festival-related mobile applications don't function well as delivering information and have numerous contents issues (e.g. ways of information delivery within the festival places, independent application usage for each festival, one time usage due to one time event). This research, based on the background mentioned above, aims to develop the local festival mobile application and data analysis system applying beacon technology. First of all, three algorithms were developed, namely, 'festival crowding algorithm', 'visitor stats algorithm', and 'customized information algorithm', and then beta test was followed with the developed application and data analysis system. As a result, they could form the database of visitors' types and behaviors, and provide functions and services, such as personalized information, waiting time for festival contents, and 'hot place' function. Besides, in Google Play store, they also got the titles given with more than 13,000 downloads within first three months and as the most exposed application related with festivals; and, thus, got credited with their marketability and excellence. This research follows this order: chapter 2 shows the literature review of local festival related with technology development, beacon service, and festival application. In Chapter 3, design plans and conditions are described of developing local festival mobile application and data analysis system with beacon. Chapter 4 evaluates the results of the beta performance test to verify applicability of the developed application and data analysis system, and lastly, chapter 5 explains the conclusion and suggests the future research.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.73-82
• /
• 2016

Best drought tolerance index was determined through statistics analysis and growth appearance of drought tolerant plants was determined by cultivation in pot and sloping land. For determination of best drought tolerant indicators, RD(Resistant dry days), LD(Leaf area), UTR(Unit transpiration), RWC(Relative water content), RWL(Relative water loss), LA(Leaf area), SN(Stoma unmber) and SA(Stoma area) were carried out by correlation and PCA analysis. RWL and UTR were affected on plant drought tolerance according to comparison among six indices for resistant dry days. The PCs axes separated SA, LA, RD and RWC and SN. UTR was negatively correlated with SA, RWL were also negatively correlated with RWC and SN. RWL and UTR were proved best selection indicator for the selection of drought tolerant species. Ulmus parvifolia, Bidens bipinnata, Patrinia villosa, Kummerowia striata, Arundinella hirta, Artemisia gmelini etc. were selected drought tolerant plants. Shoot growth appearance of drought resistant plants was differed pot and sloping land. Shoot growth and leaf number was no significant differences between the pot and sloping land. However, root growth of drought tolerant plants was all the difference between two cultivation. T/R ratio of drought tolerant plants was also found a big difference. T/R ratio of drought tolerant plants in sloping land was lower than that of pot. These results will be served efficiently plant breeding.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.96-116
• /
• 2022

The Daebodan was an altar, which held a memorial service for emperors of the Ming dynasty. This alter, which was referred to as Hwangdan, was first constructed in 1704. When the Japanese Invasion of Korea commenced in 1592, Shinjong, the emperor of the Ming dynasty, sent reinforcements to Josun to help. This alter was made to repay Shinjong's kindness. Before this, Song-siyeol(宋時烈), Leader of Noron(老論), made a shrine at Hwayangdong to hold memorial services for Shinjong, and after some time, this developed into a national ceremony. Construction of the Daebodan largely changed the backyard of Changdukgung-palace. However considering the construction process, the meaning of the Daebodan was not a big deal. At first, the optimal place for the Daebodan was selected at the site of a inner icehouse. But the inner icehouse could not be transferred to other site due to the circumstances. After all, the Daebodan was constructed at the site of Byeoldaeyeong(別隊營) which was located in the outside of palace. Most of the stones for the new Daebodan were used ones. And the annexe of Byeoldaeyeong was used for Daebodan without any changes being made. The scale of the construction was not particularly grand. After the construction, Sukjong, who made the Daebodan, showed barely any interest in it. But the conception of the Daebodan was back again in the history by Youngjo. He was also not interested in the Daebodan during his early years of ruling time. However, in the 1740's, he started to become interested in the ceremony of Daebodan, and carried out a large-scale reconstruction of the Daebodan. Jegigo(祭器庫) was rebuilt In 1739. And Jaesil(齋室), staying one night before the ceremonial day, was added in 1745. In 1749, the Daebodan was greatly changed by enshrining Uijong and Taejo, emperors of the Ming dynasty. The shape of alter was changed. Moreover this alter was made by newly quarried stones. And several buildings, Junsachung(典祀廳), Jaesaengchung(宰牲廳) and Akgongchung(樂工廳), were added to the site. In 1762, meritorious retainers were enshrined to the Daebodan. After all the Daebodan became an important part of the backyard of Changdukgung-palace. During the reign of Jungjo, the Daebodan also was an important part of backyard of Changdukgung-palace. But significant changes were not made at that time. The only change was the moving of Kyungbonggak(敬奉閣) in 1799. Afterward the Daebodan remained unchanged. The ceremonies at the Daebodan stopped in 1908. And the Daebodan disappeared into the mist of history.