• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.221-228
• /
• 1994

Respitation and growth rates of leaves, branches, stems and roots of 2 to 11-yr-old red pine trees(Pinus densiflora) were examined and applied to Thornley's growth equation, $$R=(\frac{1-Yg}{Yg})\frac{dW}{dt}+mW$$. The conversion efficiency of substrates(Yg), maintenance respiration coefficients(m), relative growth rates(${\mu}$) were estimated. The efficiency of conversion of substrates (Yg) was 0.3637g/g dw/yr and the maintenance respiration coefficient(m0 was 0.094g/g dw/yr. The relative growth rate(${\mu}$) was remarkably reduced with age from 0.90(2-year-old) to 0.33:11 year-old). The Ratio of gross respiration(R) per gross photosynthesis(Pg), R/Pg showed the range of 0.6~0.7 and annually 64% of Pg was spent for constructive respiration. The 3.4% of dry weight of whole tree was spent for maintenance respiration.

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.823-839
• /
• 2012

Environmental Specimen Banks (ESBs) are playing pivotal role in monitoring the effect of environmental pollution on the ecosystem based on the retrospective analysis of the representative samples collected regularly and stored in cryogenic condition. In Korea, National Environmental Specimen Bank (NESB) was established in 2009 and the standard operating procedures (SOPs) for sampling, and cryogenic milling and storage had been prepared during 2007-2010. Since then, the tentative SOPs for the seven kinds of specimens (shoots of Red Pine (Pinus densiflora) and Korean Pine (Pinus koraiensis), leaves of Mongolian Oak (Quercus mongolica) and Zelkova Tree (Zelkova serrata), eggs of Feral Pigeon (Columba livia var. domestica), muscles and organs of Common Carp (Cyprinus carpio), and Freshwater Bivalve (Unio (Nodularia) douglasiae)) have been put to test in the field and laboratory as well against the practicality and feasibility. The SOPs were improved by reflecting the findings from the research and the following discussion regarding the selection of specimen (Feral Pigeon suffering from a control management), sample size (a problem of decreasing number of sampling trees related to increasing sampling time) and period (a problem related to a bud growth), and sampling methods etc.. In addition, barcoding system for the management of the specimen information, and monitoring system of the cryogenic storage to regulate the optimum temperature and the liquid nitrogen level were also developed for the efficient and effective control of the samples. Lastly, the safety guide and emergency protocol were augmented to guarantee a safe work environment with the cryogenic facility. These improvements of the SOPs are expected to contribute to more stable operation of the NESB.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.753-763
• /
• 2015

To identify the overall status of vegetation in the nine ridges of the Jeongmaeks located in South Korea, the types of forest vegetation were analyzed with focus on the names of the plant communities that appeared in each Jeongmaek. The vegetation investigation data for the entire mountain ranges were used for quantitative analysis (TWINSPAN, DCA), thereby classifying the plant communities and understanding the structures and characteristics of the vegetation. Upon review of the ratios of the number of plant communities by each ridge of the Jeongmaeks, a relatively larger number of communities were found to be dominated by deciduous oak trees in the Honam and Nakdong Jeongmaek. In addition, the ratios of communities where deciduous oak trees and deciduous broad-leaved trees appeared were higher in the Hannam-geumbuk, Nakdong, Honam, Geumnam-honam, Geumnam and Geumbuk Jeongmaeks. On the other hand, Naknam, Hannam, and Hanbuk Jeongmaeks were shown to have the type of forest vegetation in which the ratio of artificial forests was high. According to the results of the quantitative analysis, eight communities were grouped as follows: Celtis sinensis-Mallotus japonicus, Deciduous oak, Pinus thunbergii-P. rigida, Quercus mongolica-P. densiflora, Q. mongolica-Q. variabilis, Q. mongolica-P. densiflora, Q. mongolica-broad-leaved deciduous and Q. mongolica-P. koraiensis communities. The typical forest vegetations in the Jeongmaeks were the Q. mongolica-dominant community, the P. densiflora-dominant community, and the deciduous oak-dominant community.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.362-366
• /
• 2010

Carbon isotope ratio ($^{13}C/^{12}C$, expressed as ${\delta}^{13}C$) of tree ring can be proxy of atmospheric $CO_2$ concentration ([$CO_2$]) due to the inter-correlation between atmospheric [$CO_2$], ${\delta}^{13}C$ of atmospheric $CO_2$, and ${\delta}^{13}C$ of plant tissue that assimilates atmospheric $CO_2$. This study was conducted to investigate if ${\delta}^{13}C$ of tree ring of Pinus densiflora in polluted area may show a lower value than that in unpolluted area and to explore the possibility of reconstructing atmospheric [$CO_2$] using its relationship with ${\delta}^{13}C$ of tree ring. During the period between 1999 and 2005, ${\delta}^{13}C$ of tree annual ring tended to decrease over time, and the ${\delta}^{13}C$ in polluted area (-27.2‰ in 2009 to -28.3‰ in 2005) was significantly (P<0.001) lower than that (-26.0‰ in 1999 to -27.1‰ in 2005) in unpolluted area. This reflects a greater emission of $CO_2$ depleted in $^{13}C$ in the polluted area. Atmospheric [$CO_2$] was significantly (P<0.01) correlated with ${\delta}^{13}C$ of tree ring in a linear fashion. Using the linear regression equation, atmospheric [$CO_2$] in the polluted area was estimated to range from 392.3 ppm in 1999 to 410.9 ppm in 2005, and these values were consistently higher than the national atmospheric [$CO_2$] monitored at the Anmyoundo meteorological station (from 370.7 ppm in 1999 to 387.2 ppm in 2005). Our study suggested that it is possible to reconstruct atmospheric [$CO_2$] in a certain area using the relationship between tree ring ${\delta}^{13}C$ and atmospheric [$CO_2$].

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.2
• /
• pp.29-38
• /
• 2007

This study was undertaken to investigate the variation of equilibrium moisture content (EMC) in transverse direction and three different directional (longitudinal, radial, and tangential) linear movements, and diffusion coefficients within a tree disc of Korean red pine (pinus densiflora). The EMC gradually increased in heartwood from pith. Therefore, the chemical components might differ even in heartwood and the radial variation in EMC might have a close relationship with the cellulose content within a cross section. The specific gravity increases gradually from pith and the porosity has not direct influence on the variation of EMC within a tree disk. Both the radial and tangential diffusion coefficients exhibited clear trend of increase from pith. The EMC change (${\Delta}EMC$) and tangential diffusion coefficient were close to be axisymmetrical but others were deviated from axisymmetry. The diffusion coefficient decreases with decreasing an activation energy and specific gravity, The diffusion coefficient increased with increasing ${\Delta}EMC$ and hygroscopicity of wood might be inversely proportional to the activation energy, The fJEMC may depend on the chemical constituents of cellulose, hemicellulose and lignin. As the number of sorption sites and sorption capacity of wood increase, therefore, it might be assumed that the hygroscopicity of wood increases while activation energy decreases. Modeling physico-mechanical behavior of wood, the variations should be considered to improve the accuracy.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.14-20
• /
• 2001

On the bending process, metal-strap plays an important role in dispersing the stress generated in wood. Therefore, the metal-strap has more influence on the property of bentwood materials. The effect of the metal-strap thickness for bentwood was examined. The effect of metal-strap on the bending properties of Korean red pine(Pinus densiflora Sieb. et Zucc.)was investigated in this research. The metal-strap thickness is divided into 4 kinds such as 1.0, 0.8, 0.6, 0.4 mm. The specimens were selected by grain such as annual ring angles, flat grain and half-edge grain specimens. As a result of this study, the bending ability of 1.0, 0.8 mm, thickness of half-edge grain specimens was better than flat grain specimens but the result of 0.6, 0.4 mm were reversed. The bending ability of half-edge grain was better than flat grain and the grade was higher. When the processed specimens were dried, the radius of curvature(ROC) was decreased became drying-stress was not perfectly dispersed. An optimum drying-condition would deminish this phenomenon.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.3-9
• /
• 2000

This study concerns the distribution and dependence of moisture content(MC) in wood for same thickness in different vapor transmission conditions. The specimens were disks of 70-mm in diameter and 20-mm in thickness from quartersawn lumber of Korean red pine(Pinus densiflora S. et Z.). The experiments were conducted in ten different conditions on the difference of the vapor pressures by the JIS Z-0208. The distribution of moisture content in wood can be illustrated by two straight lines intersecting at the point of about ten percent Me. On the other hand, when more or less than about 10 percent, the distribution of the Me can be illustrated by one straight lines. Therefore, it is considered that the values of 10 percent Me has no relation to the wood and experimental conditions. It's assumed that 10 percent is the boundary point at which the moisture sorption energy changes. In a previous study, diffusion coefficient is almost constant with no relation to a thickness of the woods for the constant experimental conditions. But, in this study, it seems that diffusion coefficient from the moisture gradient vary with the Me of wood in different vapor transmission conditions.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.149-156
• /
• 2017

This study investigates fire-retardant performances and combustion/thermal characteristics of fire-retardant treated wood by comparing them with those of fire-retardant untreated wood from the expreimental resutls of cone calorimeter and thermo-gravimetric(TG) analyzer. Hazardousness of combustion product gases for fire-retardant treated wood and untreasted wood were also observed from the results of internal finish material incombustibility test according to the Korea standard code of KS F 2271. In this study, we also tried to improve the fire retardant performance of wood by applying fire-retardant chemical composites, and to secure the fire safety performance in buildings. Red pine (Pinus densiflora) was selected as a test specimen because it is mostly used as a building material in Korea. Fire retardant chemical composites (FRCs) were prepared by mixing boron, phosphorous, and nitrogen species and treated by press-impregnation method. Water-based FRCs were composed of 3% boric acid($H_3BO_3$), 3% borax decahydrate($Na_2B_4O_7$), 8% ammonium carbonate($(NH_4)_2CO_3$), diammonium phosphate ($(NH_4)_2HPO_4$) varied from 10-30% and potassium carbonate($K_2CO_3$) varied from 10-30%. From the test results of cone calorimeter, TG analysis and gas hazard assessments, newly proposed were the optimal composition and production methods of FRCs which can sufficiently meet fire-retardant level 3 based on Korea law of construction. Thus, the FRCs, developed in this study, are anticipated to contribute to the improvement of fire safety and widespread of usage in wood as building materials.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.44-49
• /
• 2003

This study was carried out to evaluate the weathering durability of waterborne preservative (AAC, ACQ, CCA, CuAz) treated Japanese red pine (Pinus densiflora S. et Z.) sapwood samples by accelerated weathering, and to find out the factor of stability. When considered the color changes, weight losses, surface degradation, and microstructure changes due to weathering, ACQ-, CCA-, and CuAz-treated samples were durable against weathering; the weathering durability of AAC-treated samples was poor and similar to untreated controls. The lignin content in aqueous extracts collected from ACQ-, CCA-, and CuAz-treated samples during weathering was lower than that from untreated and AAC-treated ones. From these findings, we might concluded that weathering durability of ACQ-, CCA-, and CuAz-treated samples was enhanced by the fixation of preservative component(s) onto the lignin structure, which is very susceptible to weathering.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.108-114
• /
• 2002

Red pine(Pinus densiflora) square timbers with 14.0 cm and 16.5 cm of face size and 24 m long were dried in a vacuum-press kiln and in a radio-frequency/vacuum(RF/V) kiln to compare drying rate, moisture content(MC) distribution and specific energy. RF/V drying rate was higher than vacuum-press drying rate. The effect of size of cross section on the RF/V drying rates were more pronounced than those of vacuum-press drying. The longitudinal- and the transverse MC distribution of dried square timber showed convex profile for the vacuum-press drying and concave profile for the RF/V drying. Moisture gradient of width direction was similar to the thickness direction in vacuum-press dried square timber and was more slight than that of the thickness direction in the RF/V dried large square timber. The specific energy consumption curve increased as MC decreased. Specific energy(kWh/kg of water evaporated) of the vacuum-press process required more than that of the RF/V process.