• 대한토목학회논문집
• /
• 제37권5호
• /
• pp.879-890
• /
• 2017

기존 미국의 포장 설계법(AASHTO)과 대표적인 도로포장 유지보수 의사결정시스템인 HDM-4는 국내 실정 또는 환경에 적합하지 않아 현실적인 도로설계, 시공 및 유지관리 차원에서 국내에 적합하지 않다. 포장 수명 연장에 따른 환경비용에서도 차이가 발생할 것으로 판단되는 바, 본 연구의 주요 목표는 대한민국의 환경조건과 차종별 특성을 반영한 한국형 도로포장 설계법(KPRP) 설계 소프트웨어의 도로 공용성 해석 모델을 기반으로 활용하여 운영 및 유지보수단계에서 대표적인 세 가지 유지보수전략별 LCCC 계산을 통해 최적 대안을 선정하는 것이다. 본 연구 결과 40년 동안의 누적 탄소배출량은 대안 2의 절삭 및 덧씌우기가 누적 탄소배출량과 LCCC의 현재가치비용이 제일 적은 것으로 분석되었다. 본 연구를 통해 다양한 도로관리 유지보수 공사별 $CO_2$배출 원단위 구축이 가능하며 향후 탄소요금의 증가에 따른 도로시설별 다양한 유지관리 전략 마련에 대한 기초연구를 수행하였다는 점에 의의가 있다.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.69-75
• /
• 2015

PURPOSES : The hydrated lime-modified asphalt, which improves moisture resistance, is normally used for pavements to reduce the number of potholes. However, the method of applying the material properties of the lime-modified asphalt mixture for use in pavements is not covered in the Korean Pavement Research Program (KPRP). The objective of this research is to find a method for the design application of lime-modified asphalt's material properties to the KPRP. METHODS: The section for test design is selected in some conditions which are related to the level of design regarding Annual Average Daily Traffic (AADT). To define the application methods of hydrated lime in the KPRP, the models of fatigue, rut and international roughness index (IRI) are determined based on the M-EPDG test results from some earlier research results. Moreover, it is well known that dynamic moduli of the unmodified mixture are not different from those of the lime-modified mixture. RESULTS: The performance results of hydrated lime-modified asphalt pavement were not very much different from those of the unmodified pavement, which meant the limited design regulations regarding fatigue failure, rutting deformation and IRI. CONCLUSIONS: The KPRP uses the weather model from the data for previous 10 years. It implies that the KPRP cannot predict abnormal climate changes accurately. Hence, the predictive weather data regarding the abnormal climate changes are unreliable. Secondly, the KPRP cannot apply the moisture resistance of asphalt mixtures. Therefore, a second level of design study will have to be performed to reflect the influence of moisture. It means that the influence on pavement performance can be changed by the application of hydrated lime in asphalt mixture design.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.15-24
• /
• 2012

역학적-경험적 포장설계 프로그램 중에서, 미국 AASHTO 설계법을 기초로 개발된 MEPDG는 교통량, 기상, 재료물성, 포장구조 등을 입력변수로 하여 기술자가 최적의 대안을 찾도록 한다. 하지만 MEPDG에서 기술적 문제가 발견되고 있기 때문에 이를 해결하여 프로그램을 개선하기 위한 노력이 계속되고 있다. 한편, 국내에서도 KPRP 연구과제에서 역학적-경험적 포장설계 프로그램이 개발되어 왔다. 이 한국형 포장설계 프로그램을 더욱 합리적으로 개발하고 개선하기 위해서는 이미 사용되고 있는 MEPDG를 분석하여 서로 비교할 필요가 있다. 콘크리트 포장설계의 경우, 피로균열은 다른 공용성 인자와는 달리 매우 복잡한 로직을 통해 예측된다. 따라서 본 논문에서는 MEPDG 버전 0.5, 버전 1.0, 그리고 버전 1.1의 피로균열 전이함수를 분석하였다. 그리고 버전별 MEPDG와 KPRP 입력변수들의 누적피로손상에 대한 민감도를 서로 비교하였다.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.11-19
• /
• 2014

PURPOSES : The purpose of this article is to investigate the predicted life of jointed concrete pavement (JCP) with two variables effecting on axle load spectra (ALS). The first variable is different data acquisition methods whether using high-speed weigh-in-motion (HS-WIM) or not and the other one is spectra distribution due to overweight enforcement on main-lane of expressway using HS-WIM. METHODS : Three sets of ALS had been collected i) ALS provided by Korea Pavement Research Program (KPRP), which had been obtained without using HS-WIM ii) ALS collected by HS-WIM before the enforcement at Kimcheon and Seonsan site iii) ALS collected after the enforcement at the same sites. And all ALS had been classified into twelve vehicle classes and four axle types to compare each other. Among the vehicle classes, class 6, 7, 10 and 12 were selected as the major target for comparing each ALS because these were considered as the primary trucks with a high rate of overweight loading. In order to analyze the performance of JCP based on pavement life, fatigue crack and International Roughness Index (IRI) were predicted using road pavement design program developed by KPRP and each ALS with same annual average daily traffic (AADT) was applied to design slab thickness. RESULTS : Comparison ALS of KPRP with those of HS-WIM shows that the ALS of KPRP has a low percentage of heavy spectra such as 6~9 tonnes for single axle, 18~21 tonnes for tandem axle and 27~30 tonnes for tridem axle than other two ALS of HS-WIM in most vehicle classes and axle types. It means that ALS of KPRP was underestimated. And after the enforcement, percentage of heavy spectra close to 10 tonnes per an axle are lowered than before the enforcement by the effect of overweight enforcement because the spectra are related to overweight regulation. Prediction results of pavement life for each ALS present that the ALS of HS-WIM collected before the enforcement makes the pavement life short more than others. On the other hand, the ALS of KPRP causes the longest life under same thickness of slab. Thus, it is possible that actual performance life of JCP under the traffic like ALS of HS-WIM could be short than predicted life if the pavement was designed based on ALS provided by KPRP. CONCLUSIONS : It is necessary to choose more reliable and practical ALS when designing JCP because ALS can be fairly affected by acquisition methods. In addition, it is important to extend performance life of the pavement in service by controlling traffic load such as overweight enforcement.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.83-90
• /
• 2016

PURPOSES : Nowadays, cavity phenomena occur increasingly in pavement layers of downtown areas. This leads to an increment in the number of potholes, sinkholes, and other failure on the road. A loss of earth and sand from the pavement plays a key role in the occurrence of cavities, and, hence, a structural-performance evaluation of the pavement is essential. METHODS: The structural performance was evaluated via finite-element analysis using KPRP and KICTPAVE. KPRP was developed in order to formulate a Korean pavement design guide, which is based on a mechanical-empirical pavement design guide (M-EPDG). RESULTS: Installation of the anti-freezing layer yielded a fatigue crack, permanent deformation, and international roughness index (IRI) of 13%, 0.7 cm, and 3.0 m/km, respectively, as determined from the performance analysis conducted via KPRP. These values satisfy the design standards (fatigue crack: 20%, permanent deformation: 1.3 cm, IRI: 3.5 m/km). The results of FEM, using KICTPAVE, are shown in Figures 8~12 and Tables 3~5. CONCLUSIONS: The results of the performance analysis (conducted via KPRP) satisfy the design standards, even if the thickness of the anti-freezing layer is not considered. The corresponding values (i.e., 13%, 0.7 cm, and 3.0 m/km) are obtained for all conditions under which this layer is applied. Furthermore, the stress and strain on the interlayer between the sub-grade and the anti-freezing layer decrease gradually with increasing thickness of the anti-freezing layer. In contrast, the strain on the interlayer between the sub-base and the anti-freezing layer increases gradually with this increase in thickness.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.19-28
• /
• 2012

PURPOSES : Recently, the mechanistic-empirical overlay pavement design program that is linked with Korea Pavement Research Program (KPRP) has been developed. This paper focused on establishing the framework and developing the program for the asphalt overlay design over the existing asphalt concrete pavement. METHODS : The overlay pavement design program developed in this study was investigated to assess the sensitivity to various pavement conditions, such as the damage level and thickness of existing layers. In addition, the actual overlay design on currently performing pavement was carried out as a practical example. RESULTS : From the sensitivity analysis, it was found that the thickness and damage level of existing asphalt layer mostly affect the overlay design results. In addition, under the same condition, the overlay pavement would better perform in cold region. From the overlay design with the actual condition, it is noted that the overlay thickness varies depending on the given condition. CONCLUSIONS : Based on various evaluations, it was concluded that the overlay design program developed in this study is a reliable and reasonable tool to be used in the actual pavement design.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.487-493
• /
• 2017

본 연구의 목적은 한국형포장설계법 프로그램을 이용하여 아스팔트포장에 발생하는 주요 파손 유형인 평탄성(IRI, International Roughness Index), 피로균열, 소성변형 등에 영향을 주는 요소를 평가하는 것이다. 평가에 사용된 설계입력변수로는 지역구분(서울과 부산), 교통량조건, 아스팔트 바인더, 표층용 골재의 최대치수, 아스팔트 표층 두께, 아스팔트 기층의 두께 등을 적용하였다. 해석조건은 위의 변수를 조합하여 총 64개의 case study를 수행하여, 이들 결과를 상호 비교 평가하여 아스팔트 포장의 파손에 영향을 주는 변수의 중요도를 평가하였다. 기본조건에서 1개의 변수에 의한 영향 고려시, 서울지역 5000대/일 교통량의 경우 아스팔트 바인더(C)의 영향이 다른 요소에 비해 상대적으로 크게 나타났고, 나머지 요소 중에서는 기층두께(A), 표층두께(B), 골재입도두께(D) 순으로 결과를 나타내었다. 10,000대/일 교통량의 경우도 마찬가지로 똑같은 결과 값이 나타났다. 부산지역 5000대/일 교통량의 경우 서울지역과 마찬가지로 아스팔트 바인더(C)의 영향이 다른 요소에 비해 상대적으로 크게 나타났고, 나머지 요소중에는 서울지역과 다르게 기층두께(A), 골재입도두께(D), 표층두께(B) 순으로 결과를 나타내었다. 교통량 조건과 지역에 따라 다소 차이는 있었지만, 아스팔트 포장 파손에 가장 큰 영향을 주는 요소는 아스팔트 바인더이고, 2가지 조합의 경우 아스팔트 바인더와 기층의 두께 등으로 평가되었다.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.53-59
• /
• 2014

PURPOSES : This study estimated an asphalt pavement internal behavior under uphill lanes considering reducing speed of heavy truck on uphill slope. METHODS : Truck performance curve which has been adapted to "Korea Highway Capacity Manual" was analyzed. And asphalt pavement internal behaviors were estimated with Multi-layered elastic analysis using KPRP(Korea Pavement Research Program) dynamic modulus prediction equations. RESULTS : As a result, it is shown that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% climbing slope, it's speed reduced to 25.4 km/h, at same time frequency in asphalt layer decrease to 67.2% and it's dynamic modulus degrades to 30.9%. Based on these results, internal behavior as decreasing vehicle speed on uphill lanes were estimated. CONCLUSIONS : From the results of Multi-layered elastic analysis, internal behavior showed that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% slope on uphill lanes, vertical strain was increased to 44.4% at the bottom of surface course, and lateral tensile strain was increased to 20.5% at the bottom of base course.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.83-94
• /
• 2013

PURPOSES : In Korea, most designs of pavement had been mainly performed by considering CBR of granular materials before KPRP(Korea Pavement Research Program) and 86 AASHTO design method were introduced. Since then, the trend of the pavement designs gradually have moved to using mechanical characteristics throughout the resilient modulus based on the test results up to recently. In this study, we should like to research the mechanical characteristics of paving materials containing Recycled aggregates through the cyclic loading triaxial compression tests. METHODS : The kinds of materials were tested; coarse grained subbase materials, refining aggregates base materials and recycled aggregates. RESULTS : The present study aims to figure out the resilient modulus of paving materials containing Recycled aggregates through the cyclic loading triaxial compression tests. CONCLUSIONS : The test results revealed that the engineering properties of the recycled aggregates were more excellent than the those of others.

• 대한토목학회논문집
• /
• 제38권1호
• /
• pp.113-119
• /
• 2018

현재 국내에서는 도심지 및 주거지에 원활한 물순환 구조를 이루기 위해 저영향개발에 근거한 투수성 포장 시스템 구축에 대한 시도를 하고 있다. 본 연구는 투수성 아스팔트 포장 구조 설계를 위한 포장인자 구축 및 설계법을 제안하고자 한다. 선행 연구 분석 결과, 1993년 AASHTO 설계법이 적합한 것으로 확인 되었다. 본 연구에서는 투수성 아스팔트 포장 재료의 상대구조계수 같은 주요 설계인자를 선행연구 분석을 통해 정량적으로 산정하였으며, 1993년 AASHTO 설계법 및 국내국도설계기준을 적용한 투수성 포장 구조 설계 프로그램을 개발하였다. 본 연구에서 개발된 프로그램 및 한국형 도로 설계법 프로그램을 비교한 결과 다양한 교통량 및 노반 지지력 조건에서 합리적인 포장 설계 두께를 산정하는 것을 확인하였다.