• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.63-74
• /
• 2006

It's essential to meet the expectations of drivers through reasonable road design, which makes the drivers to recognize the conditions of road sufficiently. In this case, we could say that because the roads are consistently designed, drivers can make a safe and comfortable drive. There are so many studies about the alignment design consistency methods which are previously mentioned. In this study, Firstly we categorize the studies which are concerned with the estimation of the alignment design consistency methods and then apply the method which fits for the actual condition into the practice. And we'll make a realistic method by using the data which aye collected from the National Road. The developed model in this study is the predicting model including speed($V_t$) as the variable on the upper stream 100m of the curve. This model was developed which divided to two cases in the all directions of two lanes; One case is the $R{\leq}200m$ and another case is the R>200m. In the section of the $R{\leq}200m$, this case was influenced on the road alignment(R) and($V_t$) and another section was found that is affected to the speed($V_t$) on the upper stream loom rather than the effect of road alignment(R). In the case of all directions of four lanes, however, this study is predicted divided to two sections on the 400m of R, these section have more influenced to($V_t$) than the road alignment factors. This result of the four lanes was represented to different result with the two lanes. This study will further need development of the predicting model with the higher confidence through collecting data with more the exact data, the various road alignment data and speed of the several sections on the upper stream on the curve.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.98-106
• /
• 2011

Establishing conservation programs to protect and maintain populations of endangered species are not only a global trend, but also a pursuit endorsed by the Korean Environmental Conservation Act. This study evaluates the feasibility of alternative habitat patches for the endangered butterfly Parnassius bremeri. A portion of habitat of P. bremeri is expected to be fragmented and damaged due to the scheduled construction of the Sangju-Yongduk Highway. A trans fer of the habitat patches of P. bremeri is also scheduled. In order to select an alternative habitat patch, the Mark-Release-Recapture (MRR) method was used to simulate a patch transfer model. The connectedness between habitat are as and the survival of local populations were evaluated for each candidate habitat. It was found that metapopulations with patch distances of <250m showed a 50% connectedness and survival rate in local populations. P. bremeri were expected to migrate at an average distance of 300m. In addition, P. bremeri formed a metapopulation that exhibited intimate patch dynamics that promoted persistence among these patches. Possible candidate habitats including those recommended by local governing bodies were evaluated along with habitats that may counter problems arising from the damage done to the original habitat and habitats that may have a compensatory value equal to that of the original habitat. Based on these criteria, Ansa-myeon township office was selected due to its high scores. This scoring was based on a consideration of a wide range of variables that mark a successful transfer of habitat. These include the amount of funding available, the governing bodies of the possible alternative habitat, and the Expected collaborative effort of local citizens. This decision was collaborated on by incorporating the expertise of various fields of study including biology, ecology, biogeography, ecological engineering, landscape architecture, and social sciences. Therefore, it is suggested that in order to evaluate an alternative habitat for organisms, many social issues as well as ecological issues must be considered.

• Analytical Science and Technology
• /
• v.32 no.1
• /
• pp.17-23
• /
• 2019

Sources of NOx are both anthropogenic (e.g. fossil fuel combustion, vehicles, and other industrial processes) and natural (e.g. lightning, biogenic soil processes, and wildfires). The nitrogen stable isotope ratio of NOx has been proposed as an indicator for NOx source partitioning, which would help identify the contributions of various NOx sources. In this study, the ${\delta}^{15}N-NO_2$ values of vehicle emissions were measured in an urban region, to understand the sources and processes that influence the isotopic composition of NOx emissions. The Ogawa passive air sampler was used to determine the isotopic composition of $NO_2$(g). In urban tunnels, the observed $NO_2$ concentration and ${\delta}^{15}N-NO_2$ values averaged $3809{\pm}2656ppbv$ and $7.7{\pm}1.8$‰, respectively. The observed ${\delta}^{15}N-NO_2$ values are associated with slight regional variations in the vehicular $NO_2$ source. Both $NO_2$ concentration and ${\delta}^{15}N-NO_2$ values were significantly higher near the expressway ($965{\pm}125ppbv$ and $5.9{\pm}1.4$‰) than at 1.1 km from the expressway ($372{\pm}96ppbv$ and $-11.5{\pm}2.9$‰), indicating a high proportion of vehicle emissions. Ambient ${\delta}^{15}N-NO_2$ values were used in a binary mixing model to estimate the percentage of the ${\delta}^{15}N-NO_2$ value contributed by vehicular NOx emissions. The calculated percentage of the ${\delta}^{15}N-NO_2$ contribution by vehicles was significantly higher close to the highway, as observed for the $NO_2$ concentration and ${\delta}^{15}N-NO_2$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.193-202
• /
• 2018

This paper proposed a crack spacing calculation formulation which is an important parameter for calculating the crack width, that is the main factor for verification of serviceability limit states and durability performance evaluation of reinforced concrete members. The basic equation of average crack spacing is derived by considering the bond characteristics which is the governing equation for the analysis of cracking behavior in reinforced concrete members. In order to consider the effect of the cover thickness and concrete compressive strength, the crack spacing measured in 124 direct tensile tests performed by several researchers was analyzed and each coefficient was proposed. And, correlation analysis was performed from 80 specimen data where the maximum and average crack spacing were simultaneously measured, and a correlation coefficient that can easily predict the maximum crack spacing from the average crack spacing was proposed. The results of the proposed average crack spacing equation and maximum crack spacing correlation were compared with those current design code specification. The comparisons of proposed equations and the Korean design codes show that the proposed formulation for the average crack spacing and the maximum crack spacing improves the accuracy and reliability of prediction compared to the corresponding provisions of the Korean Concrete Structural Design Code and Korean Highway Bridge Design Code (Limit States Design).

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.111-121
• /
• 2001

Rockfall protection fences are used for diminishing rockfall damage in roads side slopes. In order to install the fences in effective way, the conditions of rock slopes and total predicted impact energy of fa11ing rock should be considered. However, the fences have been constructed without any consideration for lithology, height and slope angle of rock slope in Korea. In addition, the information about the performance of the protection fences, which should be evaluated by in-situ test or laboratory test in order to check out the practical use in the field, is not available. Therefore, in design manual for the rockfall protection fence, the specific details for the installation of this type of fence are not provided yet. The full sized rockfall in situ test was carried out for the calculation of falling energy of rock and the evaluation of the maximum energy absorbing capacity of fence. For this test, the rock slopes whose heights are about 20 m and dip angle of 65 degree, have been chosen. This is because those geometries are mean height and slope angle of most road cut slopes along Korean national highway. Based on the preliminary simulation procedure, four different sizes of concrete ball (0.7, 1.3, 2.3 and 4.3 ton) were prepared and flour different types of protection fence were constructed. The results of this test provide information about the maximum energy absorbing capacity of the fence, kinetic energy of rockfall and restitution coefficient, and these results can be utilized in the establishment of rockfall fence design and construction manual.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.137-143
• /
• 2016

OBJECTIVES : Bituminous materials, such as tack coat, are utilized between pavement layers for improving the bond strength in pavement construction sites. The standards regarding the application of bituminous material are not clearly presented in the Korean construction guideline without RS(C)-4. Hence, the objective of this study is to determine the optimum content of bituminous materials by analyzing interlayer shear strength (ISS) from the direct shear tester, which was developed in this research. The shear strength of tack coat was defined with the sort of bituminous materials. METHODS : The mixtures for the shear test were made using marshall mix design. The specimens were vertically and horizontally separated for the direct shear test. The separated specimens were bonded using bituminous material. The objectives of the experiment are to determine the performance of bond and shear properties resulting from slippage, rutting, shovel, and corrugation of asphalt pavements. A machine based on the Louisiana interlayer shear strength tester (LISST) of NCHRP Report-712 was developed to determine the ISS. The applied types of tack coat were RS(C)-4, AP-3, QRS-4, and BD-coat with contents of $0.3{\ell}/m^2$, $0.45{\ell}/m^2$, $0.6{\ell}/m^2$, and $0.8{\ell}/m^2$, respectively. RESULTS : Table 2 gives the results of the direct shear test using the developed shear machine. The BD-coat type indicated the highest average ISS value compared to the others. Between the surface and binder course, optimum tack coat application rates for AP-3, RS(C)-4, QRS-4, and BD-Coat were $0.6{\ell}/m^2$, $0.3{\ell}/m^2$, $0.6{\ell}/m^2$, and $0.45{\ell}/m^2$, respectively. These optimum contents were determined using the ISS value. CONCLUSIONS : The ISS values of AP-3, RS(C)-4, and QRS-4 showed similar tendencies when ISS increased in the range $0.3{\sim}0.6{\ell}/m^2$, while ISS decreased when the applied rate exceeded $0.6{\ell}/m^2$. Similarly, the highest ISS value of the BD-coat was observed when the applied rate was $0.45{\ell}/m^2$. However, shear strength was similar to the maximum value of ISS when the tack-coat application rate of BD-Coat exceeded $0.45{\ell}/m^2$.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.33-43
• /
• 2006

This research is to the selection of optimal probability distribution as well as the estimation for design hourly factor in consideration of traffic characteristic, such as road function, lane number and AADT. To accomplish the objectives, we are applied to various probability distribution using traffic data that observed at permanent traffic count points in 2005. The parameters or the selected 14 probability distribution were estimated based on the method of maximum likelihood and the validity condition of the estimated parameter The goodness-of-fit test, such as chi-square test. was performed as well as the estimation of design hourly factor. As a result, An appropriate distributions of each case were selected : Pearson V for two lane of rural roads, LogLogistic for the four lane of rural roads, LogLogistic for the urban roads, Extreme value for recreation roads. And optimal K factor are as following : $0.1{\sim}0.2 $ for two lane of rural roads, $0.09{\sim}0.14$ for the four lane of rural roads. $0.07{\sim}0.13$ for the urban roads, $0.1{\sim}0.2$ for recreation roads.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.95-106
• /
• 2012

Driver's capability of identifying the change in freeway alignments and environments is one of important factors associated with traffic safety on freeways. In particular, driver's visibility and recognition capability are highly dependent on the altitude of the sun by sunset, sunrise, and nighttime. The purpose of this study is to identify the characteristics of geometric conditions affecting crash occurrences at sunset, sunrise, and nighttime. Poisson and negative binomial regressions were adopted to predict freeway crash frequency in this study. Freeway crash data during 2007~2010 were used for developing the crash frequency models. A set of variables representing the characteristics of geometric conditions were identified as significant ones affecting crash occurrences. The results of this study would be useful in deriving effective countermeasures for preventing traffic crashes that mainly occur at sunset, sunrise, and nighttime on freeways.

• Journal of Korean Society of Transportation
• /
• v.36 no.3
• /
• pp.216-228
• /
• 2018

In this study analyzed the ponding changing of plastic deformation section follwed time development to apply weather, geometry and traffic data in additon to time development to improve road management service and safety of roads during or after rain. After We selected an 8.3km section of old national highway the Seongnam-Janghowon section and created a three-demensional surface of terrain through the numerical transformantion of design drawing data, with reflection the linear data of the same coordinate system in order to describe more realistic roads, we design additional structures with shading above roads. The altitude and azimuth of the sun were calculated and set based on the longitude and latitude data of the survey line for the analysis of the sun rate, and the daylight impact zone was visualized by setting the shaded time to an interval of 1 hour and the shade rate of the corresponding section. In addition, the evaporation volume calculated from weather data such as temperature, humidity, radiant energy, and road temperature analyzes together, it will use the way of a safer and more efficient road management as grasping the ponding changing more efficent in time development.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.361-374
• /
• 2018

The country has built and is operating IT-based integrated management system for efficient management of national highway tunnels used publicly these days. Since this system doesn't include the management function on earthquakes, it is impossible to promptly respond to earthquakes and to select the sections requiring seismic reinforcement. Tunnels designed and constructed after 1999 have been subjected to seismic design for an earthquake with a return period 1000 years. Therefore, it is necessary to evaluate the stability of structures in case of earthquakes more than this. Since it takes a lot of time to perform the stability evaluation on various earthquake magnitudes, a method that can easily evaluate earthquakes is needed. In this paper, the empirical simplification method that can easily evaluate the earthquake was proposed. For this, the study calculated ground displacement by conducting one-dimensional ground response analysis, and examined the safety of tunnels in the event of occurrence of an earthquake using two means of response displacement method (analytics and numerical analysis).