• 한국영어학회지:영어학
• /
• 제1권2호
• /
• pp.243-272
• /
• 2001

This paper focuses on the applicability of paradigm to derivational morphology and the pressure of paradigm enforced on derivational phonology and morphology. Through a close examination of well-attested data, we will demonstrate that apparent surface idiosyncrasies in phonology are the results of paradigm leveling, and that paradigmatic forces of analogy are productively operating in English word formation. On the basis of these observations, it can be argued that the notion of paradigm has at least some justification within derivational morphology as well, even if not to the same extent that it has with inflectional morphology and that the paradigm forces are independently needed in any adequate phonological and morphological theory. This can also be extended to provide evidence against the split morphology hypothesis that inflectional and derivational morphology belong to different grammatical modules.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.602-604
• /
• 2004

NPB surface morphologies deposited on different temperature substrates were investigated using atomic force microscopy(AFM). It has been found that the NPB morphology turned from island morphology at high temperature(100$^{\circ}C$) to grain morphology at room temperature. To characterize the effect of NPB surface morphology, the devices with the structure of Glass/ITO/NPB/$Alq_3$/Al were fabricated using NPB films deposited at different substrate temperature and their performances were compared.

• 대한치과교정학회지
• /
• 제45권2호
• /
• pp.66-73
• /
• 2015

Objective: To compare condylar position and morphology among different vertical skeletal patterns. Methods: Diagnostic cone-beam computed tomography images of 60 adult patients (120 temporomandibular joints) who visited the orthodontic clinic of Hallym University Sacred Heart Hospital were reviewed. The subjects were divided into three equal groups according to the mandibular plane angle: hypodivergent, normodivergent, and hyperdivergent groups. Morphology of the condyle and mandibular fossa and condylar position were compared among the groups. Results: The hypodivergent and hyperdivergent groups showed significant differences in superior joint spaces, antero-posterior condyle width, medio-lateral condyle width, condyle head angle, and condylar shapes. Conclusions: Condylar position and morphology vary according to vertical facial morphology. This relationship should be considered for predicting and establishing a proper treatment plan for temporomandibular diseases during orthodontic treatment.

• Annals of Clinical Neurophysiology
• /
• 제19권2호
• /
• pp.93-100
• /
• 2017

In this article, we review the differences of the brain morphology according to age, sex, and handedness. Age is a well-known factor affecting brain morphology. With aging, progressive reduction of brain volume is driven. Sex also has great effects on brain morphology. Although there are some reports that the differences of brain morphology may originate from the differences of weight between the 2 sexes, studies have demonstrated that there are regional differences even after the correction for weight. Handedness has long been regarded as a behavioral marker of functional asymmetry. Although there have been debates about the effect of handedness on brain morphology, previous well-established studies suggest there are differences in some regions according to handedness. Even with the studies done so far, normal brain morphology is not fully understood. Therefore, studies specific for the each ethnic group and standardized methods are needed to establish a more reliable database of healthy subjects' brain morphology.

• 한국컴퓨터정보학회논문지
• /
• 제19권8호
• /
• pp.107-117
• /
• 2014

본 논문에서는 심전도 파형에서 P, R, T-wave와 같은 local maxima 신호 영역과 Q, S-wave와 같은 local minima 신호영역을 제거하여 기저선 변동 잡음을 제거하기 위한 방법을 제시한다. 이를 위해 형태연산을 개선한 morphology-pair 연산을 심전도 파형에 적용하고, 그 결과 발생되는 돌출 파형을 제거하고자 중간 값 연산을 적용하였다. 제안한 알고리즘의 성능을 확인하기 위해 실제 심전도 임상 데이터인 MIT/BIH 데이터베이스를 이용하였으며, 실험 결과 원 신호를 왜곡 하지 않고, 기저선 변동 잡음을 효과적으로 제거함을 확인하였다.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.245-260
• /
• 2015

The effect of salt milling process on the crystal size, morphology, and color characteristics of C.I. Pigment Red 57:1 was studied. The primitive morphology and color properties of the pigment after synthesis were studied in the former series work. The size and morphology of primary particles and the second aggregation features should be considered because they are very important to determine pigment quality. We compared the primary morphology of pigment particles before drying with the secondary aggregated morphology of pigment particles after drying and salt milling process. Morphological properties were investigated by particle size analysis, X-ray diffraction, and scanning electron microscopy and color measurement was carried out. Significant reduction in particle size as well as enhanced crystallite size after salt milling process was observed. This result might give a difference in color of the pigment, turning into brighter and more blue-toned red color. It was revealed that synthesis condition affect the morphology and color of the pigment even after milling. Increase in HCl concentration in the synthesis process enhanced crystal size and quality forming bluer-red pigments but an increase in $CaCl_2$ concentration resulted in more amorphous crystals forming darker-red pigments after salt milling.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.133-136
• /
• 2007

The crystal morphology of hydroxyapatite [HAp] phase in gelatin [GEL] matrices was investigated with the condition of a GEL precursor treatment in an aqueous solution of $H_{3}PO_{4}$ at $37-80^{\circ}C$. Needle-shaped nanocomposite particles were prepared through a dynamic reaction during a coprecipitation process using a phosphoric GEL solution. Various types of mineralized morphology appeared with a phosphorylated condition of the GEL solution. HAp/GEL nanocomposite slurries showed the existence of an octacalcium phosphate [OCP] phase during the process.

• 천문학논총
• /
• 제30권2호
• /
• pp.529-530
• /
• 2015

We investigated the galaxy morphology of 6 Abell clusters at z = 0.0784 - 0.145 based on deep images obtained using MegaCam on the CFHT. For hundreds of galaxies in our data, we classified their morphology based on criteria related to secular or merger related evolution. We found that the morphological mixture of galaxies varies considerably from cluster to cluster. This article contains a general description of our deep imaging campaign and preliminary results for galaxy morphologies in cluster environments.

• 천문학회보
• /
• 제37권2호
• /
• pp.233-233
• /
• 2012

I review the dependence of galaxy properties on environmental parameters such as the local density, nearest neighbor distance and morphology. We find that a galaxy with an early- or late-type nearest companion within its virial radius tends to be an early or late type, respectively. The morphology of galaxies located in high density regions tends to be the same as that of the ones in low density regions if their luminosity and the nearest neighbor environment are the same. This strongly supports that galaxy morphology and luminosity evolution have been driven mainly by galaxy-galaxy interactions, and the background density affected morphology and luminosity only through the frequency of interactions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.491-495
• /
• 2004

The industries use polymer materials for many purposes for they have many merits. The costs of these materials take up too great a proportion of the overall cost of products that use these materials as their major material. It is advantage for polymer industries to reduce these costs. The microcellular foaming process was developed in the early 1980s to solve this problem and proved to be quite successful. Microcellular foaming process uses inert gases such as $CO_2$, $N_2$. As these gases solve into polymer matrices, many properties are changed. The microcellular foaming process makes the glass transition temperature of polymers to low, and diminish the residual stress of polymer matrices. Besides, the microcellular foaming process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. This characteristic of microcellular foaming process has influenced by cell morphology. The cell morphology means cell size and cell density. The cell morphology has influenced by many factors. The examples of factor are pressure drop rate, foaming temperature, foaming time, saturation pressure, saturation time etc. Among their factors, pressure drop rate is the most important factor for cell morphology in microcellular foaming injection molding process. This paper describes about the cell morphology change in accordance with the pressure drop rate of microcellular foaming injection molding process.