• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Korean Journal of Ichthyology
• /
• v.12 no.2
• /
• pp.137-145
• /
• 2000

The embryonic and larval development of Chelon lauvergnii (Eydoux & Souleyet) was surveyed by incubating artificially inseminated eggs with parent fishes obtained at Kang-wha island in the mid-western coastal area of Korea on June, 1997. The fertilized eggs were transparent, spherical in shape, measuring 0.95~1.08 mm in diameter, having a large oil globule, and their perivitelline space narrow, and began to hatch at 40 hrs. in water temperature $22{\pm}1^{\circ}C$. The newly hatched larvae were 2.35~2.68 mm in total length with 23 myomeres, anus opened, mouth closed, preanal length 58.7~61.6% of total length, oil globule located in posterior end of yolk sac. Melanophores, branch in shape, were distributed mainly along the ventro-lateral region of trunk part and a few on the anterior end of caudal part and surface of oil globule. The larvae measuring 3.08~3.36 mm in total length absorbed yolk material completely in 3 days after hatching, in which air bladder began to appear and mouth opened. In 8 days after hatching, the larva was measured 5.09 mm in total length, its posterior end of notochord began to flex upward and the caudal fin rays differentiated as 7, finfold of the second dorsal and anal fins appeared. In this time, melanophores, branch in shape, were concentrated in the anterior half region of the caudal part and a few also distributed on the top of head, snout region, ventral margin of lower jaw and isthmus region. In 12 days after hatching, the larva measuring 8.48 mm in total length completed all the fins (D. IV-9; P1. 16; P2. I, 5; A. II, 9) and reached to the juvenile stage. Melanophores, in this time, were distributed on the mid-lateral region of the caudal part in enlargment than before and a few also found in the dorso-lateral region of the trunk part, and in the cheek region.

• Journal of Gastric Cancer
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2007

Purpose: There has been increased the number of early gastric cancer and laparoscopy-assisted gastrectomy (LAG), due to early detection through mass screening program. We started the LAG in April 2004 and performed 119 cases of gastric cancer in 2005, so we report a surgical outcome compared with that of open gastrectomy (OG). Materials and Methods: 119 patients underwent LAG in 2005, and for open group, 126 patiens of early gastric cancer were selected sequentially from January 2005 to March 2005. We compared clinicopathologic characteristics, postoperative courses and complications between two groups. Results: There was no significant difference between age, a length of hospital stay, distal resection margin and a number of retrived lymph nodes. The operation time was longer in LAG group (239.2 vs 123.3 mins, P<0.001) and a diet progression was faster in LAG group (first flatus: 3.05 vs 3.70 days, SOW: 2.86 vs 3.22 days, liquid diet: 3.87 vs 4.19 days, soft diet: 4.84 vs 5.26 days, P<0.001). But there was no difference statistically in postoperative discharge date (7.73 vs 8.25 days, P=0.229). The additional requirement of analgesic injection was less frequent in LAG group (2.97 vs 4.92 times, P<0.001). The harvested lymph nodes were similar in both groups (23.9 vs 23.1, P=0.563). A complication rate was lower in LAG group (4.9% vs 9.5%), but there was no statistical significance (P=0.179). There was no mortality in both groups and no conversion to open gastrectomy in the LAG group. Conclusion: LAG can be performed safely and accepted in view of curative procedure in treatment of early gastric cancer. But we need the follow up of long-term period to evaluate the survival rate and recurrence, and a prospective randomized controlled study should be done to establish that LAG will be a standard operation for early gastric cancer.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.115-136
• /
• 2008

The development of the aviation technology is beyond the people's imagination. For example, with some exaggeration, If the autopilot engage upon take off, You will realize that you are on the centerline of the foggy JFK runway 13R after 15 hours with only once or twice of intervention. But the more aviation technology develops, the more responsible the pilot will be who has the final authority of the aviation safety. In the JAL 706 accident caused by unidentified reason, the pilot increased pitch abruptly and overrode the control from the autopilot. The result of this process made the death of a flight attendant and some injuries of a few passengers. The district court found the pilot not guilty at the first trial on the ground that the control override was not connected to the possibility of foresight and avoidance of the human death. The pilot was proved to be innocent through the analysis of the DFDR and ADAS that the override did not precede the unidentified pitch up motion. The judicial precedent related to aviation accidents in Korea requires pilots' absolute and extended care compared to the ordinarily prudent or reasonably careful behaviors in the vehicle and medical accidents. Although there is some controversy about the standard care, the care required in the actual operation of high tech aircraft by a pilot should include objective and standard care and be judged by analysis of the scientific data. Although the pilot maintained the unusual hi speed that doesn't have safety margin and descended under turbulence in case of the JAL 706 accident, the court negatived its relation to the cause of pitch up. Also, the override of the control after initial pitch up might have caused the possibility of the death and injury, but the court denied it. Because of this complex cause of the aviation accidents, it is important for a court to figure out the core reason of the event and casual relationship with the pilot Now, It is required that the judgement of negligence in the aviation accidents should include an objective care with scientific data from simulated circumstances(or a simulator) as the Japanese court not from the theory of vehicle's negligence.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.4
• /
• pp.498-506
• /
• 1999

Background : The causes of solitary pulmonary nodule are many, but the main concern is whether the nodule is benign or malignant. Because a solitary pulmonary nodule is the initial manifestation of the majority of lung cancer, accurate clinical and radiologic interpretation is important. Bayes' theorem is a simple method of combining clinical and radiologic findings to estimate the probability that a nodule in an individual patients is malignant. We estimated the probability of malignancy of solitary pulmonary nodules with a specific combination of features by Bayesian approach. Method : One hundred and eighty patients with solitary pulmonary nodules were identified from multi-center analysis. The hospital records of these patients were reviewed and patient age, smoking history, original radiologic findings, and diagnosis of the solitary pulmonary nodules were recorded. The diagnosis of solitary pulmonary nodule was established pathologically in all patients. We used to Bayes' theorem to devise a simple scheme for estimating the likelihood that a solitary pulmonary nodule is malignant based on radiological and clinical characteristics. Results : In patients characteristics, the probability of malignancy increases with advancing age, peaking in patients older than 66 year of age(LR : 3.64), and higher in patients with smoking history more than 46 pack years(LR : 8.38). In radiological features, the likelihood ratios were increased with increasing size of the nodule and nodule with lobulated or spiculated margin. Conclusion : In conclusion, the likelihood ratios of malignancy may improve the accuracy of the probability of malignancy, and can be a guide of management of solitary pulmonary nodule.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.29-36
• /
• 1995

Load testis are executed on model reticulated root piles (RRP) to figure out the optimum slanting angle in the piles installation. One set of model RRP consists of 8 slanting piles which are installed in circular patterns forming two concentric circles, each of which is made by 4 piles. Each pile which is a steel bar of 5m in diameter and 300mm in length is coated to become a pile of 6.5mm in diameter. The slanting angle of the model RRP varies from 0$^{\circ}$ to 20$^{\circ}$ Comparing ultimate bearing capacities of the model RRP of different installation angles, it is observed that the ultimate capacities of the RRP increase as the installation angle increases until 15$^{\circ}$, and the optimum slanting angle of the RRP is around 15$^{\circ}$ The ultimate bearing capacity of the 15$^{\circ}$-RRP is found to be 22% bigger than that of the vertical RRP and 120% bigger than that of the circular surface footing whose diameter is same with the circle formed by outer root piles'heads. However, it is noticed that when the slanting angle of the RRP is increased over 15$^{\circ}$, the ultimate capacity starts to be reduced. The ultimate capacity of 20$^{\circ}$-RRP is even smaller than that of the vertical RRP by as much as 5%. From the observation of the load settlement curve obtained during the RRP load tests, it is known that as the slanting angle gets bigger the load -settlement behavior becomes more ductile.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.261-268
• /
• 2012

Breast cancer is the second leading cause of women cancer death in Korea. The key for reducing disease mortality is early detection. Although digital mammography (DM) has been credited as one of the major reasons for the early detection to decrease in breast cancer mortality observed in the last 20 years, DM is far from perfect for several limitations. Digital breast tomosynthesis (DBT) is expected to overcome some inherent limitations of conventional mammography caused by overlapping of normal tissue and pathological tissue during the standard 2D projections for the improved lesion margin visibility and early breast cancer detection. In this study, we compared a DM system and DBT system acquired with different thickness of breast phantom. We acquired breast phantom data with same average glandular dose (AGD) from 1 mGy to 4 mGy under same experimental condition. The contrast, micro-calcification measurement accuracy and observer study were conducted with breast phantom images. As a result, the higher accuracy of lesion detection with DBT system compared to DM system was demonstrated in this study. Furthermore, the pain of patients caused by severe compression can be reduced with DBT system. In conclusion, the results indicated that DBT system play an important role in breast cancer detection.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.2
• /
• pp.95-102
• /
• 2010

Purpose : To evaluate the magnetic resonance imaging (MRI) and clinicopathological features of triple negative breast cancer, and compare them with those of non-triple negative breast cancer. Materials and Methods : This study included 231 pathologically confirmed breast cancers from January 2007 to May 2008. We retrospectively reviewed the MRI findings according to the Breast Imaging Reporting and Data System (BI-RADS) lexicon: mass or non-mass type, mass shape, mass margin, non-mass distribution, and enhancement pattern. Histologic type, histologic grade, and the results for epidermal growth factor receptor, p53, and Ki 67 were reviewed. Results : Of 231 patients, 43(18.6%) were triple negative breast cancer. Forty triple negative breast cancers (93.0%) were mass-type lesion on MRI. A round or oval or lobular shape (p=0.006) and rim enhancement (p=0.004) were significantly more in triple negative breast cancer than non- triple negative breast cancer. In contrast, irregular shape (p=0.006) and spiculated margins (p=0.032) were significantly more in non-triple negative breast cancer. Old age (p=0.019), high histologic grade (p<0.0001), EGFR positivity (p<0.0001), p53 overexpression (p=0.038), and Ki 67 expression (<0.0001) were significantly associated with the triple negative breast cancer. Conclusion : MRI finding may be helpful for differentiation between triple negative and non-triple negative breast cancer.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.149-159
• /
• 2011

Restoring and replacing teeth with fixed prostheses commonly used in dental practice. Because of improper oral hygiene care and inaccurate laboratory procedure, complication of fixed prostheses was found in the mouth of patient. Although many efforts have been continually made to obtain the data of long term prognosis of fixed prostheses, it was difficult to do it. The purpose of this study was to evaluate the clinical status of fixed prostheses to improve the quality of dental care. In order to assess the clinical status of fixed prostheses, a total of 154 individuals (aged 22-82, 88 women and 66 men loaded with 578 unit of fixed prostheses, and 423 abutments) who visited the Department of Prosthodontics, Pusan National University Hospital, between January 2009 to December 2009 and removed old fixed prostheses were examined. The results of this study were as follows: 1. Length of service of fixed prostheses was $10.3{\pm}05.5$ years (mean), 10.0 years (median). 2. Location of fixed prostheses was found to have statistically significant influence on longevity of fixed prostheses (P<.05). The longevity of fixed prostheses was high in anterior-posterior combination region (mean:13.1, median:13.5) than anterior and posterior region. 3. Longevity of fixed prostheses made of metal was longest (mean:13.3, median:12.3). 4. Number of units in fixed prostheses was found to have no statistically significant influence on longevity of fixed prostheses (P>.05). 5. Condition of opposing dentition was found to have statistically significant influence on longevity of fixed prostheses (P>.05). The fixed prostheses lasted longest when opposed by complete denture (mean:17.1, median:19.7), removable partial denture, fixed prosthesis and natural dentition trailing behind (P<.05) 6. Periodontal disease (37.5%), dental caries (19.0%), defective margin (18.4%) were frequent complications. In 33.1% of the cases, abutment state after removing fixed prostheses was needed to be extracted.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.209-222
• /
• 2011

Missing anterior teeth can be replaced using any of a number of methods. Patients may choose to replace missing teeth with a prosthesis that is either removable, fixed, or retained with implants. For patients faced with financial, anatomical, and/or esthetic limitations, the edentulous region can be restored successfully and esthetically with a properly designed and fabricated rotational path RPD. The rotational path RPD is a partial removable dental prosthesis that incorporates a curved, arcuate, or variable path of placement allowing one or more of the rigid components of the framework to gain access to and engage an undercut area. The rigid retainer must gain access to the infrabulge portion of the tooth by rotating into place. Either a minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface. A specially designed dovetails or asymmetric rest seats provides support and embracing effects. Correctly designed and fabricated rotational path RPD can provide improved esthetics, cleanliness, and retention. But rotational path RPDs are technique sensitive since the rotational path RPD has little margin of laboratory error that rigid retainers cannot be adjusted like conventional clasps can, RPD framework must be remade once the retention is lost. The sufficient understanding of the concept for the rotational path RPD is required for clinically successful treatment. This clinical report describes in detail the theoretical, laboratory considerations and the treatment of a patient with an anterior maxillary edentulous area treated by an AP path rotational RPD that had a difficulty in long term maintenance and describes another clinical case in which more reasonable treatment procedures were approached after analyzing the former case.