• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1048-1059
• /
• 2003

This study focusses pattern draft and grading of jeans for women in their 20s, who consume jeans the most. Pattern was drafted based on existing patterns collected from companies. It is different from the existing educational patterns. It suggests new sizing system for twenties referring to sizes used companies and grading rule and method. he results were as follows; 1. Companies manufacture 2-8 sizes and they referred to the Korean Industrial Standards, KS K 0051, for their sizing system. 2. Drawing method for Pattern of the study had following measurements for each part: in the case of waist circumference, front part was W/4+1.5cm, back part was W14+2cm, front hip circumference was H/4-1.5cm, crotch line was the crotch length (practical measurement), hip circumference was (upper crotch line length)/5+0.5cm, front crotch part was 2.7cm, back crotch part was W/5+2.7cm, knee height was (the length of leg)/2+6cm and the circumference of knee and the tip of pants were 40cm. Through the wearing test on the subject of twenties, researched pattern received higher ratings, especially in appearance than the existing pattern. 3. 5 sizes system was made referred to the sizing system of companies and National Anthropometric Survey of Korean in 1997 Grading rule for 12 grading points of front part and 13 grading points of back part was suggested. Results of wearing test on the graded patterns showed high ratings similar to standard size.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.123-131
• /
• 2024

Plastic, the main material of FFF-type 3D printing, exhibits lower strength compared to metal. research aimed at increasing strength is needed for use in various industrial fields. This study analyzed three X-shape infill patterns(grid, lines, zigzag) with similar internal lattice structure. Moreover, tensile test considering weight and printing time was conducted based on the infill line multiplier and infill overlap percentage. The three X-shape infill patterns(grid, lines, zigzag) showed differences in nozzle paths, material usage and printing time. When infill line multiplier increased, there was a proportional increase in tensile strength/weight and tensile strength/printing time. In terms of infill overlap percentage, the grid pattern at 50% and the zigzag and lines patterns at 75% demonstrated the most efficient performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.481-483
• /
• 2015

In order to understand the characteristics of the LCD, we make Vertical Alignment Liquid Crystal Cell and check the pattern that appears in Cell flowing a current. After giving different rubbing directions on made cell, check and compare various patterns appeared on the cell, research the cause of the patterns. When we apply a current to the cell, lines appear on the cell. We find that higher voltage and frequency make many lines on the cell.

• Journal of the Korean Society of Costume
• /
• v.50
• /
• pp.5-22
• /
• 2000

The study on the past costume should be done first for the creation of new style of fashion. That is one of the reasons why we have to annalize characteristic style in each period. Before the latter of nineteenth century one must have made the costume by draping design. Because the complicated clothes can be expressed by draping deign think that the subject draping design is even more important than other subject. But there haven't been the studies that analyzed the pattern of Art Nouveau style by draping design in Korea. Art Nouveau style is a certain one that was relatively more changeable than the ones of other periods. The purpose of this study is the analysis about the patterns of hourglass and S-curve style which represented the Art Nouveau style. The results of the study summarized as follows. 1. Bodice pattern : In the front Hourglass silhouette has the princess line for fitting bodice while S-curve silhouette has the wide midriff due to the blousing. There is the yoke in S-curve one. In the pattern of back bodice we can't see the much differences but Hourglass silhouette is used the princess line like the front one while S-curve is made use of the waist darts for fitting back. 2. Sleeve pattern : Hourglass silhouette is made of two pieces the upper part and lower part besides S-curve is consisted of one pieces. The former has the big upper part in order to the emphasis of the shoulder and the tight lower part. The latter is the tight sleeve that similar to the basic sleeve pattern at present. 3. Skirt pattern: There is partially a gored line in the front skirt in Hourglass silhouette however S-curve silhouette is consisted of the six pieces gored skirt. At this part we can also see the fact that s-curve is more complicated than Hourglass silhouette. 4. Others: Wecan find out the differences between Hourglass and S-curve pattern easily at the parts of the collar flounce wing and so on. Summing up, the patterns of S-curve style are more expanded than those of Hourgalss style for the most part.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.225-231
• /
• 2006

On-line shopping allows consumers to order goods via internet and receive them at homes or workplaces. Emergence of online shopping industry has brought the changes in the structure of freight industry, in the location selection pattern of industrial clusters and in the consumer's travel pattern. This trend is likely to continue, especially in Korea, as the society sees increases in women's participation in workforce, in population of the elder and in production pattern of manufacturing individually customized goods. Despite on-line shopping's heavy influence on travel demand, no study on this particular topic has been done yet, and thus the effect of on-line shopping on travel demand has not been properly reflected on policy making process. This paper suggests the transportation strategy to cope with this change based on the analysis of the effect of on-line shopping on personal travel demand.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.617-627
• /
• 2010

This study selected and compared 7 tailored collar making factors from 15 clothing construction university textbooks. According to the results, in 15 clothing construction textbooks, the neckline of a tailored collar was drawn at the same length as the back neck circumference of the bodice and the length of collar stand was 3cm in 10 textbooks. In addition, the length of the collar laying varied between 2cm and 4.5cm regardless of the width of the upper collar or the textile thickness. In 7 out of the 15 textbooks, the gorge line of the collar was drawn by illustrating the collar pattern on the bodice based on the roll line and then copying it symmetrically. On the other hand, the pattern of upper collar was made in 5 ways; and 2 books did not give any explanation in the sections dealing with patterns or sewing. In addition, 6 textbooks explained that inner and outer collars are sewn with a difference. The lapel pattern of the facing part was made in 4 ways; in addition, 3 textbooks did not provide an explanation and 4 books explained that the difference is given in the sewing. The textile thickness and elasticity need to be considered in collar pattern making; however, they were not specifically mentioned in most of the textbooks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.841-849
• /
• 2001

The pixel information of the object was obtained sequentially and pixels were clustered to a label by the line labeling method. Feature points were determined by finding the slope for edge pixels after selecting the fixed number of edge pixels. The slope was estimated by the least square method to reduce the detection error. Once a matching point was determined by comparing the feature information of the object and the pattern, the parameters for translation, scaling and rotation were obtained by selecting the longer line of the two which passed through the matching point from left and right sides. Finally, modified Hausdorff Distance has been used to identify the similarity between the object and the given pattern. The multi-label method was developed for recognizing the patterns with more than one label, which performs the modified Hausdorff Distance twice. Experiments have been performed to verify the performance of the proposed algorithm and method for simple target image, complex target image, simple pattern, and complex pattern as well as the partially hidden object. It was proved via experiments that the proposed image matching algorithm for recognizing the object had a good performance of matching.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.1
• /
• pp.11-16
• /
• 2014

Objectives: The aim of this study was to evaluate the pattern of lingual split line when performing a bilateral sagittal split osteotomy (BSSO) for asymmetric prognathism. This was accomplished with the use of cone-beam computed tomography (CBCT) and three-dimensional (3D) software program. Materials and Methods: The study group was comprised of 40 patients (20 males and 20 females) with asymmetric prognathism, who underwent BSSO (80 splits; n=80) from January 2012 through June 2013. We observed the pattern of lingual split line using CBCT data and image analysis program. The deviated side was compared to the contralateral side in each patient. To analyze the contributing factors to the split pattern, we observed the position of the lateral cortical bone cut end and measured the thickness of the ramus that surrounds the mandibular lingula. Results: The lingual split patterns were classified into five types. The true "Hunsuck" line was 60.00% (n=48), and the bad split was 7.50% (n=6). Ramal thickness surrounding the lingual was $5.55{\pm}1.07$ mm (deviated) and $5.66{\pm}1.34$ mm (contralateral) (P =0.409). The position of the lateral cortical bone cut end was classified into three types: A, lingual; B, inferior; C, buccal. Type A comprised 66.25% (n=53), Type B comprised 22.50% (n=18), and Type C comprised 11.25% (n=9). Conclusion: In asymmetric prognathism patients, there were no differences in the ramal thickness between the deviated side and the contralateral side. Furthermore, no differences were found in the lingual split pattern. The lingual split pattern correlated with the position of the lateral cortical bone cut end. In addition, the 3D-CT reformation was a useful tool for evaluating the surgical results of BSSO of the mandible.

• Journal of the Korean Society of Costume
• /
• v.63 no.6
• /
• pp.56-68
• /
• 2013

A purpose of this study is to do fundamental research of construction of coat patterns in the Daehan Empire in order to make replicas of the costumes. This study is composed of literature research, investigation of artifacts, and experiment of pattern making. The results of this study are as follows. First, even if the 15th Court Dress Rules regulated color, fabric, number of flower, width of braid, and size of button, there was no regulation regarding the shape of the coat. The analysis of the photos in those periods shows that the style of the tailcoat was different from that of today in the length of the front, the shape of breast and collar. Second, six artifacts in the collection showed that the shoulder line and the sideline were located on the further rear side than the current tailcoat. This can be confirmed in the western and Japanese pattern book, and especially the pattern drafting method in the books published in Japan in 1900s is different from current one in setting base lines of front bodice and back bodice. As a result, based on several experiments, this study proposes how to make coat patterns. The shoulder line, the sideline, and the princess line should be located in the back of the dress similar to the shape of swallowtail coats of 1900s. The front bodice should be constructed without the composition line in order to add embroidery on it. The collar, which shape looks like long half moon, should form V-shape neckline in the front breast when adjusting dress. The sleeves should be constructed top and down, and it should curve more than the modern design.