• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.189-195
• /
• 2009

This study was performed to investigate the emergence timing and daily emergence from the different tree species logs (Korean white pine, Pine, and Japanese larch) at Cheongwon, Chungcheongbuk-do from 2006 to 2008. Pine sawyer adults began to emerge on early May (2${\sim}$10th day) and finished on mid-June (4${\sim}$20th day) in the Korean white pine and pine logs. However, pine sawyer adults began to emerge on mid-May (13th day) and finished late May (27th day) in Japanese larch logs, Japanese larch logs shows shorter emergence timing of pine sawyer adult compare to those of other two tree species. Emergence timing shows no difference between males and females. Sex ratios of emerged adult in 2007 were 0.55 from Korean white pine, 0.46 from Pine, and 0.59 from Japanese larch; it shows no difference among tree species. Female and male adults emerged throughout 24 hrs; 22.8% of the total adults emerged from 12${\sim}$14:00 (22.8%) and adults emerged lowest from 06${\sim}$08:00. Of the adults emerged from the logs, 98.9% was univoltine and the rest was biennial which emerged next year.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.13-22
• /
• 2007

This study was carried out to scrutinize possibility of manufacturing pitch pine (Pinus rigida) glued laminated timber in order to add values of pitch pine trees. Also, it was investigated to improve bending performance of pitch pine glulam. Pitch pine was imported as one of major plantation species in Korean peninsula. Machine stress rated grades of pitch pine lumber mostly ranged between E7 and E9. which grades were more or less inferior to producing high quality glulam. However, the adhesive properties between pitch pine and pitch pine, and between pitch pine and Japanese larch (Larix kaempferi Carr.), such as shear bond strength, wood failure rate and de-lamination rate of bonded layer submerged in cold and boiling water, were higher than Korean Standard criteria. These properties are essential for manufacturing glulam with single species or multiple species. The modulus of rupture (MOR) of pitch pine glulam exceeded the criterion of Korean Standard for glulam strength grade but modulus of elasticity (MOE) was lower than the criterion. On the other hand, the bending performances (MOR and MOE) were improved 20 percent by mixing with Japanese larch laminar. It is effective to arrange higher quality Japanese larch laminar at the outer layer of glulam for improving bending performances. In conclusion, it is possible to use low quality pitch pine as laminar of structural glulam for adding values of pitch pine.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.42-47
• /
• 2000

This study was designed to investigate the effect of treatment variables on CCA treatment of Japanese red pine (Pinus densiflora), Japanese larch (Larix leptolepis), and ezo spruce (Picea jezoensis) round posts. Variables included were duration of initial vacuum (30, 45, or 60 minutes) and maximum pressure applied (8.5, 10.5, or 14.0 kg/$cm^2$), and maximum pressure was maintained until refusal point was reached. Regardless of wood species, extending the duration of initial vacuum more than 30 minutes did not affect treatability. Increasing pressure did not affect preservative penetration; however, preservative retention was affected by pressure levels, particularly at higher level (14.0 kg/$cm^2$). Preservative penetration depth of Japanese red pine met a minimum requirement specified by Notification of Korean Forestry Administration (No. 1999-8) for hazard class H5 of CCA-treated wood. Penetration of preservative in both Japanese larch and ezo spruce was not deep because of shallow sapwood thickness of these species, so pretreatment such as incising should be considered if these species are treated with preservatives. Although retention in Japanese red pine was not significantly increased even with 14.0 kg/$cm^2$, that of refractory Japanese larch and ezo spruce was significantly increased with the application of 14.0 kg/$cm^2$. Effect of treatment variables on refusal time was unclear; however, it is cleared that the refusal time was shortened with the increase in sapwood thickness.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2012

This study was carried out to determine the relationships between cellulose decomposition and soil environmental factors in larch (Larix leptolepis) and pine (red pine: Pinus densiflora; rigitaeda pine: P. rigida ${\times}$ P. taeda) species planted in the same year (1963). The variation of cellulose mass loss with soil temperature, soil pH, soil $CO_2$ efflux rates, and soil water content was measured monthly for 4 months (July, August, September and October 2006) from three coniferous plantations. Mean mass loss rates during the study period were generally more rapid in rigitaeda pine (6.5 $mg\;g^{-1}\;day^{-1}$) than in red pine (6.2 $mg\;g^{-1}\;day^{-1}$) or larch (6.1 $mg\;g^{-1}\;day^{-1}$) plantations, although the mass loss rates were not significantly different among three tree species (P > 0.05). Cellulose mass loss rates among three tree species were positively correlated with soil temperature (red pine: r = 0.77, P < 0.05; rigitaeda pine: r = 0.59, P < 0.05; larch: r = 0.48, P < 0.05) at the 20 cm soil depth, while the mass loss rates were negatively correlated with soil pH (red pine: r = -0.63, P < 0.05; rigitaeda pine: r = -0.47, P < 0.05; larch: r = -0.43, P < 0.05). There was a significant correlation between cellulose mass loss and soil $CO_2$ efflux rates except for regitaeda pine plantation, while no significant correlation (P > 0.05) between cellulose mass loss and soil water content in larch or rigitaeda pine. The results suggest that cellulose mass loss rates in soil layers depend on the different soil environmental factors caused by tree species.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.30-37
• /
• 2013

The objective of this research was to understand herbicidal activity of essential oils isolated from leaves of pine (Pinus densiflora), nut pine (Pinus koraiensis), larch (Larix kaempferi) and khingan fir (Abies nephrolepsis) in Korea. In a seed bioassay, essential oils of nut pine, larch and khingan fir inhibited the growth of rapeseed (Brassica napus) seedlings by 50% at 4,766, 1,865, $5,934{\mu}g\;ml^{-1}$, respectively, however, that of pine did not show any herbicidal effect. In a green house experiment, fall panicum, Southern crabgrass, sorghum, barnyardgrass, quackgrass, black nightshade, Indian jointvetch, velvet leaf, and Japanese morningglory were controlled in 24 hours by the foliar application of 10% essential oils from pine, nut pine, larch and khingan fir. The treated plant parts showed burndown effect, however, new shoots appeared 3 days after treatment. Results of GC-MS analysis showed that essential oils from pine, nut pine, larch and khingan fir contained 16, 25, 25, and 16 compounds, respectively, with hydrocarbons, alcohols, ketones, and esters. The major compounds of the essential oils were 3-carene, bornyl acetate, camphene, limonene, ${\alpha}$-pinene, ${\beta}$-pinene and ${\beta}$-phellandrene.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.481-489
• /
• 2011

This study was conducted to evaluate the pressure treatment characteristics of Japanese red pine and Japanese larch skin timber with ACQ-2, CUAZ-2 and CuHDO-1. The effect of moisture content (MC) on preservative treatability was investigated for Japanese red pine sapwood and Japanese larch heartwood, and fixation characteristics of CCA alternatives was also evaluated. Japanese red pine sapwood, which was dried below 30 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring preservative retention gradient in Japanese red pine sapwood, it was confirmed that the retention gradient of CuHDO-1 was steeper than that of both ACQ-2 and CUAZ-2. In particular, it was intensified at a higher MCs of wood samples (25∼30%). Japanese larch heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. With presteaming under $121^{\circ}C$ for 12 hours, the treatability of Japanese larch heartwood was enhanced to meet the minimum requirement for the hazard class H3. The fixation rate of copper was much more faster under drying condition compared with nondrying condition; more than 95% of copper were fixed in 3~6 days and 1 day under drying conditions in Japanese red pine sapwood and Japanese larch heartwood, respectively. After 3-week fixation period at ambient temperature, the amount of mobile copper in treated wood sample that remains available for leaching from treated wood was the highest in the wood samples treated with ACQ-2, followed by CuHDO-1 and CUAZ-2. It was proportional to the amount of copper in treating solution.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.67-72
• /
• 1993

Hot water extractives of sawdust/particle from domestic and foreign wood species, which were composed of pitch pine, Korean pine, larch, Italy poplar, acacia and oak as Korean wood species, Malaysian oil palm and German spruce were quantitatively analyzed with thin layer chromatography. Sugar components of saccharose, galactose, glucose, fructose and arabinose were contained in these wood species. It was assumed that arabinose and glucose are major inhibitory components against cement hardening in larch and oil palm, respectively, since both species contain a large amount of each sugar. In contrast, fructose might not influence so badly on a cement hardening, when considering that fructose was contained much in Italy poplar with a good cement hardening character. Galactose was a minor component.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.40-46
• /
• 1996

It is well-known fact that dimensional stability of wood is greatly enhanced by acetylation of wood. This dimensional stability results from bulking of the reacted acetate within the cell wall, which reduces further swelling when the modified woods corne into contact with water or water vapor. The purpose of this research was to determine the water absorption and dimensional stability of the acetylated solid wood in liquid water and in humidity tests. Radiata pine, Siberian larch, and Japanese larch were acetylated. Antiswelling efficiency(ASE) and equilibrium moisture content(EMC) of acetylated wood, at 95% RH and $20^{\circ}C$ after 4weeks, was quite dependent on WPG, but was not dependent on species.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.12-17
• /
• 1987

To extract arabinogalactan from larch (Larix Leptolepis), chips immersed with water(20-$90^{\circ}C$) for 1hr, were defiberized by refiner. The liquors were recovered and purified to pure arabinogalactan by ion exchange resin(IRC-50 a. IR-45) or MgO. Additionally the optimal condition in purification with MgO was also investigated. 1. The amounts of solids(crude sugars) and pure arabinogalctan in solids are 8.6-11.3% and 7.3-8.5%(raw material = 100), respectively. 2. Phenolic materials in crude sugars are removed up to 96-89% by ion exchange resin and 94-88% by MgO, while recovery yields of pure arabinogalactan are 81-75% on purification with ion exchange resin and 91-87% on purification with MgO. 3. The optimal conditions of purification with MgO are the addition of 35mg MgO/0.5g of crude sugars, 45 minutes at $70^{\circ}C$, or 25 mg MgO, 30 minutes at $85^{\circ}C$.