• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2249-2253
• /
• 2011

본 논문에서는 저전력 u-IT 기기의 기술 기준에 대한 현재 각국의 동향과 그 기준치를 분석 및 비교를 통하여 해당 대역의 국내기준의 문제점을 분석하였다. 전자파 적합 등록에서 제시하고 있는 각국의 출력기준 기준치와 연계하여 이에 적합한 국내의 u-IT 기기의 실질적인 도입 가능한 출력 기준의 기준치를 제시함을 목적으로 한다. 본 논문에서 제시한 출력 기준 허용치를 바탕으로 국내 기준을 상향하면 저전력 u-IT 기기의 보급과 발전에 기여할 것으로 예상되며 국내 통신 시장은 물론 국제 통신 시장에서 경쟁력을 갖출 수 있을 것으로 예상된다.

• 대한산업공학회지
• /
• 제30권3호
• /
• pp.205-212
• /
• 2004

This paper proposes the variables repetitive group sampling plan where the quality characteristic following normal distribution has upper or lower specification limit. The problem is formulated as a non-linear programming problem where the objective function to minimize is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level (AQL) and limiting quality level (LQL) under the operating characteristic curve. Sampling plan tables are constructed for the selection of parameters indexed by AQL and LQL in the cases of known standard deviation and unknown standard deviation. It is shown that the proposed sampling plan significantly reduces the average sample number as compared with the single or the double sampling plan.

• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.31-42
• /
• 2007

Recently, concerns regarding indoor air quality in offices have continued to increase. Thirty offices in five metropolitan commercial buildings were surveyed from February to April 2004. Sampling was performed during normal business hours. Thermal comfort factors such as temperature and relative humidity, carbon dioxide ($CO_2$), carbon monoxide (CO), formaldehyde (HCHO), respirable dust, $PM_{10}$ were sampled and analyzed to determine the mean, standard deviation, range, and correlation for each of those parameters. The data was then compared to office as standard of Ministry of Labor, and guideline applicable to the indoor environment. The results represented that the temperature was slightly higher than the standard of American Society of Refrigerating and Air-Conditioning Engineers (ASHRAE), the relative humidity was lower that the standard of ASHRAE. The range of the 8-TWA concentration of $CO_2$ was 639 ~ 786 ppm, but 33.3% of the total thirty offices exceeded the 1000 ppm as ceiling concentration. The concentration of CO was less than 3 ppm, which was similar to that of offices in Japanese. The mean concentration of formaldehyde was 0.032 ppm, and only 2 % of total samples (193) exceeded the 0.1 ppm, standard of formaldehyde in office air. The concentration of respirable dust and $PM_{10}$ was not exceeded the standard of those parameters, $150{\mu}g/m^3$. The concentration of those parameters in the office air was statistically correlated.

• 한국물환경학회지
• /
• 제29권2호
• /
• pp.276-287
• /
• 2013

Domestic sewage contains increasingly more pharmaceuticals and personal care products (PPCPs), due to rising use of medicines, health supplement food and daily necessities. And various types of industrial wastewater from pollution sources in treatment areas could flow into the public sewerage treatment plants (PSTPs) in metropolitan areas. The conventional PSTPs are designed to treat suspended solids, biodegradable organics, nitrogen and phosphorous from residential and industrial areas and public facilities. However, toxic, conventional, and non-coventional pollutants from non-domestic sources that discharge into sewer system as well as domestic source with various chemicals could not be treated in the conventional PSTPs and discharged untreated to public basin. In this paper we aim to consider the establishment system of effluent standard of PSTPs in comparison with water quality standard of water environment and wastewater discharge regulation. And also we suggest the necessity of regulations on the pretreatment of industrial wastewater as part of efforts to improve water quality in sewerage systems and to protect public basin.

• Environmental Analysis Health and Toxicology
• /
• 제25권1호
• /
• pp.27-40
• /
• 2010

The current study was designed to scientifically evaluate the atmospheric particulate pollution in residences relative to their proximity to a Korean major iron/metal industrial complex (IMIC). This objective was achieved by measuring the concentrations and elemental composition of particulate matter with aerodynamic diameters equal to or less than 10 ${\mu}m$(PM10) in industrial ambient air from IMIC and residential ambient air with relative proximities to IMIC. The trace metals were analyzed using an inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The industrial mean values exceeded the Korean year/70-${\mu}g/m^3$ standard for PM10, whereas the residential mean values did not. However, the maximum residential values did exceed or were close to the Korean PM10 year standard. For individual elements, the ambient concentrations ranged widely from values in the order of a few $ng/m^3$ to thousands of $ng/m^3$. The residential mean mass concentrations in the PM10 measured in the present study were higher than or similar to those reported in earlier studies. This study suggests that residents in neighborhoods near the IMIC are exposedto elevated particulate levels compared to residents living further away from such a source.

• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.127-135
• /
• 2016

Korean automobile industrial is in a difficult situation because of more competitive global market and lower demand. Therefore, domestic as well as global automobile manufacturers are making greater efforts in cost reduction to strengthen the competitiveness. According to statistical data, logistics cost in domestic manufacturers is higher than advanced countries. In this study, we developed program to effectively manage standard time of procurement logistics, and confirm based on A-automobile factory data. For the purpose, we develop the system which is possible to manage standard time as well as calculate man-hour. Program is not just for calculating and managing standard man-hour, scenarios analysis function will be added to calculate benefit while introduce logistics automated equipment. In this study we propose scenario using AGV instead of electric motor while move component. In the scenario analysis, job constitution is changed, and then we use system to compare the result. We can confirm standard man-hour is reduced from 22.3M/H to 14.3M/H. In future research, it is necessary scenario analysis function, and develop algorithm with realistic constraint condition.

• 산업공학
• /
• 제20권2호
• /
• pp.177-185
• /
• 2007

e-Business in healthcare sector has been called e-Health, which is evolving into u-Health with advances of ubiquitous technologies. Seamless information sharing among health organizations is being discussed in many nations including USA, UK, Australia and Korea. Efforts for establishing the electronic health record (EHR) system and a nation-wide information sharing environment are called NHII (National Health Information Infrastructure) initiatives. With the advent of u-Health and progress of health information systems, information security issues in healthcare sector have become a very significant problem. In this paper, we analyze several issues on health information security occurring in u-Health environment and develop an information security standard for protecting health information. It is expected that the standard proposed in this work could be established as a national standard after sufficient reviews by information security experts, stakeholders in healthcare sector, and health professionals. Health organizations can establish comprehensive information security systems and protect health information more effectively using the standard. The result of this paper also contributes to relieving worries about privacy and security of individually identifiable health information brought by NHII implementation and u-Health systems.

• 한국한의학연구원논문집
• /
• 제10권1호
• /
• pp.97-105
• /
• 2004

1. To define 'Korean medicine industry' through study on existing medicine related industries, Korean medicine industry means all industrial activities related to Korean medicine. It covers material resources such as herbs and products made with herbs, medical instruments, Korean medical service and related information service based on Korean medicine theories. 2. According to Korea National Statistical Office standard industrial branch, Korean medicine industry was classified as a large branch. There were industries such as agriculture, food and beverage manufacture, publishing, copy of prints and record media, manufacture of compound and chemical products, medical service, manufacture of precise optical instruments, wholesale trade and product mediation, retail trade, restaurant, research and development, education service, health preservation service, entertainment, culture and sports industry related to the Korean medicine industry. 3. If we classify this according to the industry branch of English economists Clark, Colin Grant, herb cultivating industry will be classified as primary industry, manufacture of foot and beverage related to Korean medicine, secondary industry and wholesale and retail sales of herb, research and development, education, health preservation, social welfare, tertiary industries.

• 한국안광학회지
• /
• 제11권4호
• /
• pp.351-355
• /
• 2006

본 연구는 국내 콘택트렌즈의 규격화 현황에 관하여 연구하였다. 최근 콘택트렌즈의 착용률이 증가하고 있음에도 불구하고 한국 산업 규격은 단지 국제 표준화 기구인 ISO(International Organization for Standardization)의 규정을 그대로 번역하여 사용하고 있으며, 아직 국내의 독자적인 규정이 없는 상태이다. 따라서 본 연구는 콘택트렌즈의 ISO(국제표준화 규격)를 조사, 연구하여 국제 규격이 우리의 현 실태와의 어느 정도 부합되는지와 이에 따른 문제점을 파악하여 개선되어야 할 부분에 대해 연구하였다.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.241-246
• /
• 2013

For effective and efficient environmental management, developed countries, such as the Netherlands, UK, Australia, Canada, and United States apply ecological risk assessment, and they have an autonomous risk assessment methodology to protect native receptors. In this study, soil ecological protective concentration (EPC) of cadmium in Korea was derived using Korean ecological risk assessment methodology. The soil EPC of cadmium was calculated using probabilistic ecological risk assessment based on species sensitivity distribution. The soil EPC was calculated according to land use for residential/agricultural and industrial/commercial purposes. The chronic soil EPCs for residential/agricultural and industrial/commercial lands were derived to be 1.58 and 9.60 mg/kg, respectively. These values were similar to soil EPC of European Commission, the Netherlands, UK, and Canada. However, these values were lower than the established Korean soil standard, because the current soil standard was based on human risk. Therefore, the impact on an ecosystem when establishing environmental standard should be considered.