• 한국컴퓨터정보학회논문지
• /
• 제13권5호
• /
• pp.219-227
• /
• 2008

제약만족문제(Constraint Satisfaction Problem)의 연구에서 밝혀졌듯이, 제약최적화 문제(Constraint Optimization Problem)를 효율적으로 풀기 위해서는 변수순서화의 경험적 방법이 매우 중요하다. 이기종이 혼합된 무선 센서 네트웍의 에너지 효율적인 집단화 같은 문제는 클러스터 헤드가 기지국에 가깝게 위치하려는 경향이 있다. 본 논문은 이 집단화 문제를 풀기 위해서 정적 우선순위 변수 순서화에 기반을 둔 새로운 접근방법을 제시하고. pnode 라는 새로운 알고리즘을 제안한다. 이 pnode 알고리즘은 우선순위가 가장 높은 변수를 다음 변수로 선택한다. 집단화문제에 있어서 우선순위가 높다는 것은 클러스터 헤드가 최적지역에 근접하게 된다는 것을 의미하며 이것은 문제의 성격상 미리 정해진다. 클러스터화 된 센서 네트웍에서 클러스터 헤드는 에너지 소비가 가장 많이 일어나는 곳이기 때문에 센서 노드뿐만 아니라 클러스터 헤드에서 발생하는 최대 에너지 소비를 최소화하도록 만드는 방법을 찾는 것이 본 논문의 목적이다. pnode알고리즘을 사용하여 시뮬레이션 한 결과 제안된 방법이 다른 방법들보다 우수함을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.446-454
• /
• 2021

Critical heat flux (CHF) has traditionally been evaluated using look-up tables or empirical correlations for nuclear power plants. However, under complex moving condition, it is necessary to reconsider the CHF characteristics since the conventional CHF prediction methods would no longer be applicable. In this paper, the additional forces caused by motions have been added to the annular film dryout (AFD) mechanistic model to investigate the effect of moving condition on CHF. Moreover, a theoretical model of the natural circulation loop with additional forces is established to reflect the natural circulation characteristics of the loop system. By coupling the system loop with the AFD mechanistic model, a CHF prediction program called NACOM for natural circulation loop under moving condition is developed. The effects of three operating conditions, namely stationary, inclination and rolling, on the CHF of the loop are then analyzed. It can be clearly seen that the moving condition has an adverse effect on the CHF in the natural circulation system. For the calculation parameters in this paper, the CHF can be reduced by 25% compared with the static value, which indicates that it is important to consider the effects of moving condition to retain adequate safety margin in subsequent thermal-hydraulic designs.

• 한국재난정보학회 논문집
• /
• 제17권1호
• /
• pp.53-59
• /
• 2021

연구목적 및 방법: 본 논문은 지반구조물 계측센서의 내구연한 기준에 대한 분석적 연구로 국내 건설공사 발주기관의 건설 계측센서에 대한 내구연한 기준과 조달청의 건설계측 및 건설기계 관련 내용연수 기준을 분석하였다. 연구결과: 지반구조물에 설치되기 전 조달청에서 물품 자체로 구매하는 경사계와 변형률계 등의 내구연한 기준은 8년에서 10년을 제시하고 있다. 결론: 국내외 댐에 설치된 각종 계측센서의 신뢰성 비교를 통한 실제적인 내구연한 분석과 터널에 설치된 유지관리 계측센서의 경과연수에 대한 손망실율 등을 종합 검토한 결과 구조물이나 지반에 설치된 국내 간극수압계 및 토압계 등의 매립식 계측센서의 적정 내구연한은 5년에서 8년이 합리적인 것으로 판단된다.

• 터널과지하공간
• /
• 제29권2호
• /
• pp.124-134
• /
• 2019

암석에서의 임계하 균열성장은 단조 및 반복하중 하에서 일어날 수 있다. 임계하 균열 성장은 암반에 건설되는 지하구조물의 장기 안정성의 평가에 큰 영향을 미친다. 본 연구에서는 모사 암석 시료를 사용하여 단조 및 반복하중 하에서의 임계하 균열성장 지수를 구하였다. 단조하중 조건에서는 일정 응력 속도법이 적용되었으며, 반복하중에 의한 임계하 균열성장 지수는 반복에 의한 균열성장 속도와 응력확대계 수폭의 관계를 이용하였다. 연구에 사용된 시험편은 $45^{\circ}$와 $60^{\circ}$의 균열 경사각을 가지고 있으며, 균열의 간격 및 연속성에 변화를 주어 전단 또는 인장에 의한 균열성장이 가능하도록 하여 전단 또는 인장에 의한 임계하 균열성장 지수도 구하였다. 그 결과, 임계하 균열성장 지수 n은 작용하는 하중 조건, 즉 단조 및 반복하중, 혹은 전단 및 인장에 관계없이 거의 일정한 값을 나타내었다.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.111-122
• /
• 2018

The purpose of this study was to investigate the bodice prototype method suitable for the upper body shape of old-old aged women using the 3D anthropometric data. And it was to provide the basic data for the upper body garments of old-old aged women. In the overall appearance evaluation, the B pattern was rated as 4.00, and it was evaluated as the most suitable for the bodice prototype of the old-old aged woman. The E pattern was rated lower than normal, and the L pattern and the S pattern were found to be inadequate for older female bodice prototypes. As a result of the measurement of the waist and bust air gap of bodice prototype, the air gap of the bust was not significantly different between the patterns. But the waist air gap showed the largest difference between the L pattern and the S pattern. As a result of evaluating the appearance, the amount of space in the state of 3D simulation, and the air gap, the pattern B appeared to be the most appropriate prototype for the old-old aged women's body shape. However, there is a tendency that the shoulder end point is biased toward the back, so it is necessary to set the inclination of the back shoulder line to be more gentle. Conversely, the front shoulder should be more inclined. In the case of the 3D simulation, the B pattern showed that the other parts generally fit well. In the case of the 3D simulation program used in this study, it was evaluated that it is suitable only for the normal body shape because it is impossible to set the isometric angle which is one of the characteristics of the older female body shape. A study on the bodice prototype suitable for the bent body shape should be carried out through experiments on the actual body shape of various elderly women. In order to cope with the increase of elderly people who are familiar with digital, I think it is necessary to develop an avatar that reflects the old female body shape.

• Clinics in Shoulder and Elbow
• /
• 제22권1호
• /
• pp.16-23
• /
• 2019

Background: We aimed to evaluate whether the use of our novel patient-specific guide (PSG) with 3-dimensional reconstruction in reverse total shoulder arthroplasty (RTSA) would allow accurate and reliable implantation of the glenoid and humeral components. Methods: 20 fresh-frozen cadaveric shoulders were used. The PSG group (n=10) and conventional group (n=10) was evaluated the accuracy and reproducibility of implant positioning between before and after surgery on the computed tomography image. Results: The superoinferior and anteroposterior offset in the glenoid component were $0.42{\pm}0.07$, $0.50{\pm}0.08$ in the conventional group and $0.45{\pm}0.03$, $0.46{\pm}0.02$ in the PSG group. The inclination and version angles were $-1.93^{\circ}{\pm}4.31^{\circ}$, $2.27^{\circ}{\pm}5.91^{\circ}$ and $0.46^{\circ}{\pm}0.02^{\circ}$, $3.38^{\circ}{\pm}2.79^{\circ}$. The standard deviation showed a smaller difference in the PSG group. The anteroposterior and lateromedial humeral canal center offset in the humeral component were $0.45{\pm}0.12$, $0.48{\pm}0.15$ in the conventional group and $0.46{\pm}0.59$ (p=0.794), $0.46{\pm}0.06$ (p=0.702) in the PSG group. The PSG showed significantly better humeral stem alignment. Conclusions: The use of PSGs with 3-dimensional reconstruction reduces variabilities in glenoid and humerus component positions and prevents extreme positioning errors in RTSA.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.116-126
• /
• 2019

The purpose of this study is to objectify the shape of curvature and average change rate of angular and arched eyebrow makeup. The data for the analysis were the final 336 pieces for the cosmetology students in the whole country. SPSS 20.0 program was used for the collected data, frequency analysis, factor analysis, reliability analysis, and crossover analysis were performed. First, the frequency of the average change rate of eyebrow makeup (angular and arcuate) was analyzed. As a result, the eyebrows suitable for the angled type showed the highest level of 'A-2' and the arched eyebrows had the highest level of 'B-2'. Second, to analyze the important factors of eyebrow makeup, frequency of eyebrows was the most important, followed by the inclination of eyebrows and eyebrow tail. Third, factor analysis and reliability analysis were conducted to examine each dimension of eyebrow makeup perception, and it was derived from three factors including acceptability, aggressiveness, and playability. Fourth, in order to analyze the difference of important factors in the form of the standard eyebrow makeup, the cross - analysis was performed with chi - square test, and it was confirmed that the angular eyebrow makeup showed the most objectivity when the average change rate was 0.29 and the curvature was 0.67. Fifth, arcuate eyebrow makeup showed the most objectivity when the average change rate was 0.57 and curvature was 0.56. The results of this analysis can be used as objective data of aesthetic criteria when designing the eyebrow shape.

• 산경연구논집
• /
• 제12권2호
• /
• pp.29-40
• /
• 2021

Purpose: In this study, with the transaction amount of foreign direct Purchase and foreign direct sales increasing, South Korea is in a situation where foreign direct sales are focused on China. We looked at the impact of consumer innovation and site characteristics on repurchase ability among the characteristics of overseas direct purchase consumers as a way to make direct overseas sales to various overseas countries. Research design, data and methodology: Consumer innovativeness consists of four variables: functional, hedonistic, social, and cognitive, and the site characteristics consisted of four variables: product price, product assortment, convenience, and service. The study was conducted on consumers with foreign direct purchase experience, and was finally used in 252 additional analyses. Results: The main findings of this study were first, that the impact on the degree of re-purchase among consumer innovativeness of foreign direct purchase consumers had a significant impact in the order of cognitive innovativeness, hedonistic innovativeness, and functional innovativeness. Social innovativeness did not affect the degree of re-purchase. Second, site characteristics have been found to have a significant impact on the degree of re-purchase in order of product assortment, commodity price, and service. Convenience did not affect the degree of re-purchase. Conclusions Taken together these results can be called the biggest characteristic of the cognitive innovativeness of the consumer's inclination to use the overseas direct purchase, the price or quick response of the goods sold on the site is a factor that affects the re-purchase, above all it is important to have a variety of products. We will present this element as a way to make direct sales abroad to various countries. In addition, foreign direct purchase is a lot of transactions in China, the United States, EU, but the share of China is high in foreign direct sales, and the U.S. and EU have a very low performance, it is important to consider the reasons why they prefer Korean products in China to study the social and cultural characteristics of U.S. and European consumers in the future, and to support and active marketing that companies and sellers can increase sales.

• 터널과지하공간
• /
• 제31권6호
• /
• pp.460-468
• /
• 2021

TBM은 원형의 커터헤드를 회전하여 전단면으로 터널을 굴착하는 장비로 빠른 굴진속도와 안전한 시공이 장점이다. 건설현장에서 터널 굴착에 주로 사용되는 TBM은 정보통신기술의 적용이 용이한 장비로서 현재 무인화 및 자동화에 관련한 연구가 활발히 진행 중이다. 본 연구에서는 국외에서의 광물 및 에너지 자원 개발을 위한 TBM의 적용 사례를 살펴보고, 광물 및 에너지 자원 개발과 토목 건설현장에서 TBM 적용에 대한 차이를 살펴보았다. 그리고, TBM 선정 시에 기술적으로 고려해야 하는 지질조건, 심도, 현장 접근, 발진, 선형과 경사, TBM 크기 등을 알아보았다. 마지막으로 광산에서 TBM 적용 시의 장점과 단점 및 성공적인 광산 적용을 위하여 TBM이 기술적으로 갖추어야 하는 사항을 정리하였다.

• 지질공학
• /
• 제32권3호
• /
• pp.339-350
• /
• 2022

경주시 골굴사 신생대 응회암에서는 다양한 형태의 타포니가 다수 발달한다. 응회암은 풍화변질되어 있는데, 석영, 장석류, 운모, 버미큘라이트, 녹니석, 스멕타이트와 제올라이트 광물인 아날사이트 등으로 구성된다. 타포니는 초기 단계에서는 각력이 제거된 동공이나, 응회암 결정 입자의 풍화변질에 의해 형성된 미세 동공에서부터 시작하여 점차 확대된다. 타포니는 사면의 반대방향으로 약하게 경사지면서 발달한다. 타포니의 상관계수는 폭-높이 0.839, 폭-깊이 0.900, 높이-깊이 0.856인데 서로 밀접한 관련성이 있다. 타포니 벽체가 제거되면 반달형이나 신장된 타포니로 되는데, 작은 동공들이 횡적으로 병합되면서 확대된다. 커다란 타포니 동공들은 암반 사면에 비하여 내부가 비어있기 때문에 암반의 강도가 더 낮다. 따라서 타포니 사면의 강도, 동공의 비율, 체적, 합병 양상에 대한 지속적인 모니터링이 요구된다.