• 천문학회지
• /
• 제29권spc1호
• /
• pp.151-154
• /
• 1996

We examine the observations of large-scale magnetic fields in the Universe. We begin at the largest scale with clusters of galaxies and work our way down through galaxies and finally to the Milky Way. on which we concentrate in detail. We examine the observations of the Galactic magnetic field, and their interpretation, under the philosophy that the Galactic magnetic field is like that in other spiral galaxies. We use pulsar data. diffuse Galactic synchrotron emission, and starlight polarization data to discuss the Galaxy's global magnetic configuration and the uniform ($B_u$), random ($B_r$), and total ($B_t$) components of the field strength. We find disagreement among conclusions derived from the various data sets and argue that the pulsar data are not the best indicator for large-scale Galactic field. Near the Solar circle, we find that the azimuthal average of $B_t$ is 4.2$\mu$G and we adopt $B_u\~$2.2 and $B_r\~3.6{\mu}G$. $B_t$ is higher in spiral arms, reaching $\~5.9{\mu}G$. $B_t$ is higher for smaller $R_{Gal}$, reaching $\~8.0{\mu}G$ for $R_{Gal}$ = 4.0 kpc. The pattern of field lines is not concentric circles but spirals. The inclination of the magnetic spiral may be smaller than that of the Galaxy's spiral arms if our sample, which refers primarily to the interarm region near the Sun, is representative. However, it is not inconceivable that the local field lines follow the Galaxy's spiral pattern, as is observed in external galaxies.

• 천문학회보
• /
• 제37권1호
• /
• pp.59-59
• /
• 2012

Self-consistent mathematical model of the exotic object OTJ 071126+440405= CSS 081231:071126+440405 is discussed. The system was discovered as a polar at the New year night 31.12.2008/01.01.2009 by D.Denisenko (VSNET Circ), and we have initiated an international campaign of photometric and polarimetric observations of this object (totally -80 runs in Ukraine, Korea, Slovakia, Finland, USA) as a part of the "Inter-Longitude Astronomy" (ILA) project on monitoring of variable stars of different classes (Andronov et al., 2003). Here we present the geometrical and physical model of the system in the low luminosity state and in the intermediate luminosity state as well as in the high luminosity state. As the system is of -20 mag at minimum, no spectral observations were made to determine parameters of the red dwarf. From the statistical relationship, the mass of the red dwarf is estimated to be -0.165 solar masses, for the white dwarf (from eclipse duration) - from 0.5 to 1.76 solar masses. As the system resembles ER UMa in some characteristics, the lower value may be assumed. The inclination of the system and other physical parameters are estimated. The object is an excellent laboratory to study multiple physical processes in the magnetic systems.

• 복식
• /
• 제56권8호
• /
• pp.83-94
• /
• 2006

In this era of ubiquitous service, a computing device has functions similar with human beings. It influences all major fields of human life, such as clothing, dieting and housing. In order to use the coordination functions of the magic mirror, which might be a basic part of clothing in the era of ubiquitous service, this study concentrates on product information that should be inputted in RFID chip in detail in order to exercise virtual fashion coordination. Information should be inputted in RFID chip to use magic mirror for fashion coordination, a direction for doing this was also suggested. After coding the suggested clothing items, virtual fashion coordination was implemented as a fashion illustration. This study is as following, First, sorts standard code for suitable coordination in 4 images and presented to a proof. Code denoted by 10 characters. Each code literal special quality marks by two characters and divided by season, image, fabric, item, rotor, five items. Item middle of characters of 10 code, when agree on article more than 8, coordination is enabled. Secondely, It is presented by coordination to dressing action picture by suitable coordination classified apart in whole occasions, and coordination method by wearer inclination is remembered wearer's dressing action picture to Magic mirror including layered look. Thirdly, wardrobe of Magic mirror clothes that always buy newly in magic mirror, is washing and clothes that do not take to wardrobe did to be controlled. Fourth, Wealth and schedule is suggested firster than wearer's dressing action.

• 한국지역사회생활과학회지
• /
• 제22권1호
• /
• pp.77-94
• /
• 2011

It is not clear to assume the history of dyeing by persimmon juice without an early knowledge of an accurate record. However, the beginning of persimmon dyeing in Korea is estimated to be around the $13^th$-$14^th$ century, even though there are no supporting records. On the other hand, there are definite records of persimmon dyeing in Japan from around the 17th century. Persimmon juice was originally used for fishing tools in both Korea and Japan, but upon entering the Modern Era it eventually transfigured into a dye for fabric. In Korea, persimmon-dyed fabrics were used for traditional clothing until it also became a popular choice for modern clothes in the 1990s. In Japan, persimmon juice was originally used for varnishing surfaces of household items, but it recently became a material for arts, crafts, and even apparels. The main difference between persimmon dyeing of the two countries is the presence and absence of the fermentation process. In Korea, persimmons are picked and water is immediately added to its juice to produce the dye. In contrast, Japan produces a fermented persimmon dye. As a result, in Korea the dye can not be preserved for long periods, whilst in Japan it is matured in the storage for 2-3 years. Today's pursuit of eco-friendliness and wellness has prompted an inclination towards natural material clothes. Therefore, it is necessary for both countries to push scientific research into improving the storage methods and colorfastness of persimmon-dyed products for the increase of use consumption in other areas of persimmon and arrowroot dyed fabrics, and the development of environment friendly materials.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3048-3057
• /
• 1996

Analysis model containing two inclined surface cracks on semi-infinite elastic body is established and analyzed on the basis of linear fracture mechanics to examine mutual interference of two surface cracks. Muskhelishvili's complex stress functions are introduced and a set of singular integral equations is obtained for a dislocation density function. The stress intensity factors at crack tip are obtained by using the Gerasoulis'method. When two surface cracks are parallel and have the same length, the values of $K_1$and $\Delta K_11$(variation of $K_11$) for crack 1 and crack 2 decrease by the mutual interference of two surface cracks as the distance between the two surface cracks shortens. The effect of mutual interference is remarkable in high friction coefficient. In case that two surface cracks are parallel, the values of $K_1$and $\Delta K_11$for crack 2 decrease as the length ratio ot crack 2 to crack 1 becomes small. As the crack inclination angle rises, the value of $K_1$ and the mutual interference of $K_1$for crack 2 increase and the value of$\Delta K_11$ for crack 1 becomes smaller than that for crack 2.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1317-1323
• /
• 2002

This paper describes the comparison of calculated effective stress with experimental one in austenitic heat resistant steels, STS310J1TB and STS310S with and without a small amount of Nb and N. Based on a solute atoms diffusion model, contribution from soluble nitrogen to the high-temperature strength was numerically examined for austenitic heat-resisting Fe-Cr-Ni-N(STS310J1TB) and Fe-Cr-Ni (STS310S) alloys. The solute atmosphere dragging stress of dislocation was calculated in optional dislocation velocity of STS310J1TB and STS310S at $650^{\circ}C$, $675^{\circ}C$ and $700^{\circ}C$. As a result of the numerical calculation, the solute atmosphere dragging stress of STS310J1TB was about 50 times larger than that of STS310S. When the temperature became high, the maximum value of solute atmosphere dragging stress was small and the velocity of moving dislocation was fast. From the relationship between the dislocation rate and the solute atmosphere dragging stress, the relation of both was proportional and the inclination is about 1 in the level with low velocity of moving dislocation. From above results, the mechanism of dislocation movement in STS310J1TB was the solute atmosphere dragging stress. The solute atmosphere dragging stress, which was calculated from the numerical calculation was close to the effect stress in stress relaxation tests.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.551-554
• /
• 2001

A necessity of remote control robots or various searching robots etc. that accomplish works given instead of human under long distance and extreme environment such as volcano, universe, deep-sea exploration and nuclear power plant etc. is increasing, and so the development and the research regarding these mobile robots are actively progressing. The wheel mobile robot or the track mobile robot have a sufficient energy efficiency under this en, but also have a lot of limits to accomplish works given which are caused from the restriction of mobile ability. Therefore, recently many researches for the walking robot with superior mobility and energy efficiency on the terrain, which is uneven or where obstacles, inclination and stairways exist, have been doing. The research for these walking robots is separated into fields of mechanism and control system, gait research, circumference environment and system condition recognition etc. greatly. It is a research field that the gait research among these is the centralist in actual implementation of walking robot unlike different mobile robots. A research field for gait of walking robot is classified into two parts according to the nature of the stability and the walking speed, static gait or dynamic gait. While the speed of a static gait is lower than that of a dynamic gait, a static gait which moves the robot to maintain a static stability guarantees a superior stability relatively. A dynamic gait, which make the robot walk controlling the instability caused by the gravity during the two leg supporting period and so maintaining the stability of the robot body spontaneously, is suitable for high speed walking but has a relatively low stability and a difficulty in implementation compared with a static gait. The quadruped walking robot has a strong point that can embody these gaits together. In this research, we will develope an autonomous quadruped robot with an asaptibility to the environment by selectry appropriate gait, element such as duty factor, stride, trajectory, etc.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1485-1495
• /
• 1997

The present study investigates heat/mass transfer around film cooling jets and circular cylinders to compare the characteristics of each other. Experiments are conducted to obtain the detailed heat/mass transfer coefficients of flat plate with injections through an array of holes and for flows around an array of protruding circular cylinders using the naphthalene sublimation technique. The inclination angles of cylinders are set to the same ones of jets; a, the angle between the jet and the surface is fixed at 30 deg. through the whole experiments and .betha., the angle between the projection of the jet on the surface and the direction of main stream is adjusted to 0 deg., 45 deg. and 90 deg. to investigate the effect of variation of injection angles. The influence of blowing rates of jets and those of cylinder length to diameter ratios are also investigated. The results indicate that the increase of angle .betha. influences the spanwise uniformity of heat/mass transfer remarkably for both jets and cylinders, but that variation of cylinder length to diameter ratios has weaker effects on heat/mass transfer coefficients than that of blowing rates.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.21-30
• /
• 2006

도심지 터널은 미고결성 저토피고 지반에 건설되는 경우가 많기 때문에 지반변위가 터널 설계를 지배하며 설계는 기존의 탄성 및 탄소성 모델을 활용한 수치해석적인 방법에 크게 의존하고 있기 때문에 현장의 계측결과에 부합하는 지반 거동을 묘사하키에는 부족한 점이 많다. 미고결성 저토피고 지반에 대한 터널 굴착시 지반 거동, 붕괴 매카니즘 및 침하량 예측에 관해 연구하였고 변형율 연회를 고려한 비선형 해석을 실시하여 기존의 탄성 및 탄소성 모델과 비교하였다. 도시 NATM 터널의 지반거통을 파악한 결과 미고결성 저토피고 지반의 경우 변형율 연화모델을 적용하는 것이 지표면 침하 기울기가 급해지거나 전단대가 발생하는 등 실제의 지반거동을 현실적으로 모델링 할 수 있었다.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.3-18
• /
• 1996

The aim of this study is to clarify the style of fashion design which represented three types of erotic mood. And it will have its significance in finding out some standards which call be applied to practical designing. The positive analysis on this study is composed of two parts-the analysis of fashion journals and of questionaire. Analysis of fashion design is to seize and to compare frequence of 17 style of fashion design in the delivery of erotic mood in $\ulcorner$Mot$\lrcorner$ and $\ulcorner$Vogue$\lrcorner$. The questionaire is to investigate preference and inclination of perception in erotic mood of 17 style of fashion design by sex and age. The results were as follows: 1) In $\ulcorner$Vogue$\lrcorner$ than in $\ulcorner$Mot$\lrcorner$ erotic style ate actively made use of. 2) To suggest style of fashion design expressed 3 moods of erotic can be applied to practical designing is as follows. Expression of 'romantic & mysterious' mood is desirab]e exposed body line in motion style in male, twenties and thirties. Expression of 'seductive h stimulating' mood is desirable bosom exposure, leg exposure, adhere of bosom, adhere of waist, seen-through leg, slit, exposed body line in motion style in male and twenties and seen-through bosom, adhere of hip, slash style in male. This mood is desirable exposed body line motion style in thirties and forties. Expression of 'sensuous & attractive' mood is desirable bosom exposure, leg exposure, adhere of bosom, adhere of waist, seen-through leg, slit, exposed body line in motion style in male and twenties and adhere of hip, seen-through bosom, slash style ill male. And this mood is desirable adhere of waist, arm exposure style in female and adhere of waist, exposed body line in motif style in thirties and forties.