• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 1999년도 Japanese Journal of Medical Physics
• /
• pp.403-406
• /
• 1999

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2003년도 제27회 추계학술대회
• /
• pp.44-44
• /
• 2003

As a basic measurement tool in the areas of animal models of human disease, gene expression and therapy, and drug discovery and development, small animal PET imaging is being used increasingly. An ideal small animal PET should have high sensitivity and high and uniform resolution across the field of view to achieve high image quality. However, the combination of long narrow pixellated crystal array and small ring diameter of small animal PET leads to the degradation of spatial resolution for the source located at off center. This degradation of resolution can be improved by determining the depth of interaction (DOI) in the crystal and by taking into account the information in sorting the coincident events. Among a number of 001 identification schemes, dual layer phsowich detector has been widely investigated by many research groups due to its practicability and effectiveness on extracting DOI information. However, the effects of each crystal length composing dual layer phoswich detector on DOI measurements and image qualities were not fully characterized. In order to minimize the DOI effect, the length of each layer of phoswich detector should be optimized. The aim of this study was to perform simulations using a simulation tool, GATE to design the optimum lengths of crystals composing a dual layer phoswich detector. The simulated small PET system employed LSO front layer LuYAP back layer phoswich detector modules and the module consisted of 8${\times}$8 arrays of dual layer crystals with 2 mm ${\times}$ 2 mm sensitive area coupled to a Hamamatsu R7600 00 M64 PSPMT. Sensitivities and variation of radial resolutions were simulated by varying the length of LSO front layer from 0 to 10 mm while the total length (LSO + LuYAP) was fixed to 20 mm for 10 cm diameter ring scanner. The radial resolution uniformity was markedly improved by using DOI information. There existed the optimal lengths of crystal layers to minimize the variation of radial resolutions. In 10 cm ring scanner configuration, the radial resolution was kept below 3.4 mm over 8 cm FOV while the sensitivity was higher than 7.4% for LSO 5 mm : LuYAP 15 mm phoswich detector. In this study, the optimal length of dual layer phoswich detector was derived to achieve high and uniform radial resolution.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.294-298
• /
• 1997

In the magnetic resonance imaging, the fast spin echo imaging technique is a widely used clinical imaging method, since its scanning time is much shorter than the conventional spin echo imaging and it gives the almost same image quality. However, the fast spin echo technique has two times longer imaging time or the dual echo acquisition which can obtain a spin density image and a $T_2$-weighted image simultaneously. To overcome such a drawback, this paper proposes a new fast dual echo imaging technique which can give the same quality images at the single echo imaging time. The proposed technique reduces the imaging time by overlapping most of echo train data for each image reconstruction. In order to verify its validity and usability the human head experimental results which were obtained at the 0.3T permanent MRI system are presented.

• 대한의용생체공학회:의공학회지
• /
• 제39권3호
• /
• pp.134-139
• /
• 2018

One of the most common problems with pedicle screw system is pullout of the screw. This study was performed to evaluate the pullout strength and driving torque of newly designed pedicle screws. The design of three type screws were standard pedicle screw, which had single lead threaded and single pitched design (Type A), single pitched and dual lead threaded pedicle screw (Type B), dual pitched and dual lead threaded pedicle screw (Type C), respectively. The tests were performed in accordance with the ASTM standards using polyurethane (PU) foam blocks. There was no significant difference in pullout strength among three types of screw. Type B and Type C exhibited higher insertion torque and removal torque than Type A, respectively (p<0.05). Pedicle screws newly developed with dual pitched and dual lead threaded design showed higher driving torque without decrease in pullout strength compared to the standard pedicle screw and could be inserted more rapidly with the same number of revolutions.

• Molecules and Cells
• /
• 제27권3호
• /
• pp.313-319
• /
• 2009

The dual-vector system-II (DVS-II), which allows efficient display of Fab antibodies on phage, has been reported previously, but its practical applicability in a phage-displayed antibody library has not been verified. To resolve this issue, we created two small combinatorial human Fab antibody libraries using the DVS-II, and isolation of target-specific antibodies was attempted. Biopanning of one antibody library, termed DVFAB-1L library, which has a $1.3{\times}10^7$ combinatorial antibody complexity, against fluorescein-BSA resulted in successful isolation of human Fab clones specific for the antigen despite the presence of only a single light chain in the library. By using the unique feature of the DVS-II, an antibody library of a larger size, named DVFAB-131L, which has a $1.5{\times}10^9$ combinatorial antibody complexity, was also generated in a rapid manner by combining $1.3{\times}10^7$ heavy chains and 131 light chains and more diverse anti-fluorescein-BSA Fab antibody clones were successfully obtained. Our results demonstrate that the DVS-II can be applied readily in creating phage-displayed antibody libraries with much less effort, and target-specific antibody clones can be isolated reliably via light chain promiscuity of antibody molecules.

• 대한의용생체공학회:의공학회지
• /
• 제43권2호
• /
• pp.71-80
• /
• 2022

The interaction between dual-ligand decorated particle-based delivery system and target cell under shear flow is predicted using probability model developed. We assumed the two kinds of ligand are decorated on the surface of the particle with 10% length difference. Fixed with other biophysical parameters, a study on the particle-cell interaction for the different non-specific interaction parameter is performed. To induce the firm adhesion, short ligand-receptor should be engaged. Also, it is shown that the rational design of ligand-receptor interaction, including receptor number, specific interaction parameter, kinds of ligand-receptor, etc., should be considered.

• 대한의용생체공학회:의공학회지
• /
• 제19권1호
• /
• pp.91-100
• /
• 1998

자기 공명 영상에서 최근에 개발된 fast spin echo 영상법은 종래에 사용되었던 spin echo 영상법과 거의 같은 화질과 contrast를 제공하면서도 8-16배 이상 촬영 시간이 단축되어 임상적으로 많이 사용되는 촬영 방법 중의 하나로 자리 잡았다. 그러나 종래의 spin echo영상법과는 달리, 동시에 spin밀도 영상과T 강조 영상을 제공하는 dual echo 영상법은 fast spin echo의 경우, 촬영 시간이 2배로 늘어나기 때문에 그 중요한 장점을 잃어 버리게 되었다. 본 논문에서는 dual echo를 동시에 얻기 위한 현재의 fast spin echo 영상법의 이와 같은 단점을 해결하는 새로운 영상법을 제안한다. 새로운 영상법은 기존의 fast spin echo와 거의 같은 화질을 제공하면서도 dual echo 영상을 얻는데 추가 촬영 시간을 요구하지 않는다. 이를 입증하기 위하여 인체 실험을 수행하였고 그 결과를 기존의 방법으로 얻은 영상과 비교함으로써 그 유용성을 보인다.

• 대한의용생체공학회:의공학회지
• /
• 제10권3호
• /
• pp.293-302
• /
• 1989

A Dual Sensor Wiener Filter technique was used to improve the image quality of the scanning type digital radiographic system (resolution and SNR). In this method, two images were acquried simultaneously using two sensors with high and low resolution and SNR values. Using the cross Power spectrum between dual sensor outputs of the same chest radiographic image. we design a new type of Wiener Filter and implement it with fast algorithm. We compared the performance of this new dual sensor filter with conventional single sensor filters (Wiener Filter and Parametric Projec- tion Filter) . In simulation studies, it is shown that this new method has SNR improvement of 1-3 dB better than conventional filters.

• 대한핵의학회지
• /
• 제33권3호
• /
• pp.282-288
• /
• 1999

목적: 골밀도는 DXA 기종에 따라 그 측정치의 차이가 발생하는 것으로 알려져 있어 현재 널리 사용중인 Lunar EXPERT-XL과 Hologic QDR 4500-A에서 측정된 골밀도의 차이를 비교하고 그 차이를 보정할 수 있는 교차보정식을 구하고자 하였다. 대상 및 방법: 109명의 여성(평균 나이; $55{\pm}11$년)을 대상으로, 같은 날 대상 환자의 제2-4 요추와 대퇴골 경부를 Lunar EXPERT-XL과 Hologic QDR 4500-A로 각각 촬영하여 얻어진 측정 영역(area)과 골무기질양(BMC), 골밀도(BMD)와 정상 골밀도 참고치에 대한 백분율의 차이를 분석하였다. 또한 측정영역, 골무기질양, 골밀도와 정상 골밀도 참고치에 대한 백분율에 대해 각각 선형 회귀 분석으로 교차 보정식(cross-calibration equation)과 상관 계수(R), 표준 예측 오차(SEE)를 구하였다. 결과: Lunar 기종으로 측정한 제2-4 요추와 대퇴골경부의 골밀도(각각 평균 $0.955{\pm}0.17g/cm^2$, $0.767{\pm}0.131g/cm^2$)가 Hologic 기종으로 측정한 값보다(각각 $0.851{\pm}0.144g/cm^2$, $0.649{\pm}0.108g/cm^2$) 각각 평균 13%와 19% 높았다. 골무기질양과 정상 골밀도 참고치에 대한 백분율도 Lunar 기종에서 모두 유의하게 높았으나(p<0.001), 측정영역은 두 기종간의 차이가 없었다(p>0.05), 두 기종간 골밀도는 높은 상관관계(r>0.95)를 보였고 교차 보정식은 제2-4 요추에서 Lunar=1.1297${\times}$Hologic-0.0027, 대퇴골 경부에서 Lunar=1.1556${\times}$Hologic+0.0182 이었다. 결론 두 DXA 기종간의 골밀도 측정치는 서로 차이가 있었으나 높은 상관 관계를 보여 교차 보정식을 얻을 수 있었다. 이 교차 보정식은 환자의 추적 검사상 불가피하게 다른 기종으로 검사를 받은 경우나 하나의 기종으로 검사를 받은 연구 집단의 결과를 다른 기종으로 검사한 연구 집단의 결과와 비교 분석시 유용하리라 생각한다.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.165-171
• /
• 2021

Purpose: This study aimed to evaluate the effect of collimator width on effective atomic number (EAN), relative electron density (RED), and stopping power ratio (SPR) measured by dual-layer dual-energy computed tomography (DL-DECT). Methods: CIRS electron density calibration phantoms with two different arrangements of material plugs were scanned by DL-DECT with two different collimator widths. The first phantom included two dense bone plugs, while the second excluded dense bone plugs. The collimator widths selected were 64 mm×0.625 mm for wider collimators and 16 mm×0.625 mm for narrow collimators. The scanning parameters were 120 kVp, 0.33 second gantry rotation, 3 mm slice thickness, B reconstruction filter, and spectral level 4. An image analysis portal system provided by a computed tomography (CT) manufacturer was used to derive the EAN and RED of the phantoms from the combination of low energy and high energy CT images. The EAN and RED were compared between the images scanned using the two different collimation widths. Results: The CT images with the wider collimation width generated more severe artifacts, particularly with high-density material (i.e., dense bone). RED and EAN for tissues (excluding lung and bones) with the wider collimation width showed significant relative differences compared to the theoretical value (4.5% for RED and 20.6% for EAN), while those with the narrow collimation width were closer to the theoretical value of each material (2.2% for EAN and 2.3% for RED). Scanning with narrow collimation width increased the accuracy of SPR estimation even with high-density bone plugs in the phantom. Conclusions: The effect of CT collimation width on EAN, RED, and SPR measured by DL-DECT was evaluated. In order to improve the accuracy of the measured EAN, RED, and SPR by DL-DECT, CT scanning should be performed using narrow collimation widths.