• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2284-2293
• /
• 2004

The evaporation heat transfer coefficient h$\_$r/ and frictional pressure drop Δp$\_$f/ of refrigerant R-134a flowing in the oblong shell and plate heat exchanger were investigated experimentally in this study. Four vertical counterflow channels were formed in the oblong shell and plate heat exchanger by four plates of geometry with a corrugated sinusoid shape of a 45 chevron angle. Upflow of refrigerant R-134a boils in two channels receiving heat from downflow of hot water in other channels. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality of R-134a were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the evaporation heat transfer coefficient h$\_$r/ and pressure drop Δp$\_$f/ increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the h$\_$r/ and Δp$\_$f/. But the effect of the average heat flux does not show significant effect on the h$\_$r/ and Δp$\_$f/. Finally, at a higher saturation temperature, both the h$\_$r/ and Δp$\_$f/ are found to be lower. The empirical correlations are also provided for the measured heat transfer coefficient and pressure drop in terms of the Nusselt number and friction factor.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.149-156
• /
• 2016

저장조에 위치한 사용후핵연료는 가혹한 원자로 조건에 의해 구조적 건전성이 와해되므로 외력에 취약하다. 따라서 운반 및 취급 중 사고 상황이 고려되어야 한다. 극단적인 경우, 핵연료 취급 중 사고로 인해 핵연료 저장조에서 핵연료집합체 낙하가 발생할 수 있다. 이러한 사고 상황 하에서 연료봉 파손 등을 평가하기 위해서 수조에 충돌할 때 발생하는 충돌력을 분석할 필요가 있다. 이는 핵연료가 수조 바닥에 충돌할 때의 속도를 입력으로 하여 평가될 수 있다. 연료봉이 핵연료 중량 및 부피의 대부분을 차지하고 있으므로, 연료봉 다발은 수중 항력을 예측하는데 중요한 역할을 한다고 볼 수 있다. 본 연구에서는 $3{\times}3$ 의 짧은 연료봉 다발을 모델로 사용하여 수중에서 낙하할 때 받는 수력을 계산하였고, 이를 전산모사와의 비교를 통하여 검증하였다. 본 방법론을 사용후핵연료 건전성 평가에 적용할 수 있을 것으로 기대된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.512-516
• /
• 2005

홈 네트워크란 일반적으로 PC를 비롯한 가정 내의 가전기기들이 하나의 네트워크로 통합되어 통신이 가능하도록 하는 것을 의미한다. 21세기에 들어서 홈 네트워크 환경을 위한 여러 가지 기술들이 제시되었다. 대표적으로 HomePNA, IEEE1394, ethernet lan, 블루투스 등이 있다. 일반적으로 홈 네트워크를 구현하는데 있어 가전기기간 데이터를 전송 할 경우 표준 직렬 인터페이스인 RS232를 이용한다. 그러나 RS232를 이용하여 홈 네트워크를 구현할 경우 다음과 같은 문제점이 있다. 즉, point-to-point 방식을 사용하여 각각의 기기를 모두 RS232로 연결해야 한다는 것이다. 이를 경우 기기의 숫자만큼 회선이 늘어남으로 인해 시스템 자체가 복잡해지고 비용도 증가한다. 이러한 문제점을 개선하고자 이 논문에서는 RS422 Multi-drop mode 시리얼 통신을 이용하여 홈 네트워크를 설계하였고 임베디드 리눅스 시스템으로 제어하였다. 그리고 홈 네트워크 가상환경을 구현하기 위해서 PIC를 이용하여 모터 및 센서를 RS422와 연결하였다.

• 터널과지하공간
• /
• 제20권5호
• /
• pp.360-368
• /
• 2010

이 논문은 발파석의 비산과 낙하를 조절하여 파쇄석이 사면의 낮은 쪽 소단에 분산될 수 있도록 한 노천발파에 대한 사례연구이다. 비산이 횡적인 분산과 파쇄석 더미의 이완을 초래하는 동안 낙하는 굴착기에 의한 굴착이 용이하도록 파쇄석 더미의 높이를 낮춰주는 역할을 한다. 이런 면에서 이 논문에서는 몇몇 발파설계 변수들을 조정하는데 주안점을 두었다. 대상 사면은 사암 벤치로서 벤치의 평균 높이는 22~24 m이다. 이 사면은 굴착심도가 14 m인 10 $m^3$ 용량의 로우프 쇼벨 작업이 가능하도록 조성되었다. 비산과 낙하를 조절한 새로운 발파설계 결과를 이 현장에서 적용되고 있던 상단(10~14 m)과 하단(12~15 m)의 이단식 발파 결과와 비교하였다. 파쇄석의 입도와 그 분포 및 쇼벨의 굴착 싸이클 시간들을 비교하였다.

• 대한수사과학회지
• /
• 제1권1호
• /
• pp.88-91
• /
• 2006

• Journal of Chest Surgery
• /
• 제16권2호
• /
• pp.260-263
• /
• 1983

We studied and managed successfully a case of cervical dysphagia, 72 years old male patient. Cervical dysphagia is a relatively uncommon disease and encounters most commonly after the age of sixty in equal sex distribution. The final diagnosis can be made by esophagography and esophagomanometry. We performed cricopharyngeal myotomy of Belsey method with excellent result. After operation patient showed no more dysphagia, normal esophagogram and pressure drop in esophagomanometry.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.58-65
• /
• 2011

The specific objective of this study was to develop an IRDS (integrated receiver drier subcooling) condenser model for use in a mobile air-conditioning system. A three-zone model based on the desuperheating, two-phase, and subcooling sections of a condenser could be used to estimate the performance with a good accuracy. Overall heat transfer coefficients for each of the three sections, expressed as a function of the air velocity across the condenser and refrigerant mass flow rate and the model using the elemental difference method incorporate calculations to determine the pressure drop, heat performance within the condenser and it includes physical parameters (pass, tube hole size and length) that can be varied to analyze potential design changes without exhaustive experimental efforts. it was found that an accuracy of heat performance was within 5% in case of using the various condensers, the refrigerant pressure drop was predicted within 25% and the pressure drop of air side was well matched with experiment data within 4%.

• 전력전자학회논문지
• /
• 제21권5호
• /
• pp.453-456
• /
• 2016

The major causes of electrical fire in low-voltage distribution lines are classified into short-circuit fault, overload fault, electric leakage, and electric contact failure. The special principal factor of the fire is electric arc or spark accompanied with such electric faults. This paper studies the development of an electric fire prevention system with detection and alarm of that in case of parallel arc fault occurrence in low-voltage distribution lines. The proposed system is designed on algorithm sensing the instantaneous voltage drop of line voltage at arc fault occurrence. The proposed detector has characteristics of high-speed operation responsibility and superior system reliability from composition using a large number of semiconductor devices. A new sensing control method that shows the detection of parallel arc fault is sensed to ripple voltage drop through a diode bridge full-wave rectifier at electrical accident occurrence. Some experimental tests of the proposed system also confirm the practicality and validity of the analytical results.

• The Korean Journal of Pain
• /
• 제29권1호
• /
• pp.57-61
• /
• 2016

Foraminal or extraforaminal Far Lateral Disc Herniations (FLDH) extending into or beyond the foraminal zone have been recognized as between 7-12% of all lumbosacral disc herniations. Conventional posterior laminectomy may not provide good access to a herniation that lies far lateral to the lateral margin of the pedicle. Use of the endoscopic technique through a percutaneous approach to treat such FLDH patients can decrease the surgical morbidity while achieving better outcomes. We made an effort to utilize the advantages of percutaneous endoscopic lumbar discectomy (PELD) and to determine the appropriate approach for FLDH at the level between the 5th Lumbar and first Sacral vertebrae(L5-S1). The authors present a case of an endoscopically resected lumbar extruded disc of the left extraforaminal zone with superior foraminal migration at the level of L5-S1, which had led to foot drop, while placing the endoscope in the anterior epidural space without facetectomy.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1007-1012
• /
• 2016

Induction motors are used widely in driving load of a fluid, such as a pump or a fan in the industry. Induction motor has been generated the voltage drop by the occurrence of a high current during startup. In addition, high start-up current can act as a mechanical stress on the shaft of the motor. So there is need a way to reduce the starting current. Soft start method is one of the many ways to reduce the starting current. This method uses silicon-controlled rectifiers(SCRs) for varying value of the voltage applied to the motor. There is a case for fixing or changing the thyristor firing angle to adjust the magnitude of the voltage. Starting power factor of induction motor is very low compared to the normal operation. Soft starting with the firing angle fixed needs to be considered a low power factor at startup. In this study, we compared the direct start characteristics and soft start characteristics considering the low power factor at the time of start-up. It was possible to confirm that the starting current and the voltage drop is present differently according to the firing angle.