• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.169-175
• /
• 2015

This study aims to improve the dynamic stiffness of an inspection robot frame to prevent derailment from transmission lines. Finite element models for the transmission lines and robot frame are developed for the multi-body dynamic simulation. Natural frequency analysis was conducted using the FE models. Three types of spacer damper clamps installed on 4-conductor transmission lines are used to evaluate the derailment of the robot. Multi-body dynamic simulations with FE models are demonstrated for sub-span oscillation. When the robot operates, derailment of inspection robot from the transmission lines is determined because of resonance. To prevent the resonance, body position was changed and thickness optimization was conducted. The results show that derailment was not occurred because of the natural frequency improvement.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1794-1804
• /
• 1993

The thermal stress intensity factors for interface cracks of Griffith and symmetric lip cusp types under vertical uniform heat flow in a finite body are calculated by boundary element method. The boundary conditions on the crack surfaces are insulated or fixed to constant temperature. The relationship between the stress intensity factors and the displacements on the nodal point of a crack tip element is derived. The numerical values of the thermal stress intensity factors for interface Griffith crack in an infinite body and for symmetric lip cusp crack in a finite and homogeneous body are compared with the previous solutions. The thermal stress intensity factors for symmetric lip cusp interface crack in a finite body are calculated with respect to various effective crack lengths, configuration parameters, material property ratios and the thermal boundary conditions on the crack surfaces. Under the same outer boundary conditions, there are no appreciable differences in the distribution of thermal stress intensity factors with respect to each material properties. But the effect of crack surface thermal boundary conditions on the thermal stress intensity factors is considerable.

• 한국의류학회지
• /
• 제21권8호
• /
• pp.1275-1286
• /
• 1997

The purpose of this study is to investigate how the shape of the lower body influences an individuals' ease in fitting skirts. Subjects in this study consisted of 188 adult females categorized into two groups(the first group were subjects 18∼33 years of age and the second group 34∼59 years of age), whose measurements were taken and then compared between the two groups. The subjects were also categorized into 5 different lower body types. The following are the results; (1) The comparative analysis of the ease from the two a9e groups showed a bigger value of waist girth in the young age group. And thereverse results were found when measuring hip firth. (2) The correlation analysis between the ease and the anthropometric data showed a weak statistical correlation in the older group, and showed no statistical correlation in the younger group. However, there was correlation between the ease and the body measurements as well as between the differences of waist girth and hip girth. (3) The most appropriate average ease of skirt in the young age group was 1.03 cm for waist and 5.71 cm for hip; the most appropriate average ease of skirt in the older age group was -0.76 cm at the waist and 4.10 cm at the hip. (4) Analysis of variance with a special emphasis on the ease of waist girth and hip girth according to the anthropometric data of the lower body revealed a statistically significant correlation.

• 한국의류학회지
• /
• 제27권1호
• /
• pp.143-153
• /
• 2003

This study was conducted in order to provide basic study material for children's garment design. The subjects of this study are fifth and sixth grade elementary school girls, who demonstrate rapid growth and the differences among individual somatic types are apparent. Their bodies are studied, categorized into patterns and the characteristics are examined. 1 The increase of height and length measurements according to age increase are much larger than that of breadth, depth and girth menasurments. 2. Eight factors are drawn upon factor analysis and the rate of factors comprisedare 78.68%. 3. The shapes of lower body of higher grades girls in elementary school are classified into three categories. The first type is slender in lower body and the second type is more contoured around waist area with longer length and higher height than the average elementary school girls. The third type is heavy in the lower body. 4. Eighteen items important for somatic categorization are selected through stepwise discriminant analysis and the exactitude rate of these items is 93.3%.

• 대한가정학회지
• /
• 제30권3호
• /
• pp.63-77
• /
• 1992

The purpose of this study is to improve clothing construction by analyzing form variation of upper trunk & upper arms with the use of plaster cast. Experimental research was performed by plaster gypsum method. The subjects were males between age 21 and 25, classified Standard somatotype by their bust size and Rorher Index. Arm movements were consisted of 5 types(0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$, 180$^{\circ}$) to each vertical motion in front. The statistical analyses used in this study were mean, standard deviation, repeated mesure design. The result obtained from this study were as follows; 1. As a result of investigating into the rate of the expantion and contraction of basic body-surfact-lines, the side seam length showed the maxium rate of expantion in 180$^{\circ}$ degrees, the shoulder length showed the maxium contraction in the same degrees. 2. The variation of the upper part of the body form by increasing the upper limb motions, shoulder point was moved to be the inside or upside. And the anterior armfit point, posterior armfit point and armfit point were moved to upside. The form of the armhole-line in Drafts of a body surface was differently changed by increasing the movements. 3. Increasing the upper limb motions, the height of sleeve cap decresed and width of the sleeve decreased but girths of the sleeve cap was not show consistant change.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.13-23
• /
• 1995

The purpose of this study is to inquire about the effects of individual tray design and impression method on the border extension and contour of denture. 10 students at the dentistry college who have normal occlusion and symmetric facial form and normal facial muscle activity were selected. The tray was designed three types (large, medium, small tray). After border molding was done by dentist and operator, final impression was taken. The length of impression body and width of border were measured by a vernier caliper on the cast. The obtained results were as follows : 1. As the tray border was shortened, the length of impression body and width of border was short (P<0.01). 2. When the impression was taken with the small tray, the length of impression body was short in passive border molding than active border molding. 3. When the medium tray was used, the width of impression body was short in passive border molding than active border molding.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.862-867
• /
• 2016

In this study, the embroidery textile conductive wire of conductive yarn was designed into the wearable integrated clothing for sensing the infant's body temperature. To develop a high quality of the stable fiber-based textile conductive wire, firstly the five types of conductive yarns were twisted or covering polyester yarns and the coated conductive fiber with silver(Ag) or iron(Fe). As a result of comparative conductivity in conductive yarns of yarn processing, the 250 denier of conductive yarns with $0.74{\Omega}$/1~5cm were proposed and used for the integrated embroidery textile conductive wire for sensing. During experiments using the proposed embroidery textile conductive wire, measured resistance of thermistor according to the body temperature was correctly delivered to amplifier module, and showed feasible reliability of temperature sensing. As a wearable application, conductive yarns which takes forms of embroidery textile conductive wire would seems to be reliable as a conductive wire and could be replaced by the conductive metal wires.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.470-480
• /
• 2015

There are many challenges in manufacturing system for new factory construction. Although factories produce same product, the layout of each factory may be different. The body shop in an automotive factory is a typical flow line with assembly, but the layout concept of the line varies among factories. In this paper, two types of layouts in the body shops of automotive factories, one for layered build and the other for modular build, are compared using simulation study. The simulation experiments indicate that the modular build layout is better than the layered build layout with respect to production rate. The effects of various failure distributions on the throughputs are also investigated, and some insights are suggested regarding the layout concept.

• 한국의류학회지
• /
• 제38권1호
• /
• pp.123-135
• /
• 2014

This study classifies types of fashion victims and identifies an internal value system that works for their fashion selection. This study reviewed the definition of 'fashion victim' by tracing similar terms such as fashion terrorist, fashion loser, and worst dresser. We classified fashion styles of fashion victims into four types based on an analysis of articles that pertained to Korean celebrities' fashion and image data. The first type is the fashion style of those who dress without any consideration of body shape. The second type is the style for those who have little consideration in regards to personal image. The third type is the style of those who choose a fashion with excessive decoration. The fourth type is the style for those who use too many fashion items at the same time. Based on a consistent analysis of fashion styles, this study identified the internal value system believed to be working in fashion victims' fashion selection. This study presents three internal value system characteristics. The first is the fetishism that is revealed when fashion victims wear expensive clothes or fashion items that are believed to reveal their personal identity and social status. The second is the blindness which becomes apparent when they follow a fashion in vogue indiscriminately without considering a personal image or body shape. The third is an excessiveness shown when individuals select clothes with too many beads or feathers that are decorative and rich in volume.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2194-2210
• /
• 2018

In the era of big data, consumers capture more and more economic surplus yet the seed of distrust also grows with the fast-spreading of social commerce, this paper began with the idea that product types may determine the degree of consumers' distrust even when identical discounts are offered for those products on Chinese social commerce websites. We also attempted to determine if distrust negatively affected consumers' purchase attitudes. 20 representative products that are commonly sold on social commerce websites in China were chosen to examine the relationships among product types, discount rates, distrust levels, and purchase attitudes. Inductive interview was used to collect the data as well as consumers' perceptions of the relationships. Data analysis results suggested that consumers like deep discounts, but their distrust levels increase along with the discount rates, however, the levels of increasing distrust vary according to product types. High, medium, and low discount rate categorizations were made and three propositions were suggested. This paper will contribute to the body of knowledge on online social commerce market and provide valuable implications for e-retailers and general consumers in online social commerce websites in China.