Objectives: Acute methanol poisonings known to be typical occupational diseases occurring in developing countries broke out in sub-contract manufacturers in the early 2016. The present paper attempted to identify underlying causes which hide under apparent findings, and suggest alternative policies to prevent recurrence of similar intoxication Methods: We evaluated occupational health and safety characteristics of workers in micro-enterprises similar to workplaces with methanol poisoning by in depth-interview of employers, workers, and labor inspectors, and literature review. Results: The common findings of workplaces with methanol poisoning were addressed; First, the victims were illegal agency workers. Second, the workplaces were sub-contract micro-manufacturers with less than 5 employees. Investigators found that local ventilations did not work, while most of workers did not wear any proper personal respiratory protective equipment in the workplace. In addition, periodic environmental monitoring and medical check-ups were not done. However, these apparent findings do not appear to be root causes of methanol poisoning. Our in depth-analysis clarified a root cause; micro-enterprises with less than 5 employees are exempted with essential regulations of OSH Act, and employers do not know about OSH Act. Conclusions: We suggest occupational health policies to prevent recurrence of similar intoxication; First, government should introduce programs so that all employers should know about employers' responsibilities in OSH Act from the start of business. Second, even manufacturers with less than 5 employees should not be exempted with essential regulations of OSH Act. Finally, employers should take responsibilities for health and safety of all the workers including agency workers working in workplaces.
Objective: The purpose of this study is to identify the kinds and exposure levels of health hazards in the metalworking process in relation to acute poisoning accidents caused by methanol in 2016. Methods: The number of industries, workplaces, exposed workers, regional distribution, and exposure level of health hazards in metalworking process were investigated based on employee exposure assessment database provided by KOSHA (the Korea Occupational Safety and Health Agency), which was collected from workplace hazard evaluation programs in Korea. Exposure metrics for methanol were assessed by RCR (risk characterization ratio). Results: The numbers of processes, workplaces, and exposed workers of metalworking, which include CNC (computer numerical control) were 25, 14,405, and 169,102 respectively. The numbers of samples of chemical hazards including methanol were 91,325, and it was found that workers in metalworking were exposed to 249 kinds of chemical hazards. There were 16 kinds of special controlled substances including beryllium. It is estimated that the number of workplaces involving CNC process was 2,537, and the number of exposed workers was 27,976. In CNC process, the total number of workplaces handling methanol was 36, and 298 workers were estimated to be exposed. There was no exceeded that surpassed the OEL and 49% of samples were below the limit of detection. Methanol exposure concentrations in Gyeonggido Province were statistically significantly higher than in other areas (p <0.0001). Conclusions: In the metalworking process including CNC, there is exposure to a wide variety of health hazards. There was no sample exceeding the OEL for methanol. Therefore, it is necessary to recognize the limits of the employee exposure assessment system and urgently improve measures to prevent the occurrence of events like methanol poisoning.
The Ministry of Employment and Labor announced a roadmap for reducing serious accidents to create a "safe and healthy workplace, happy Korea" and ordered a risk assessment for all work processes in all workplaces on November 30, 2022. Accordingly, even workplaces that handle new chemicals must conduct risk assessment when introducing new chemicals, but the risk assessment techniques currently proposed by the government focus on preventing conventional accidents such as falls, getting caught, and bumping. Currently, there is a Chemical Hazard Risk Management (CHARM) technique that is most commonly used for chemical risk assessment, but in small and medium-sized businesses that lack professional manpower related to chemical substances, there are many technical terms in the technique and it is difficult to interpret, so its utilization is very low. Therefore, the purpose of this study is to present a method that can make risk assessment easier and simpler before handling new chemicals so that it can be used well in small and medium-sized businesses that lack professional manpower related to chemical substances. Through actual cases, the method of using CHARM was confirmed step by step, and based on this, risk reduction establishment and execution methods were derived. Based on the results of this study, it is expected that it will be used as the best tool for preventing accidents such as acute poisoning when handling chemicals in small and medium-sized workplaces that lack professional manpower related to chemical substances and make every effort to protect workers' health.
To identify the relationship between types of employment(regular and non-regular group) and departments classification (administration, product and research group) and the levels of recognition of chemical substances, a total of 117 workers in cosmetics workplaces. Mainly, regular group and research group showed higher recognition of chemical substances (PPE, ventilation, chemical management, hazards in handling chemicals, skin contact) than non-regular group and administration, product group, but In some cases, production and administrative groups were high. Descriptive statistics(SAS ver9.2)was performed. the results of recognition of chemical substances were analyzed the mean and standard deviation by t-test, and anova, (P=0.05). These results cosmetics manufacturing workplaces have normal level of the perception of chemical substances. In most of the employment types, the regular workers showed high recognition, and the working departments showed high recognition in the research and production groups. Therefore, OEM and ODM cosmetics manufacturers regularly identify characteristics and needs of workplaces and workers, and suggest the development of experience and practiced education programs and risk assessment tools that can raise worker awareness.
In this study, we investigated the elementary school students' perceptions of the scientific and technological professions by using the 'drawing scientific and technological workplaces'. The subjects were 401 students of 4th and 6th grades at three elementary schools in Seoul. The results revealed that many students drew the interiors of laboratories or factories as scientific and technological workplaces, and explained the nature of the work- place, but students' images were superficial and general. Most students' drawings also exhibited the stereotypical images of science and technology as androcentric and negative perceptions. Students were mainly inclined to perceive that the works relevant to science were experiments, and the works relevant to technology were productions and repairs. Most students answered more than two examples of scientific and technological professions, but their responses were not various and were biased toward basic scientists, blue-collar workers, and repairers. Educational implications of these findings were discussed.
Purpose: The purpose of this study was to identify the effects of occupational health service(OHS) for the aged workers in small workplace. Method: A single group of pretest-posttest design was used. 608 aged workers of 253 small workplace who had one out of 4 risk factors were randomly selected. The OHS consisted of education, medical checkup, and counseling. Also information was provided by a visiting nurse 4-5 times every 4-5 weeks from March to November, 2009. The data were collected by interview, self report, and monitored by a nurse. Results: The OHS led to significant reduction of the mean systolic and diastolic blood pressures of 6.46mmHg and 5.22mmHg, each respectively. The mean total cholesterol, glucose, and BMI were also reduced significantly by 6.35mg/dL, 5.91mg/dL, and 0.31kg/$m^2$. And stages of health behavioral change were moved from 1,2,3 stages to 4,5 stages significantly. Conclusion: The OHS showed an effective intervention to improve the aged workers' health in the small workplaces. Therefore, The OHS by visiting a nurse can be a good strategy to extend to small & medium-sized companies having no in-site health manager.
Purpose: This study is to examine the effects of the drinking-reduction program that utilizes transtheoretical model and leisure ability model on the problem drinking behavior, alcohol outcome expectancy, and abstinence self-efficacy of. problem drinkers at workplaces. Method: The subjects consisted of 54 male problem drinkers who scored over 12 points in the AUDIT-K with 23 persons in the experimental group and 31 persons in the control group. The research results were analyzed using the SAS program with Chi-square test, t-test, repeated ANOVA, and post-hoc comparison. Results: 1) The experimental group showed a significantly lower score in problem drinking behavior than the control group. 2) The experimental group showed a significantly lower score in alcohol outcome expectancy than the control group. 3) The experimental group showed a significantly higher score in abstinence self-efficacy than the control group. Conclusion: These results demonstrate that the drinking-reduction program effectively reduces the drinking behavior of problem drinkers at workplaces, reduces alcohol outcome expectancy, and enhances abstinence self-efficacy. Accordingly, it is considered that a drinking-reduction program can be a useful nursing intervention method for problem drinkers at workplaces to reduce drinking and improve the quality of life.
The analysis of the causes of accidents in workplaces where machines and tools are used is essential to improve the effectiveness and efficiency of safety prevention policies in places of employment in Korea. The causes of workplace accidents are not fully understood mainly due to difficulties in analyzing available descriptive information. This study focuses on the automated accident cause analysis in workplaces based on the accident abstracts found in industrial accident reports written in an unstructured descriptive format. The method proposed in this paper is based on text data mining and uses the keyword search function of Excel software to automate the analysis. The analysis results indicate that the primary reason for the frequency of accidents is related to technical aspects at a stage in which dangerous situations occur in the workplace. Accidents due to managerial causes are typically observed when danger exists in the workplace; however, managerial actions play a more important role in reducing accident severity. A small company tends to use unsafe machines and devices, leading to further accidents due to technical causes, whereas managerial causes are more conspicuous as the company grows. To preclude the occurrence of accidents due to inadequate knowledge, the implementation of safety management and the provision of safety education to elderly workers at the early stage of their employment are particularly important for small companies with less than 100 workers.
The Ministry of Employment and Labor implemented the process safety management(PSM) system from 1996 to prevent major industrial accidents caused by chemical substances, but the number of accidents did not drastically decrease. Even in workplaces with excellent PSM ratings, large-scale chemical accidents still occur due to non-compliance with safety work procedures and insufficient safety measures during maintenance and other work. Accordingly, the chemical accident risk warning system was introduced in 2014 to supplement the PSM system and prevent accidents that may occur during regular or unexpected maintenance and repair work. In the meantime, changes in the safety management system have been checked since the introduction of the chemical accident risk warning system at chemical handling workplaces, and based on the results, a plan for upgrading this system has been proposed. The effect of the CARW system was found to directly prevent accidents through wired and on-site consulting and post-management at the workplace and indirectly contribute to the establishment of a safety and health management system at the workplace, such as improving safety culture awareness.
The global ship repair and modification market is expected to grow up to approximately $ 30 billion by 2025. Korea's shipbuilding industry is leading the world grounded on its international competitiveness in design and production technology. The reality, however, is that the ship repair and modification industry is centered on Gyeongnam, and there are only two to three ship repair workplaces that can repair large ships. Therefore, domestic ship repair companies target small and medium-sized ships mainly. This is because there are few workplaces equipped with a large dock in which large ships like LNG ships can be inspected regularly or repaired, complaints are severe for environmental problems, and related environmental regulations are so strict that it is very hard to obtain government approval for the extension of ship repair and modification workplaces or the opening of new shipbuilding sites. Besides, on account of the workers' high wages, few experts related, and higher ship repair price compared to that of Southeast Asia, most of the volume of repairing large ships including domestic LNG ships is being lost to Southeast Asian or Chinese markets. In this study, the work process and pre-work preparation process for ship hull (winch, windlass, hatch cover, ramp door, cargo gear, anchor chain) repair were analyzed and presented to foster domestic ship repair experts and revitalize related industries.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.