• Title/Summary/Keyword: Korean Wave's Content

Search Result 87, Processing Time 0.027 seconds

Characteristics of Engineered Soils (Engineered Soils의 특성)

  • Lee, Jong-Sub;Lee, Chang-Ho;Lee, Woo-Jin;Santamarina, J. Caries
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.8
    • /
    • pp.129-136
    • /
    • 2006
  • Engineered mixtures, which consist of rigid sand particles and soft fine-grained rubber particles, are tested to characterize their small and large-strain responses. Engineered soils are prepared with different volumetric sand fraction, sf, to identify the transition from a rigid to a soft granular skeleton using wave propagation, $K_{o}-loading$, and triaxial testing. Deformation moduli at small, middle and large-strain do not change linearly with the volume fraction of rigid particles; instead, deformation moduli increase dramatically when the sand fraction exceeds a threshold value between sf=0.6 to 0.8 that marks the formation of a percolating network of stiff particles. The friction angle increases with the volume fraction of rigid particles. Conversely, the axial strain at peak strength increases with the content of soft particles, and no apparent peak strength is observed in specimens when sand fraction is less than 60%. The presence of soft particles alters the formation of force chains. While soft particles are not part of high-load carrying chains, they play the important role of preventing the buckling of stiff particle chains.

Assessment of Fatigue Damage of Adhesively Bonded Composite -Metal Joints by Acousto-Ultrasonics and Acoustic Emission (음향초음파와 음향방출에 의한 복합재료-금속 접착접합부의 피로손상 평가)

  • Kwon, Oh-Yang;Lee, Kyung-Joo
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.21 no.4
    • /
    • pp.425-433
    • /
    • 2001
  • A correlation between fatigue damage and acousto-ultrasonic (AU) parameters has been obtained from signals acquired during fatigue loading of the single-lap joints of a carbon-fiber reinforced plastic (CFRP) laminates and A16061 plate. The correlation showed an analogy to those representing the stiffness reduction $(E/E_0)$ of polymer matrix composites by the accumulation of fatigue damage. This has been attributed to the transmission characteristics of acoustic wave energy through bonded joints with delamination-type defects and their influence on the change of spectral content of AU signals. Another correlation between fatigue cycles and the spectral magnitude of acoustic emission (AE) signals has also been found during the final stage of fatigue loading. Both AU and AE can be applied almost in real-time to monitor the evolution of damage during fatigue loading.

  • PDF

Geoacoustic Model of Surface Sediments in the East of Geoje Island, the South Sea of Korea (거제도 동쪽 해역 표층 퇴적물의 지음향모델)

  • KIM, GIL YOUNG;KIM, DAE CHOUL;SHIN, BO KYOUNG;SEO, YOYUNG KYO;LEE, GWANG HOON
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.10 no.2
    • /
    • pp.129-138
    • /
    • 2005
  • Sediment texture, physical (porosity, water content, bulk density, grain density, and shear strength), and geoacoustic properties (compressional wave velocity and attenuation) were measured on eighteen core samples collected from the shelf off eastern Geoje Island, the South Sea of Korea. Based on these properties, the study area is divided into three different sub-areas: (1) Area I affected directly by the Nakdong River discharge; (2) Area II covered by the southern branch of the Nakdong River discharge; and (3) Area III dominated by relict sediment. Mean grain size, velocity, and bulk density decrease from Area $I(7.4\Phi,\;1528m/s,\;1.6g/cm^3,\;respectively)$ to Area $II(8.1\Phi,\;1485m/s,\;and\;1.5g/cm^3)$, and then increase rather rapidly in Area $III(1.4\Phi,\;1664m/s,\;and\;2.2g/cm^3)$. Porosity, on the other hand, exhibits an opposite trend, increasing from Area $I(64.5\%)$ to Area$II(73.9\%)$ and then decreasing significantly in Area $III(32.9\%)$ From the results measured and calculated, we suggest a specified geoacoustic model in the study area.

Modeling the Groundwater Flow in the Near-field of the Near-surface Disposal System (표층처분시스템 근계영역의 지하수 유동에 대한 모델링 연구)

  • Kim, Jung-Woo;Bang, Je Heon;Cho, Dong-Keun
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.18 no.2
    • /
    • pp.119-131
    • /
    • 2020
  • A numerical model was developed using COMSOL Multiphysics to evaluate groundwater flow that causes radionuclide migration in the unsaturated zone of a near-surface disposal facility, which is considered as a domestic low and an intermediate-level radioactive waste disposal facility. Each scenario was modeled by constructing a two-dimensional domain that included the disposal vault, backfill, disposal cover, and unsaturated aquifer. A comparison of the continuous and intermittent rainfall conditions exhibited no significant difference in any of the factors considered except the wave pattern of water saturation. The input data, such as porosity and residual water content of the unsaturated aquifer, were observed to not have a significant effect on the groundwater flow. However, the hydraulic conductivity of the unsaturated aquifer was found to have a significant effect on the groundwater flow. Therefore, it is necessary to assess the hydraulic conductivity of an unsaturated aquifer to determine the extent of groundwater infiltration into the disposal vault.

A STUDY ON THE FRACTURE TOUGHNESS OF DENTAL COMPOSITE RESINS (치과용 복합레진의 파괴인성에 관한 실험적 연구)

  • Park, Jin-Hoon;Min, Byung-Soon;Choi, Ho-Young;Park, Sang-Jin
    • Restorative Dentistry and Endodontics
    • /
    • v.15 no.2
    • /
    • pp.17-33
    • /
    • 1990
  • The purpose of this study was to evaluate the fracture toughness of dental composite resins and to investigate the filler factor affecting the fracture behaviour on which the degree of fracture toughness depends. Six kinds of commercially available composite resin;, including two of each macrofilled, microfilled, and hybrid type were used for this study, The plane strain fracture toughness ($K_{10}$) was determined by three-point bending test using the single edge notch specimen according to the ASTM-E399. The specimens were fabricated with visible light curing or self curing of each composite resin previously inserted into a metal mold, and three-point bending test was conducted with cross-head speed of 0.1mm/min following a day's storage of the specimens in $37^{\circ}C$ distilled water. The filler volume fractions were determined by the standard ashing test according to the ISO-4049. Acoustic Emission(AE), a nondestructive testing method detecting the elastic wave released from the localized sources In material under a certain stress, was detected during three-point bending test and its analyzed data was compared with, canning electron fractographs of each specimen. The results were as follows : 1. The filler content of composite resin material was found to be highest in the hybrid type followed by the macrofilled type, and the microfilled type. 2. It was found that the value of plane strain fracture toughness of composite resin material was in the range from 0.69 MPa$\sqrt{m}$ to 1 46 MPa$\sqrt{m}$ and highest In the macrofilled type followed by the hybrid type, and the microfilled type. 3. The consequence of Acoustic Emission analysis revealed that the plane strain fracture toughness increased according as the count of Acoustic Emission events increased. 4. The higher the plane strain fracture toughness became, the higher degree of surface roughness and irregularity the fractographs demonstrated.

  • PDF

Studies on the Frost Heave Revelation and Deformation Behaviour due to Thawing of Weathered Granite Soils (화강암 풍화토의 동상 발현 및 융해에 따른 변형 거동에 관한 연구)

  • 류능환;최중대;류영선
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.37 no.3_4
    • /
    • pp.61-71
    • /
    • 1995
  • Natural ground is a composite consisted of the three phases of water, air and soil paircies. Among the three components, water as a material is weU understood but soil particles are not in foundation engineering. Especially, weathered granite soil generally shows a large volumetric expansion when they freeze. And, the stability and durability of the soil have shown decreased with repetitive freezing and thawing processes. These unique charcteristics may cause various construction and management problems if the soil is used as a construction material and foundation layers. This project was initiated to investigate the soil's physical and engineering characteristics resulting from freezing and freezing-thawing processes. Research results may be used as a basic data in solving various problems related to the soil's unique characteristics. The following conclusions were obtained: The degree of decomposition of weathered granite soil in Kangwon-do was very different between the West and East sides of the divide of the Dae-Kwan Ryung. Soil particles distributed wide from very coarse to fine particles. Consistency could be predicted with a function of P200 as LL=0.8 P200+20. Permeability ranged from 10-2 to 10-4cm/sec, moisture content from 15 to 20% and maximum dry density from 1.55 to 1.73 g /cmΥ$^3$ By compaction, soil particles easily crushed, D50 of soil particles decreased and specific surface significantly increased. Shear characteristics varied wide depending on the disturbance of soil. Strain characteristics influenced the soil's dynamic behviour. Elastic failure mode was observed if strain was less than 1O-4/s and plastic failure mode was observed if strain was more than 10-2/s. The elastic wave velocity in the soil rapidly increased if dry density became larger than 1.5 g /cm$^3$ and these values were Vp=250, Vg= 150, respectively. Frost heave ratio was the highest around 0 $^{\circ}C$ and the maximum frost heave pressure was observed when deformation ratio was less than 10% which was the stability state of soil freezing. The state had no relation with frost depth. Over freezing process was observed when drainage or suction freezing process was undergone. Drainage freezing process was observed if freezing velocity was high under confined pressure and suction frost process was occurred if the velocity was low under the same confined process.

  • PDF

From Multivalent Mediality to Cross-Sector Synergy: The Archetypal Function of Dramatized Blockbuster Ballad Music Videos in Hallyu Entertainment (한류 컨텐츠의 원형으로서의 서사적 블록버스터 발라드 뮤직 비디오 고찰)

  • Shin, Haerin
    • Review of Culture and Economy
    • /
    • v.20 no.1
    • /
    • pp.21-50
    • /
    • 2017
  • The rise of Hallyu (Korean Wave) has generated a treasury of historiographic and cultural inquiries into the phenomenal success of South Korea's media entertainment industry. Whereas the majority of such studies focus on TV dramas and popular music, there is a medium, or rather a hybrid sub-genre within the medium category of short films, that must be reexamined and thus appreciated as the archetypal predecessor of popular Hallyu contents: music videos. The rapidly changing social, political, and economic climate in the mid- to late 1990s called for content that would grasp the attention of a younger, increasingly mobile population with diversified interests and routines that no longer guaranteed fixed-time viewership. Meanwhile, the advent of cable TV channels and high-speed internet service ensured greater temporal and infrastructural accessibility. The media entertainment industry's response to the new opportunities and challenges arising from these sudden growths in the scale, range, connectivity, and mobility of consumer demographics was synergetic cross-sector collaboration in the form of dramatized blockbuster music videos, which combined two popular and lucrative genres: trendy dramas and ballad music. In this essay, by relocating Hallyu's archetypal medium/genre, I claim that increasing upward and sideways mobility across sectors not only inspired new production but also reconfigured the very concept, form, and impact of media-driven cultural imaginary in South Korea.

A Study on the Development of the Traditional Design Content in health and longevity based on the Lucky Signs (길상(吉祥)을 상징하는 수복(壽福) 중심의 전통적인 디자인 콘텐츠 개발에 대한 방향성 연구 - 문화상품디자인 중심으로 -)

  • Jung, Su-yeon;Hong, Dong-sik
    • Journal of Communication Design
    • /
    • v.66
    • /
    • pp.90-101
    • /
    • 2019
  • South Korea had a hard time creating its own image of a nation that formed its identity due to 6.25, Japanese-style rule, division of South and North Korea, and military dictatorship. Recently, Korea has been searching and spreading its identity by creating a Korean wave such as various events and K-POPs. However, since there are still no images and cultural products representing Korea's identity, it is necessary to develop design contents related to native culture and professional cultural product design. Design powers such as France and Japan focus on design projects that can add value to their national design policy projects. Traditional Korean contents also need to be specialized and continuous in image design and research. In this study, five lucky-SubokGangnYeon(long life, happiness and peace), a representative of Korean culture, studied with the most interest in the old and the modern, namely, "Living healthy long." Through the development of cultural product design and the use of design content, I would look forward to presenting the diversity and direction in producing Korea's own design products and images that fit the trend of modern 'age of 100.' Based on images based on special exhibitions related to longevity of the National Folk Museum of Korea, the museum discovers key used features and meanings, studies patterns and patterns, and analyzes design cases applied to modern cultural product design. We also want to look at the direction available through design content, which is a symbol of llong life happiness and peace. First, cultural products have limitations that lack the development of design products, lack of public relations and sales outlets, and lack of awareness of traditional culture, which should precede policy support and awareness reform at the national level. Second, we need to streamline prices that meet the needs of the market. Third, cultural product design and contents related to tradition can be settled and disseminated more easily when traditional design is utilized and distributed mainly on practical stationery and household goods. Fourth, it is necessary to develop contents of various Korean images based on research on Korean cultural history and aesthetic consciousness. Research on the Korean culture of designers should be conducted, not just in the form of figurative images. Fifth, traditional manufacturing methods and materials should be respected by modern times, but modern production products should be developed with economy and durability.

Problems and Directions for Improving Idol Bias in the Domestic Music Market (국내 음악시장에서 두드러진 아이돌 편중 현상의 문제점과 개선방향)

  • Yang, Young-Min;Han, Kyung-Hoon
    • Journal of Korea Entertainment Industry Association
    • /
    • v.15 no.8
    • /
    • pp.1-18
    • /
    • 2021
  • Idol music, which began to gain huge popularity in the domestic music market in the mid-1990s, has become one of the major global contents thanks to the global popularity of K-POP. As a result, the Korean music market continues to grow, forming the world's sixth-largest music market, and domestic music agencies are focusing more on fostering idol groups and producing idol music. The global success of idol music is surprising, but this has resulted in the domestic music market being biased toward idol music. As a result of the study, it was confirmed that there are several problems with the phenomenon of being biased toward similar types of musicians and music content. First, just as trend-oriented cultural contents face the problem of life expectancy all the time, the "Korean Wave" is also forced to think in terms of identity and sustainability. Second, it was observed that only consumers of a certain age may cause cultural alienation of other age groups, and thirdly, various problems such as shrinking creative paths due to the size of the cost required for idol group production and the lifespan of idol musicians' art activities. This paper derives the reality of the domestic idol bias phenomenon through comparative analysis of the English-American music market and the domestic music market, which have had a profound influence on the global music market in popular music history, and verified the theory and results through an expert survey using the Likert scale. In addition, the problems caused by the idol bias phenomenon were considered based on the theory of cultural diversity, and improvement directions were also suggested to solve this problem.

Analysis of Changing Aspect of Korean Cultural Contents in Japanese Textbooks (일본 교과서에 나타난 한국문화 콘텐츠 변화 양상 분석)

  • Park, So-Young
    • The Journal of the Korea Contents Association
    • /
    • v.13 no.11
    • /
    • pp.492-501
    • /
    • 2013
  • This study is aimed to track down on changes in the way Korean culture was covered in Japanese textbooks over the past three decades since the 1980s by reviewing 'social studies' textbooks for the 6th graders in elementary school and 'geology' textbooks for middle school, which are two compulsory subjects in Japanese schools where Korean cultures is the most often mentioned. To that end, Korean culture contents mentioned in the textbooks were classified into basic element, unique element and element that reflect the times, each of which was then divided into the categories of traditional & modern and surface & in-depth so as to see how each of the categories was presented. Japanese textbooks mentioned mostly surface and basic elements of Korean culture relating to food, clothing and shelter, such as Hanbok, Kimchi, Ondol, high-rise apartment and table manners, and also landscape of Seoul. Also, the kinds of contents which constantly appeared in the textbook were mostly basic elements including to food, clothing and shelter. Elements that reflect the times such as the 1988 Seoul Olympic Games, the 2002 Korea-Japan World Cup and the Korean Wave were adequately covered as part of chronological explanations in the books. The aspect of Korean culture in Japanese textbooks seems to expand in depth and scope over the years. More recently, detailed explanations and visual images were increasingly used to introduce Korean culture.