• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.925-926
• /
• 2013

• 건축역사연구
• /
• 제16권1호
• /
• pp.69-82
• /
• 2007

[ $\sqcap$ ]' shape of Jeonnam Area has not been well-known so far. This study is about when, how and on what type the '$\sqcap$' shape had settled among many 'ㅡ' shape houses. The Anchae of Jeonnam Area which appeared 17C. contrasts with 'ㅡ' shape. Especially, the head family's house might have been expected to develop with special difference. 'ㅡ' shape had been built much more than the '$\sqcap$' shape around 20C when modernization had been ripen. It was big event that '$\sqcap$' shape, the head family's house, had been pulled down and then 'ㅡ' shape had been newly built. (Ui Seong-ryeol house) The reason why 'ㅡ' shape had been built instead of '$\sqcap$' shape might be that people accepted the change of 'modernization', that is to say, people accepted convenience and opening. The plan of '$\sqcap$' shape consists of Daecheong and Anbang at the center of Momche, and Jageunbang and Jangji at both sides. In the '$\sqcap$' shape, the center of Momche is wide dand light unlike 'ㅡ' shape. Unjoru, Nogudang, Yundoseo house have long wing and have more encircling Anmadang than other houses, which are well known for a house for a man of noble birth.

• 한국의류학회지
• /
• 제30권4호
• /
• pp.542-553
• /
• 2006

The purpose of this study were to analyse of craniofacial shape by 3D and to develope of head models for Korean adults with gender and age groups. The 3D measurement technique adapted in this study was a novel approach compared that the same technique has been commonly used in measuring human bodies. The data and the model of head analysis can be used as a basic reference in developing various head related items such as hat, helmet, gas mask, ear phone, and etc. In this study, heads of 836 Korean adults were measured in 3D, analyzed by statistical methods, and modelized in 3D by gender and age groups. From the basic statistical data analysis, vertex-tragion and the length between the pupils were the longest in their twenties for both men and women, and grew shorter in elderly groups. In all categories, a significant difference appeared between men and women in their 20's, but the differences were less noticeable in elderly groups. Compared to the one size standard head model of the Korea Occupational Safety and Health Agency, the above three-dimensional standard head model would provide a more through fit because gender and age groups were sub-divided and analyzed in 3D.

• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.393-405
• /
• 1996

This study was performed to investigate the effects of changes of head posture and cervical spine shape on the mandibular resting or clenching electromyographic(EMG) activity in anterior temporalis(TA), masseter(MM), sternocleidomastoid muscle(SCM) and trapezius insertion(TI). 30 patients with Temporomandibular Disorders(TMDs) participated in this study. EMG activity($\mu$V) at rest and clenching was observed in four head postures, namely natural head posture(NHP), forward head posture(FHP), upward head posture(UHP), and downward head posture(DHP). For taking in upward or downward head posture head was inclined 10$^{\circ}$ upward or downward and CROM$^\textregistered$(cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure, and BioEMG$^\textregistered$ (Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles at eight locations on both sides. The recorded EMG activity($\mu\textrm{V}$) were compared and analyzed by cervical spine shape such as the head position from plum line, cervical curvature, and cervical inclination. Head position from plum line was measured in vertical plate calibrated with cm scale, comical curvature by radius was measured with adjustable curved ruler, and cervical inclination by cervical vertebrae tangent(CVT)was measured in lateral cephalograph. The results obtained were as follows : 1. Mean value of head position from plum line, cervical curvature, and cervical inclination were 4.8cm, 26.7cm, and 86.6$^{\circ}$, respectively, And There were no correlationship among these items. 2. For resting EMG activity by head posture, the value in anterior temporalis was higher at FHP than at DHP, the value in masseter was higher at FHP than at NHP, and DHP, the value in sternocleidomastoid muscle was higher at UHP than at NHP, and the value in trapezius insertion was higher at FHP and DHP than, NHP and UHP. The clenching EMG activity, however, did not show any difference by head posture. 3. Comparison of resting and clenching EMG activity between higher and lower groups by head position from plum line, cervical curvature, and cervical inclination did not show any significant difference. From this result, the author concluded that the cervical spine shape had not significantly affected to EMG activity in usual patients with TMDs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.771-776
• /
• 2002

Optimal shape of the NFR suspension is studied and developed to improve the dynamic performance and reduce the vibration of the suspension system including a optical head slider. Since accurate position control and stability of the slider motion are highly required in NFR due to the narrower track width and the heavier slider than HDD slider with the low flying height, the dynamic characteristics of the suspension are very important to the mechanical performance of the system. The first natural frequencies in flexural and lateral motion of the suspension are critical factors affecting the dynamics and stability of the flying head, so that the dynamic parameters should be designed properly to avoid an excessive vibration or a crash of the slider on the disk. This paper optimizes the shape of the suspension based on homogenization method in NASTRAN and develops a new suspension shape for NFR system. The suspension is tested on experiment to verify the improvement of the dynamic characteristics.

• 한국통신학회논문지
• /
• 제32권2C호
• /
• pp.141-149
• /
• 2007

영상에서 사람의 머리위치를 찾는 문제에 있어서 어깨선 정보를 이용하는 것은 아주 유용하다. 영상에서 머리 외곽선과 어깨선의 형태는 일정한 변형을 유지하면서 같이 움직이므로 이를 ASM(Active Shape Model) 기법을 사용해서 통계적으로 모델링 할 수 있다. 그러나 ASM 모델은 국부적인 에지나 그래디언트에 의존하므로 배경 에지나 클러터 성분에 민감하다. 한편 AAM(Active Appearance Model) 모델은 텍스쳐 등을 이용하지만, 사람의 피부색, 머리색깔, 옷 색깔 등의 차이로 인해서 통계적인 학습방법을 쓰기가 어렵고, 전체 비디오에서 외모(Appearance)가 시간적으로 변한다. 따라서, 본 논문에서는 외모(Apperance) 모델을 변화에 따라 바꾸는 대신, 영상의 각 화소를 머리, 어깨, 배경으로 구분하는 분별적 외모 모델(discriminative appearance)를 사용한다. 실험을 통해서 제안된 방법이 기존의 기법에 비해서 포즈변화와 가려짐, 조명의 변화 등에 강인함을 보여준다. 또한 제안된 기법은 실시간으로 작동하는 장점 또한 가진다.

• 대한가정학회지
• /
• 제43권6호
• /
• pp.13-25
• /
• 2005

The purpose of this study was to analyse craniofacial shape by 3D scanner for Korean adult head shape by age group. The heads of 836 adults were measured by 3D scanner, and the 25 obtained measurements were analyzed by statifical methods. The results can be summarized as follows. 1. From the basic statistical data analysis, the vertex-tagion and the length between the pupils were the longest in the subjects in their twenties, and decreased in elderly groups. 2. According to the analysis of the craniofacial proportion, the typical adult Korea head type was short-headed. 3. Statistically noticeable differences were found in the ectocanthion- opistcranion by the measurement of the left and the right sides of face in the age groups of the 20s, 30s, 40s, and 50s. 4. The order of factor analysis was as follows: the horizontal length, the perpendicular length and the width from the highest in the age group of the 20s, 30s, 40s, and 50s.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.985-990
• /
• 1995

Recently, the development of high speed and high precision NC-lathe for piston head machining is needed for the complexity and diversity of the piston head shape used in automobile reciprocating engine. THe piston head has many complex shapes in the aspect of fuel economy, such as ovality, profile, double ovality and recess. Among them, for the maching of the over shape of 0.1~1mm the cutting tool should move periodically symchronized with the rotation of piston workpiece. The cutting tool feeed system must have high positioning accuracy for the precise machining, high speed for the fast maching and high dynamic stiffness for the cutting force. The linear brushless DC motor is used for satisfying these coditions. The ballbush guide and supporting guide using turcite is used for the guidance of the feed drive system. Linear encoder, digital servo ampllifer and controller are used for driving the motor. THis paper presents the design and simulation of the new tool feed system for noncircular machining.

• 한국결정성장학회지
• /
• 제25권4호
• /
• pp.140-144
• /
• 2015

Tonpilz 트랜스듀서에서 head mass에 영향을 미치는 요소로써 그 형상과 무게 및 소재의 영향을 연구하였다. 형상 요소로는 head mass의 옆면이 대칭 축과 이루는 각도를 그 인자로 하여 0도, 35.5도, 60도로 변화시키면서 대역폭과 출력의 변화를 모사하였다. 그 결과 Al의 경우에는 35.5도에서 대역폭이 최대 값이 되었으며 그 때의 대역폭은 86.4 %로 계산되었다. Head mass의 중량은 대역폭에는 큰 영향이 없이 출력에만 영향을 미치는데 중량이 25 % 감소하였을 때 20 % 정도 출력이 증가하였다. 끝으로 head mass의 소재를 Ti로 변경하였을 때에는 밀도의 차이에 의한 무게의 증가에도 불구하고 출력이 100 % 향상되었는데 이는 Ti의 탄성률 같은 기계적 특성의 영향으로 판단되며 최대의 대역폭을 얻기 위한 형상은 45도에서 얻어졌고 대역폭은 88.1 %이었다.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.155-160
• /
• 2008

End part of the brake tube formed with the shape of snake head is important for the braking of automobile in safety because it has to prevent crack, fracture and defects occurred during the forming process. Especially, the shape of tube end has influence on the ability of brake. Based on the procedure of process design, in this paper, the forming operation is done by finite element method and the design variables are analyzed by Taguchi method. Design variables such as the outer angle of tube end with the shape of snake head(A), the inner angle to make a hole at tube end with the shape of snake head(B) and the forming distance at tube end(C) are used. Optimization of design variables is performed to minimize the damage factor of the tube end occurred during the forming process. The value of damage factor of 0.327 was obtained under the optimal condition like $A=114^{\circ},\;B=80^{\circ}$ and C=5.3mm, respectively.