• 한국작물학회지
• /
• 제49권1호
• /
• pp.46-51
• /
• 2004

The film coated snap bean (Phaseolus vulgaris) seeds with five different coating materials treated with 3% increase in seed weight were planted at sandy loam soil controlled moisture content of 18, 19, 20 and 21 %. The oxygen diffusion rate (ODR) was calculated from the different moisture content soil. The number of normal seedlings, seedling vigor, and seedling capability in field (seed vigor x dry matter weight) were observed at 9 days after planting and compared to the changes of ODR. The germination rate and ODR were sharply decreased simultaneously in the seeds planted at 21 % soil moisture content. Seedling emergence did not occur at all as the soil moisture content increased above 22 %. Hence this value should be considered as the threshold of soil moisture content for seedling emergence. An ODR value under 20% did not influence the percent emergence significantly. The certain difference observing in the emergence at the same ODR was not related clearly to the condition of soil. So it can be assumed that the limit of soil moisture content for the emergence of snap bean was approximately 20%. The value of 18% soil moisture content may be considered as the optimum for snap bean emergence. There was close relationship between the mean value of ODR in different soil moisture contents and the emergence. The germination rates of the seeds coated with the different materials were quite different when the seeds were planted at 21 % soil moisture. Dry weight of the seedlings from film coated seeds was decreased slightly, but the germination rates were not much different from the non-treated control under relatively higher soil moisture content (21 %). Major factor lowering emergence rate was oxygen stress while film coating act as a minor constraint for snap bean sown in excess soil moisture condition.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.246-256
• /
• 2010

This study studies on the physical property of MWNT/PU composite film for electrostatic dissipation (ESD) function by dispersing multi-wall carbon nanotubes (MWNT) in dimethylformamide (DMF) and by combining it with polyurethane(PU). For this purpose, four kinds of MWNT were selected and the composite films were made by dispersion processing, and their physical properties were measured and investigated in terms of electrical conductivity. For dispersion parameters, four MWNT contents(0.5, 1, 2, 5wt%) and two dispersion times(30min, 120min) were selected. The dispersion property and the electrical conductivity of MWNT/PU film was measured using a UV-Vis spectrometer and conductivity measuring apparatus. Finally, their physical properties according to the dispersion conditions were analyzed and discussed with various processing conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.106-106
• /
• 2009

Al-doped ZnO (AZO) thin films were grown on glass substrates by co-sputtering at room temperature. We made ZnO and Al target and ZnO:Al film is deposited with sputter which has two RF gun source. The Al content was controlled by varying Al RF power and effect of Al contents on the properties of ZnO:Al film was investigated. Crystallinity and orientation of the ZnO:Al films were investigated by X-ray diffraction (XRD), surface morphology of the ZnO:Al films was observed by atomic force microscope. Electrical properties of the ZnO:Al films were measured at room temperature by van der Pauw method and hall measurement. Optrical properties of ZnO:Al films were measured by UV-vis-NIR spectrometer.

• 생물환경조절학회지
• /
• 제27권1호
• /
• pp.80-85
• /
• 2018

이 연구는 CHO-CO와 PO필름이 시설 내 기온과 참외의 특성, 수량에 미치는 영향을 구명하고자 수행되었다. 2017년 1월 8일 기온의 일변화 조사에서 조광필름 처리구의 최고, 최저 및 평균 기온은 각각 $38.9^{\circ}C$, $13.4^{\circ}C$, $20.1^{\circ}C$ 이었고, PO필름 처리구에서 각각 $40.0^{\circ}C$, $14.9^{\circ}C$, $20.3^{\circ}C$로 처리 간 차이가 거의 없었고, 2월부터 5월까지 과실특성, 품질 및 수량 조사에서도 처리 간 차이가 없었다. 그러나 고온기인 8월 7일부터 1일간 기온의 일변화에서 조광필름 처리구의 최고, 최저 및 평균 기온은 각각 $47.2^{\circ}C$, $23.1^{\circ}C$, $32.4^{\circ}C$ 이었고, PO필름 처리구에서도 각각 $50.3^{\circ}C$, $23.6^{\circ}C$, $34.0^{\circ}C$로 조광필름 처리구에서 최고 및 평균기온이 각각 $3.1^{\circ}C$, $1.6^{\circ}C$ 더 낮았다. 특히 주간의 기온만 비교해 보면 저온기에는 차이가 거의 없지만 고온기에는 PO필름에 비해 조광필름 처리구에서 $3.0^{\circ}C$까지 기온이 낮아지는 것을 알 수 있었다. 2017년 5월 26일부터 8월 15일까지의 고온기의 품질 및 수량 조사에서도 PO필름 처리구에 비해 조광필름 처리구에서 과중이 371.6g으로 22.2g 더 가볍고, 태좌부의 당도는 $14.5^{\circ}brix$로 $1.4^{\circ}brix$ 더 높고, 과피의 색도(a값)도 12.3으로 1.5 더 높고, 상품과율도 89.4%로 8.0%P 증가하였고 10a당 상품수량도 2,694kg으로 26% 증가하였다. 결론적으로 고온기에 조광필름은 참외 생산에 효과적으로 이용될 수 있을 것이다.

• 한국식품저장유통학회지
• /
• 제23권2호
• /
• pp.166-173
• /
• 2016

본 연구에서는 과채류의 포장실태를 조사하고, 포장방법을 달리한 토마토 및 파프리카의 저장 중 품질변화를 측정하였다. 포장실태조사는 서울에 소재한 백화점, 대형할인 마트, 동네슈퍼마켓을 대상으로 조사하였으며 주로 골판지 상자, PP, LDPE, PS, PVC 등의 재질로 포장되어 있었다. 이를 바탕으로 토마토와 파프리카의 포장형태별 품질변화를 측정하기 위하여 토마토는 골판지 상자+PP film, PP film bag, 파프리카는 PP film bag, 스티로폼 tray+PVC film wrapping 형태로 포장한 후 상온저장하며 품질변화를 측정 하였다. 저장 48시간 후 포장하지 않은 토마토와 파프리카의 중량감모율이 다른 처리구에 비하여 증가하였으며 경도는 저장 중 감소하였다. 골판지 상자로 포장한 토마토는 저장 중 가용성 고형분 함량이 유의적으로 높았던 반면, pH값은 처리구 중에서 가장 낮았으며 유의적인 차이는 없었다. 토마토는 골판지 상자+PP film, 파프리카는 PP film bag으로 포장한 경우 저장 중 품질유지에 효과적이었다.

• Journal of Magnetics
• /
• 제14권2호
• /
• pp.80-85
• /
• 2009

The mineral dissolution sensor system using GMR-SV and glass/Mg(200 nm) was prepared and characterized. The magnetic field sensitivity of GMR-SV to microscopic magnetic variation was about 0.8%/Oe. The change that occurs when Mg-film dissolves in water, the solubility of water, which is one of the basic properties of mineral water, was sensed by measuring the subtle variation of an electric current. In the case of edible water with Mg mineral added, bubbles were generated on the surface of the Mg film in the first 45 minutes, and the number of drops that were dissolved more rapidly than with the tap and DI waters later reduced to zero. For the edible water samples that each had different mineral Mg concentrations, the Mg solubility speed significantly differed. After injecting Mg film into the edible water, the magnetoresistance of the output GMR-SV signal decreased from a maximum of $45.4\;{\Omega}$ to a minimum of $43.6\;{\Omega}$. The measurement time was within 1 min, giving the rate of change ${\Delta}R/{\Delta}t=0.18\;{\Omega}/s$. This measurement system can be applied to develop a mineral Mg solubility GMR-SV sensor that can be used to sense the change from edible water to reduced alkali.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.149-154
• /
• 1996

ZnO and Al-doped ZnO thin films were prepared by sol-gel dip-coating method and electrical and optical properties of films were investigated. Using the zinc acetate dihydrate and acetylaceton(AcAc) as a chelating agent stable ZnO sol was synthesized with HCl catalyst. Adding aluminium chloride to the ZnO sol Al-doped ZnO sol could be also synthesized. As Al contents increase the crystallinity of ZnO thin film was retarded by increased compressive stress in the film resulted from the difference of ionic radius between Zn2+ and Al3+ The thickness of ZnO and Al-doped ZnO thin film was in the range of 2100~2350$\AA$. The resistivity of ZnO thin films was measured by Van der Pauw method. ZnO and Al-doped ZnO thin films with annealing temperature and Al content had the resistivity of 0.78~1.65$\Omega$cm and ZnO and Al-doped ZnO thin film post-annealed at 40$0^{\circ}C$ in vacuum(5$\times$10-5 torr) showed the resistivity of 2.28$\times$10-2$\Omega$cm. And the trans-mittance of ZnO and Al-doped ZnO thin film is in the range of 91-97% in visible range.

• 한국응용과학기술학회지
• /
• 제24권2호
• /
• pp.149-159
• /
• 2007

In order to prepare high-solid coatings, acrylic resins, HSCs [poly (EA/EMA/2-HEMA/CLA)] that contain 90% solid, were synthesized by copolymerization of ethyl acrylate (EA), ethyl methacrylate (EMA), 2-hydroxyethyl methacrylate (2-HEMA) and caprolactone acrylate (CLA). The high-solid coatings named as CHSCs (HSCs/HDI-trimer) were prepared by the curing reaction between the acrylic resins containing 90% solid contents and the isocyanates (HDI-trimer) curing agent room temperature. The curing behavior and various properties were examined on the film coated with the both high-solid coatings. The glass transition temperatures $(T_g)$ of CHSCs increased proportionally with increasing the predicted $T_g$ value by Fox equation, and had nothing to do with the solid contents. The prepared film showed good properties for $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion and heat resistance, and bad properties for pencil hardness, drying time, and pot-life. Among the film properties, the heat resistance was very excellent and could be explained by the introduction of functional monomers of CLA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.106-109
• /
• 2005

The $(Sr_{1-x}Ca_x)TiO_3$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/$SiO_2$/Si) using RF sputtering method with substitutional contents of Ca. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin film was about 18.75[$\AA$/min]. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The capacitance characteristics had a stable value within ${\pm}4$[%] in temperature ranges of -80~+90[$^{\circ}C$].

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.288-293
• /
• 2013

Zn-In-Sn-O films were prepared at room temperature by combinatorial RF-magnetron co-sputtering system. The cationic contents of the films were varied using a compositionally combinatorial technique. The effects of the oxygen partial pressure and film compositionon the structural and electrical properties were investigated. The Zn-In-Sn-O films deposited at Ar gas atmosphere showed an amorphous phaseirrespective of the film composition. However, the amorphous Zn-In-Sn-O films with a Zn content below 30.0 at% were converted into a bixbyite type-ITO polycrystalline phase with an increase in the oxygen partial pressure. The resistivity, carrier concentration, and Hall mobility were strongly affected by the oxygen partial pressure and chemical composition of the film. At sufficiently high carrier densities above $5{\times}10^{18}cm^{-3}$, the conduction behavior of amorphous Zn-In-Sn-O film changes from thermally activated to degenerate band conduction accompanied with high mobility.