• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.530-535
• /
• 2006

The Pusan clays are soft and thick deposits and in some places, they reach even up to 50-70m. So, the pile foundations are inevitable in almost all cases. But they are significantly expansive when the length of the pile reaches about 70m. In this study, a comprehensive parametric study has been carried out in order to reduce the pile length and number of piles required in turn the cost of the foundation for particular building. A belled shaft pile has been optimized for a typical soil profile using the PLAXIS (FEM code). These results have shown a new direction of the pile foundation in Pusan, Korea. The results including the variation of contact pressures at the bottom of the bell, optimization of the angle of the bell and height of the bell in terms of the diameter of the shaft. And also, the design curves have been generated so that they can be directly used for design of belled shaft foundations. However, the structural strength criterion is being checked in the concerned laboratory.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.192-200
• /
• 2021

Korean bell is a macroscopically axi-symmetrical structure, but has a slight asymmetry due to complex patterns and casting irregularity. Small asymmetry separates one vibration mode into a mode pair with slight frequency difference. The mode pair interferes and creates a beat. The vivid beat with an appropriate period makes the bell sound magnificent and lively feeling. In this study, we propose a method to make the vivid beat using artificial dumshoi. This method creates the vivid beat by designing artificial dumshoi that overwhelms the bell asymmetry. To this end, the asymmetry of Korean bell is quantified by analyzing the beat period data of a number of Korean bells cast in modern times. Based on the measured beat period data, the magnitude of asymmetry is quantified using an equivalent bell model and artificial dumshoi is applied. The movement of mode pair by dumshoi is predicted through finite element analysis. Finally, a design example of the artificial dumshoi for clear beat is introduced.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.471-478
• /
• 2016

For the distribution of fresh produce, the thermoelectric cooling system combined with thermo electric materials (TEM) and phase change material (PCM) was studied. The PCM used this study was produced by in-situ polymerization technology which referred microencapsulation of hydrocarbon (n-tetradecane and n-hexadecane). In this study, quality characteristics of bell peppers in thermoelectric cooling system combined with TEM and PCM were analyzed and control was placed in an EPS (expanded polystyrene) box. As a result of quality characteristics analysis, weight of bell peppers decreased and moisture content of bell peppers was 90.96~94.43% during storage. Vitamin C content of bell pepper decreased during storage and reduction ratio of control was higher than that of BPT-5 treatment(bell pepper in thermoelectric cooling system with PCM which is kept the temperature at $5^{\circ}C$). The result of color value, on 21 day, ${\Delta}E$ value of BPT-5 treatment was 5.05 while that of control was 41.8. On 21 day, total bacteria count of BPT-5 treated bell pepper shown less than that of control. In conclusion, it suggested that the thermoelectric cooling system combined with PCM improved quality of fresh produce during transportation and storage.

• Annals of Clinical Neurophysiology
• /
• v.6 no.2
• /
• pp.75-79
• /
• 2004

Backgrounds: Electrodiagnostic tests have been developed to estimate the degree of facial nerve injury during the acute phase. Side-to-side amplitude comparison with the affected side expressed as a percentage of the nonaffected side has been one of the most valuable electrophysiologic methods of assessing facial nerve functioning. This study was designed to know whether there is any difference in the side-to-side comparison of amplitudes and terminal latencies of the compound muscle action potentials (CMAP) of the facial muscles in the patients with Bell's palsy. Methods: Electroneurographic recordings with surface electrodes on the frontalis, orbicularis oculi, nasalis, and orbicularis oris muscles were made within 2 weeks post-onset (mean, day 7) in 39 patients. Results: Of the 39 Bell's palsy patients, 38 patients (97.4%) recovered satisfactorily within 6 months. The amplitude of CMAP in all patients was not reduced to 10% or less of that of the contralateral healthy muscle. The correlation of amplitude change between four facial muscles was relatively strong, but the correlation of latency change was weak. When the electroneurographic values were compared in the four muscle groups, the general linear models procedure did not show any significant difference for CMAP amplitude and latency changes (p=0.62-0.63). Conclusions: This study did not show any significant clinical advantage of electroneurographic recordings in more than one facial muscle at the early stage of Bell's palsy.

• Journal of Acupuncture Research
• /
• v.29 no.5
• /
• pp.51-59
• /
• 2012

Objectives : This study was to investigate the efficacy of Scolopendrid pharmacopuncture on relieving postauricular pain which was an early symptom of Bell's palsy. Methods : Clinical observation was done on 32 patients diagnosed with Bell's palsy in Cheon-ahn Oriental Medical Hospital of Daejeon University from November 11, 2011 to August 31, 2012. The patients were divided into 2 groups; group A received conventional treatment alone and group B received conventional treatment as well as Scolopendrid pharmacopuncture treatment. Results : 1. Scolopendrid pharmacopuncture group(group B) exhibited significantly reduced postauricular pain compared to conventional treatment group(group A). 2. Group B had significantly shorter duration of postauricular pain than group A. 3. Group B group showed better outcome than the group A but the difference was not significant. Conclusions : Scolopendrid pharmacopuncture shows a significant beneficial effect on postauricular pain as an early symptom of Bell's palsy.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.1
• /
• pp.52-62
• /
• 2012

Purpose: This study was done to evaluate the effects of Doin Gigong Exercise on the Recovery from Facial Paralysis, pain and anxiety in patients with Bell's palsy. Methods: A nonequivalent control group posttest-only non-synchronized design was used for this study. Participants were contacted at the oriental medicine ward of D hospital in Busan and assigned to either the experimental group (25) or control group (25). Collected data were analyzed for changes in recovery from facial paralysis, in pain and in anxiety between pre and post Doin Gigong Exercise. Data analysis was done using t-test, Fisher's exact test, $x^2-test$ with the SPSS 12.0 Win program. Results: There were significant decreases in the lip paralysis status pain and in anxiety between pre and post Doin Gigong Exercise. Conclusion: The results indicate that Doin Gigong Exercise is effective for patients with Bell's palsy to decrease lip paralysis, pain and anxiety and therefore, an effective intervention for use with patients with Bell's palsy.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.2053-2065
• /
• 2003

The current trend in automotive finishing industry is to use more electrostatic rotating bell (ESRB) need space to their higher transfer efficiency. The flow physics related with the transfer efficiency is strongly influenced by operating parameters. In order to improve their high transfer efficiency without compromising the coating quality, a better understanding is necessary to the ESRB application of metallic basecoat painting for the automobile exterior. This paper presents the results from experimental investigation of the ESRB spray to apply water-borne painting. The visualization, the droplet size, and velocity measurements of the spray flow were conducted under the operating conditions such as liquid flow rate, shaping airflow rate, bell rotational speed, and electrostatic voltage setting. The optical techniques used in here were a microscopic and light sheet visualization by a copper vapor laser, and a phase Doppler particle analyzer (PDPA) system. Water was used as paint surrogate for simplicity. The results show that the bell rotating speed is the most important influencing parameter for atomization processes. Liquid flow rate and shaping airflow rate significantly influence the spray structure. Based on the microscopic visualization, the atomization process occurs in ligament breakup mode, which is one of three atomization modes in rotating atomizer. In the spray transport zone, droplets tend to distribute according to size with the larger drops on the outer periphery of spray. In addition, the results of present study provide detailed information on the paint spray structure and transfer processes.

• The Plant Pathology Journal
• /
• v.24 no.1
• /
• pp.93-96
• /
• 2008

In August 2006, a severe disease incidence showing mosaic and/or necrotic symptoms on two bell pepper varieties including red-colored 'Special' and yellow-colored 'Fiesta' was observed in a greenhouse located in Gwangyang, Jeonnam province, Korea. To identify causal viruses, total RNAs were extracted from 11 fruit samples with and without symptoms. Specific oligonucleotide primers for Cucumber mosaic virus (CMV), Pepper mottle virus (PepMoV), Tomato spotted wilt virus (TSWV) and Pepper mild mottle virus (PMMoV) were designed based on the sequences available on GenBank. Database comparisons of the deduced amino acid sequences of each sequence produced 100% and 98% matches with nucleocapsid protein gene of TSWV (Acc. No. ABE11605) and coat protein gene of CMV (Acc. No. DQ018289), respectively, suggesting that the symptoms on bell pepper fruits might be caused by the infection of CMV and TSWV. To our knowledge this is the first report of necrotic as well as mosaic virus disease on bell pepper fruits by the infection of CMV and TSWV in Jeonnam province, Korea.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.415-419
• /
• 2014

A Cymbidium variety 'Snow Bell' (C. kanran ${\times}$ C. Jack Frost) was developed at the National Institute of Horticultural & Herbal Science, Rural Development Administration in 2011. A cross between C. kanran with small-sized greenish colored flowers and C. Jack Frost with bright pink colored flowers, was conducted in 1999. Based on flower color, leaf shape, flower stalk, and vigor one line was selected. Evaluation and selection trials were conducted from 2006 to 2010. 'Snow Bell' has a light pink sepal (RHS, R56D), red lip (R56A) and a leaf length of 47.5 cm. The average number of flowers on each peduncle is 13.8 and the flower diameter is 6.2 cm. The characteristics of petals and sepals show some incurve and some spreading. 'Snow Bell' has a vigorous growth and a round flower. It has an adequate peduncle height of 50.7 cm compared with leaf length of 47.5 cm, and start blooming in December. In electronic nose analysis, the degree of fragrance between 'Snow Bell' and the C. kanran was similar and both of them showed strong scents, although they had different fragrance patterns.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.461-465
• /
• 2011

Traditional magnetostrictive/piezoelectric laminate composites are generally in the regular geometries such as rectangles or disks. To explore properties of the irregular geometry magnetostrictive/piezoelectric transducer in the fundamental resonant frequency, a step dumb-bell shaped Magnetoelectric (ME) transducer is presented in this study. Both analytical and experimental investigations are carried out for the dumb-bell shaped transducer in the fundamental frequency. Comparing with the traditional rectangular transducer, the theory shows the resonant frequency of dumb-bell shaped transducer is reduced 31%, and the experiment gives the result of that is 37% which is independent of dc magnetic fields. The ratio of magnetoelectric voltage coefficient (MEVC) between the dumb-bell shaped and rectangular shaped transducers in theory is 66% comparing with that of in experiment is varying from 140% to 33% when the dc field is increased from 0 Oe to 118 Oe.