• 정보처리학회논문지C
• /
• 제11C권6호
• /
• pp.755-764
• /
• 2004

최근 자기띠 방식의 금융카드를 IC 카드로 대체하기 위해 현금카드를 위한 금융IC카드표준 규격, 신용카드를 위한 EMV 규격을 채택되어 관련 인프라 구축이 활발하게 전개되고 있는 상황이다. 본 논문에서는 공개키 암호를 채택하고 있는 EMV 규격을 분석함으로써 인터넷 PKI, WAP PKI 등에 비해 상대적으로 연구가 미진한 EMV 기반 Payment PKI에 대한 연구를 하고자 한다. 이와 함께 IC 카드 기반 전자결제 시스템 개발에 활용할 수 있는 EMV 기반 Payment PKI 모델을 제안하고, EMV CA 시스템을 개발하였다. 또한 이를 활용하여 EMV 규격에 정의된 IC 카드 인증메커니즘을 보완하여 IC 카드 메모리 낭비 감소, 거래 처리 시간 단축, 효율적인 운영환경 및 성능을 향상시킬 수 있는 "효율적인 IC 카드 인증메커니즘" 제안하고, 성능평가를 하였다.

• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.639-645
• /
• 2013

The aim of the study is to investigate the method to estimate a storage life of propelling charge on the decrease of muzzle velocity by stochastic gamma process model. It is required to establish criterion for state failure to estimate the storage life and it is defined in this paper as a muzzle velocity difference between reference value and maximum allowable standard deviation multiplied by 6. The relationship between storage time and muzzle velocity is investigated by nonlinear regression analysis. The stochastic gamma process model is used to estimated the state distribution and the life distribution for storage time for 155mm propelling charge KM4A2 because the regression analysis is a deterministic method and it can't describe the distribution of life for storage time.

• 대한인간공학회지
• /
• 제1권2호
• /
• pp.3-9
• /
• 1982

This study demonstrates that certain personal and task factors can be modelled to predict slip potential as well as back loadings durings dynamic pushing and pulling tasks. Such tasks are com- mon to many manual material handling jobs in industry and the results of this work will hopefully be of use in improved job design. The objective of this research is to formulate and validate a dynamic biomechanical model of pushing and pulling a cart. For pushing and pulling tasks, the model can : (1) estimate foot forces for given hand forces, and (2) estimate tors muscle and vertabral column loadings. In order to formulate and validate the model, experiments involving pushing and pulling of a cart were performed. These experiments produced data of the following type : (1) dynamic forces on the feet, (2) hand forces required to move the cart, (3) body motions as functions of various cart motion and (4) back muscle actions. The model was validated using three different methods; precision was tested using correlation between predicted and measured results, accuracy using standard error between of predicted and measured results, and intuitive comparison of predicted results using sensitivity analyses.

• 정보통신설비학회논문지
• /
• 제2권2호
• /
• pp.5-13
• /
• 2003

This paper suggests an environmental improvement scheme for the enactment and revision process of the standard of construction estimation in communication field. The first subject is a simplification of process on the enactment and revision. It can be achieved by transfer the function to the professional board from the subordinate council. The second process is an adoption of tentative step on enactment and revision. And the last subject is creation of maintenance part. All the improvement shall be carried on in long term schedule and on the sufficient financial support from government.

• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.133-140
• /
• 2016

건설공사에 있어 노무량은 건설공사비 산정을 위한 기준으로 사용되고 있고, 건설산업의 생산성을 파악하는 근거자료로도 활용되고 있다. 하지만 노무량의 기준이라고 하는 표준품셈과 실제투입 노무량과 큰 차이를 보이고 있어 이를 해결할 수 있는 방안이 필요하다. 따라서 본 연구에서는 실제투입 노무량을 좀 더 정확하고 간편하게 입력할 수 있는 시스템을 구축하기 위하여 전통적인 종이와 펜을 이용한 수기방식을 그대로 따르면서 전자문서화에 대한 이중부담이 없는 디지털펜을 이용하는 방안을 제시하고자 한다. 본 연구를 통해 실투입 작업정보를 단순히 저장하는 것뿐만 아니라 웹을 통한 공유 및 활용을 통해서 공사비 산정업무의 생산성 측면에서도 기여할 것으로 사료된다.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.4176-4184
• /
• 2015

건설사업 전 생애주기 중 설계단계에서의 대안별 비용 예측은 사업의 수익성 및 타당성 분석을 위한 판단기준이 된다. 설계도서가 완성되지 않은 초기 설계단계에서 과거의 유사자료를 바탕으로 개산견적이 실시되고 있다. 견적자의 경험과 산정방법에 따라 물량이 상이하고 누락되는 경우가 발생한다. 최근 IT기술 발전으로 BIM 기술이 주목을 받으면서 건설 전반에 걸쳐 기획, 설계, 시공, 유지관리 기술의 패러다임을 변화 시키고 있다. BIM을 활용한 다양한 연구가 시도되고 있지만, 활용 효과는 건설 사업의 기대에 미치지 못하고 있다. 본 연구에서는 국제 표준 IFC와 견적 관련 지식정보를 연계한 개산견적 프레임워크를 제안한다. 그 결과, 초기 설계단계에서 의사결정을 위한 공사비 예측을 수행하며, 그리고 선행연구의 한계점을 일부분 극복이 가능할 것으로 기대된다. 또한, 개산견적 프레임워크는 프로세스 일부를 자동화하였기 때문에 변경에 대한 능동적인 대처가 가능하다.

• Journal of the Korean Statistical Society
• /
• 제36권3호
• /
• pp.397-410
• /
• 2007

For the two groups data from multivariate binomial distribution, we consider a bootstrap approach to inferring the simultaneous confidence level and its standard error of a collection of the dependent confidence intervals for the difference of proportions with an experimentwise error rate at the a level are presented. The bootstrap method is used to estimate the simultaneous confidence probability for the difference of proportions.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.68-75
• /
• 2000

The incomplete penetration(IP) discontinuity in butt joint weld, which is detected during safety analysis of the steel bridge by nondestructive evaluation(NDE) method, is classified as unacceptable defect according to the NDE codes and standards. In fact, there are a little allowance in butt joint weld in the view point of design criterion, and also detected IP discontinuity should be classified and evaluated for the fatigue strength and residual life estimation. In this study, we performed fatigue test to evaluate the fatigue strength of high strength steel(SWS490A) containing IP discontinuities in various size, the results compared and classified according to the bridge construction standard specification which published by korea administration of construction and traffic. Experimental results could be used to evaluate and estimate the IP discontinuities considering different stress range in butt joint bridge weld during periodic safety inspection.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.471-474
• /
• 2005

Reliability-based durability model was developed to consider the uncertainty of analysis variables in durability model for harbor concrete structures. The durability analysis program based on Finite Element Method (FEM) was modified adopting the reliability concept to estimate the probability of durability failure. Water-cement ratio in the durability analysis is the most important factor influencing chloride diffusion coefficient, evaporable water, etc. The probability distribution of water-cement ratio was calculated converting standard deviations of compressive strength in Concrete Standard Code to those of water-cement ratio. Based on the Monte Carlo Simulation, the probabilities of penetration depth and durability failure were calculated.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.117-128
• /
• 2008

The purpose of this paper is to cultivate field of new distribution and it will set three detail aims and such aims will be propelled. First, investigates a present condition of domestic financial distribution, second, presents standard model of financial distribution, and third, confirms suitability of standard model on financial distribution for instance analysis. incidental purpose is to offer improvement method about corresponding instance through deduction of problem and estimate of analysis instance. The purpose of this paper is also to induce more strategic financial industry through research of related system such as LIS, CVO and TMS or through research of prior innovation contents by application to NONGHYUP for realization of financial distribution model.