• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.21-38
• /
• 2020

Currently, in-port emissions are a serious problem in port cities. However, emissions, especially non-greenhouse gases, from the operation of cargo handling equipment (CHE) have received significant attention from scientific circles. This study estimates the amount of emissions from on-land port diesel-powered CHE in the Port of Incheon. With real-time activity data provided by handling equipment operating companies, this research applies an activity-based approach to capture an up-to-date and reliable diesel-powered CHE emissions inventory during 2017. As a result, 105.6 tons of carbon monoxide (CO), 243.2 tons of nitrogen oxide (NOx), 0.005 tons of sulfur oxide (Sox), 22.8 tons of particulate matter (PM), 26.0 tons of volatile organic compounds (VOCs), and 0.2 tons of ammonia (NH3) were released from the landside CHE operation. CO and NOx emissions are the two primary air pollutants from the CHE operation in the Port of Incheon, contributing 87.71% of the total amount of emissions. Cranes, forklifts, tractors, and loaders are the four major sources of pollution in the Port of Incheon, contributing 84.79% of the total in-port CHE emissions. Backward diesel-powered machines equipped in these CHE are identified as a key cause of pollution. Therefore, this estimation emphasizes the significant contribution of diesel CHE to port air pollution and suggests the following green policies should be applied: (1) replacement of old diesel powered CHE by new liquefied natural gas and electric equipment; (2) the use of NOx reduction after-treatment technologies, such as selective catalytic reduction in local ports. In addition, a systematic official national emission inventory preparation method and consecutive annual in-port CHE emission inventories are recommended to compare and evaluate the effectiveness of green policies conducted in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.21-29
• /
• 2015

For higher reliability against component failures in railroad trains with many electronic sensors and actuators, a distributed control system with which all electronic components are connected via a network is being considered. This paper compares and analyzes various topologies of Ethernet network for a railroad train in the aspects of (1) failure recovery, (2) the number of ports per device, (3) the number of cable connections between vehicles, and (4) performance. Especially, the unique characteristic of a train system that the number of vehicles changes is considered through analysis. Various combinations of in- and inter-vehicle topologies are considered. In addition, we introduce a hybrid of star and daisy-chain topology for inter-vehicle connection when the maximum number of inter-vehicle connections is limited to reduce possible failures of inter-vehicle connections. Simulation results show performance comparison between different topology combinations; the hybrid topology is shown to enhance delay performance even with a highly limited number of inter-vehicle connections.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.201-206
• /
• 2018

The purpose of this study is to estimate a proper Domain Watch between anchored vessels in order to propose a method for the efficient management of VTS(Vessel Traffic Service) of the N-anchorage in Busan harbor, which is the largest port in Korea. For this purpose, we proposed the calculation method of Domain Watch and investigated the ship length(L), the distance between anchored vessels ($D_{ij}$), the domain radius(R), and the domain radius vs L(R/L) during the peak time of the vessels in the latest usage of anchorage. As a result of technical analysis for the surveyed data, the minimum R/L for securing the safety distance between anchored vessels was selected based on 2.85 corresponding to the 70th percentile of the total data. This result was applied to the N-anchorage of Busan and compared with the 'Guidelines of Port and Harbor Design(2014)', and we have confirmed that it is reasonable to set the Domain radius with the minimum 2.85L or more in VTS. This study considers the safety management of anchorage for VTS. This study could contribute to the safety of vessels using anchorage and the safety management plan of VTS when it is applied to other ports in operation such as it was in Busan.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.306-314
• /
• 2014

It has been known that cruise tourism adds value in the local industry and its impacts on regional economy are tremendous. From this point of view, identifying services provided by a cruise ship port, cruise tourists' satisfaction, and their behavioral intentions are significant issues at cruse destinations. The main purpose of this study was to identify significant service factors at the cruise ship port that have an influence on cruise tourists' satisfaction and loyalty in Jeju Island. To achieve the study purpose, a structured survey questionnaire was developed on the basis of reviewing related literatures. The survey was conducted through personal interviews at the Jeju Cruise Ship Port. In total, 386 useable samples were collected during the period from September 11 to October 29, 2012. According to the factor analysis using 15 attributes related to services at a cruise ship port, three service factors were extracted: (1) infra-services, (2) shore excursion services, and (3) attributes affecting the selection of shore excursions. Regression analyses indicated that two service factors(shore excursion services and attributes affecting the selection of shore excursions) significantly influence cruise tourists' satisfaction and loyalty. Findings in this study may be insightful and useful information to marketers or managers at cruise ship ports.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.64-72
• /
• 2008

Recently security is being an important issue in almost every field of industry. This situation has affected port logistics industry deeply. Ports are now leaving operational methods that only focus on productivity, and shifting to new ones which focus on safety and customer services on the basis of it. Thus a lot of companies and institutions have offered various solutions as this issue becomes more and more intense. Among them, most typical solutions involve installing special devices to ordinary containers to improve its security, such as CSD (Container Security Device) of GE (General Electric) and eSeal of Savi Networks. On the other hand, these devices focus only on international standards or technical implementation, and this causes inconvenience to actual users like cargo owners, sea carriers, or stevedoring companies. This is considered to be due to lack of sufficient consideration on user demands. This research uses QFD (Quality Function Deployment) method for deducting system requirements in order to solve the problems of previous security devices and to develop a security system that can not only reflect the demands of the users but also considers real-world conditions. According to the QFD results, a total of 21 system CTO's were deducted under 5 categories.

• Journal of Korea Port Economic Association
• /
• v.23 no.4
• /
• pp.71-90
• /
• 2007

To induce container cargos to Gunsan port, we should struggle on securing the quantity of goods transported from the competitive Jeonbuk and Chungcheong areas by reducing transportation expenses by land, and make an activating plan for the international exchange between Gunsan port and nearby ports in China. As a result, if the plan to induce container cargos to Gunsan port is activated, the regular liners will stop at Gusan port. So the new sea route will be opened so that consignors can ship cargos in the proper time. The consignors will use Gunsan port frequently because of the reduction of distribution expenses. To do so, for the first, many incentives should be implemented to attract container cargos. In addition, various facilities should be fully equipped and improved. This paper is to improve the problems for which consignors, the shipping lines and forwarders may feel uncomfortable when they use Gunsan port. According to the research on the actual condition, the biggest problem in Gunsan port is the depth of water. The management, relation system, infrastructure and information system of Gunsan port are also insufficient. Therefore, this paper will make an alternative plan to improve these problems and help the container cargos induce to Gunsan port.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.123-130
• /
• 2012

A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pump house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively an intake temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of $FLOW-3D^{(R)}$. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.83-104
• /
• 2012

The main purpose of tramp ships in shipping markets is to produce operation profits by minimizing the running days in a contract of the voyage charterparty. It is an especially difficult task for the owners to earn operation profits in the present recessional shipping market. Tramp ships are moving towards globalization in order to look for a variety of cargoes, which are distinguished from the liners operating regularly as per the fixed time schedule. Tramp shipping, therefore, requires special attention every voyage to secure operation efficiency which comes from minimized sea and laytime in port. The laytime is allowed by owners but if the charterers use more laytime than that which is incorporated in the charterparty, then a compensation known as 'demurrage' must be paid to owners. Conversely if the time is shorter this is called 'despatch' and in this case the owners are paid. As the laytime issue in the voyage charter is somewhat delicate, it often causes much disputes between charterers and owners during the cargo handling in ports. This study focuses on the charterers' right and duty on the laytime which is usually applied for the benefit of the charterers. Reference is also made to English law cases to reinforce this study and the conclusion will make relevant suggestions for further research.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.78-82
• /
• 2005

Fishermen have higher risk of occupational injuries and disease due to frequent machine usage and direct contact to live biological materials. Moreover, growing elderly workers makes the susceptibility to occupational injuries and disease higher. This study was performed to investigate the occupational safety and health status among fishermen. The interview was carried out at Jumunjin and Geojin ports which were representative port at North East side of Korea. The structured questionnaire were used to interview the fishermen from AM 6:00 to PM 11:00 and total respondent were 97 workers. The results were followed; 7 fishermen of all respondents experienced occupational injuries during their work, 5 fishermen were needed to admission longer than 4 days. The injury types were contusion(4 persons), fracture(1 persons) and amputation(2 persons). The cause of injury might be the lack of caution and the unstability of working condition. These results suggested the ergonomical evaluation of working condition and proper management. But there was limited concern and studies on the policy on occupational safety and health on fishermen. So, further study was required to establish the sound policy of fishermen's occupational safety and health.