• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.965-968
• /
• 2004

Now a day, the Korean National Railroad is taking new age with the opening of KTX (Korea Train Express). Korean National Railroad is planning using the GSM-r for put KTX and existing equipment to a good. GSM-R is radio communication method selected by ERTMS (European Rail Traffic Management System). So a new algorithm for train movement is necessary to radio communication form. This paper is come up with an algorithm for like that situation.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.13-25
• /
• 2016

High-speed railway (Korea Train Express) has had a deep impact on the regional economy of Korea. Current high-speed rail research is mostly theoretical, there is a lack of quantitative research using a precise algorithm to study the effect of high-speed railway on the regional economy. This paper analyses the influence of high-speed rail on the regional economy, with a focus on the Daegu area. Quantitative analysis using department store indexes and regional medical records is performed to calculate the economic influence of high-speed rail. The result shows that high-speed railway effects the regional economy though regional consumption growth and medical care trends.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1473-1478
• /
• 2008

In this paper, driving functions of the Korea Train Express (KTX) were decomposed based on systems engineering architecture for a preceding research of hazard identification and scenarios deduction of the KTX. Moreover, interfaces of the decomposed driving functions were analysed to figure out purposes of the driving functions.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.947-956
• /
• 2005

In this paper, I scrutinize what Korea has achieved from the KTX(Korea Train Express) project for the past one year of operation since it was open to public in April 2004 while looking into some improvement measures for better services in the future. I tried to compare the clements with those of the Tokaido Shinkasen in Japan. As things may turn at its premier operation, the KTX has been suffering from a small number of passengers, low in demand. However, when I compared the previous year with the post KTX operation of one year, demand of the passenger has increased $40\%$ on Kyong-bu line. I figured the first one year of the KTX operation pretty much followed in the footstep of the Tokaido Shinkansen's. For example, the rate of the each train to be on time as the timetable was equivalent while KTX went through less technical problems than the Tokaido Shinkansen. I have come up with some ideas for improvement, which I believe will lead to the development growth of KTX. First, I suggest that we complete the construction of laying new rails on Kyong-bu line at the earliest possible time. Second, we need to extend the high speed network as well as the rail modernization. Last, I have no doubt that we should secure high technology before we forge in the overseas markets.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1448-1450
• /
• 2004

Now a day, the Korean National Railroad is laking new agewith the opening of KTX (Korea Train Express). Korean National Railroad is planning using the GSM-r for put KTX and existing equipment to a good. GSM-R is radio communication method selected by ERTMS (European Rail Traffic Management System). So a new algorithm for train movement is necessary to radio communication form. This paper is come up with an algorithm for like that situation.

• International Journal of Railway
• /
• v.2 no.2
• /
• pp.93-97
• /
• 2009

The experiments for aerodynamic characteristics of railway acoustic screen are performed using 1/61 scaled-down moving model rig facility which employs an axis symmetry and one wire guidance method. The launching mechanism is an air-gun type. The train model for the experiment is the high speed train (Korea Train Express: KTX) and the tested speed is about 300 km/h. The tested train length is 61 em which is corresponding to two units of KTX train. The cross sectional area and weight of train model are 0.00264 $m^2$ and 287 g, respectively. The Reynolds number based on the model train length is $1.2{\times}10^7$. The strength of pressure wave is measured using piezo typed pressure sensor. The measured pick value of pressure was as high as 365 Pa in the shortest gap between the acoustic screen and model train. The measured pressure is well compared with the field test data of mc 779-1 [2] values. However, the experimental data were slightly lower than the mc 779-1 values. The results show the model test can be used as a substitute for the field test.

• Journal of Korea Multimedia Society
• /
• v.23 no.1
• /
• pp.43-49
• /
• 2020

Along side with the rapid growth of local governments' advertising bills, there are few studies focused on the effectiveness of these ads. Especially one of the media being used by the local governments is the Korea Express Train (KTX), where they advertise in the train coaches' KTX video monitor. Unfortunately the ads in KTX are exposed without audio mostly. The current study, therefore, probed on the effectiveness of these ads. This study utilized transportation theory and content analysis methodology to give insight to its discourse. We established two analysis units (camera and subtitles), and then analyzed 107 local government ads. From the camera analysis, it is observed that local governments' festival and tour promotion ads more often employ dynamic angles such as drone shot and long shot. Also, from subtitles usage analysis, it is observed that many of the ads make use of large size titles and subtitles which could prevent viewers seeing visual shots. In the special case audio-less KTX ads, this study recommends emphasis on subtitles which will enhance the ad effectiveness of the ad messages.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.341-344
• /
• 2005

High-speed trains with maximum speed of 300km/h, named KTX, have started revenue services since April 2004. Because of the geographical features of Korea a large portion of the 'Kyung-Bu' line is comprised of tunnels, which may cause excessive noise in a vehicle. The KTX interior noise follows in tunnel structure and the place where the quality appears different, the quality against hereupon from the commerce vehicle from the research which it sees it executes and comparison to analyze.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1001-1006
• /
• 2004

The concurrent engineering technologies have been broadly used in the field of the design, testing, manufacturing and maintenance works to reduce development time and costs. For this purpose, many design environments with the product data management system, the virtual engineering system and web database system are developed. In this research, we developed the driving simulator of the KTX(Korea Train Express) as a basic study for building the concurrent engineering design environment of rolling stock. The virtual track was developed from the Seoul to the Busan and the Daejeon to Mockpo to generate immersible driving environment. Also, fault generation systems were developed to educate drivers of the KTX. We expect to reduce the time and costs of newly developed rolling stock using the design environment developed in the research.

• Journal of the Korean Society for Railway
• /
• v.8 no.5
• /
• pp.470-476
• /
• 2005

RCM developed by American air industry in early 1960, its process is most realistic for some physical assets and it permits the system to maintain given function status through decision of demand about optimum maintenance. Therefore, many industries have selected RCM technique and have carried out RCM in order to solve many problems concerning maintenance management as improvement of reliability and availability of facilities, removal of hazard element about break down and retrenchment of maintenance cost. Through the execution of RCM, we can solve actual problems. And finally we will be able to develop more and more maintenance activities with RCM notion. In this study, we will consider the application of KTX-RCM which is set up with basic theory of RCM and constructed to improve vehicle safety, availability and regularity of KTX, linking with CMMS(Computerized Maintenance Management System).