• 대한수학회지
• /
• 제37권2호
• /
• pp.269-284
• /
• 2000

We discuss completeness with respect to the Caratheodory distance, the Kobayashi distance and the Beraman distance, respectively.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.343-343
• /
• 2006

Surface-initiated atom transfer radical polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) was carried out to produce high-density poly(MPC) brush on silicon wafer. Frictional properties of poly(MPC) was investigated by by sliding a glass ball (${\phi}\;10\;nm$) on the substrates over a distance of 20 mm at a sliding velocity of 90 mm/min under loading of 0.49 N at 298 K. Higher friction coefficients were observed in dry N2 atmosphere and in toluene condition, whereas the friction coefficients decreased to 0.02 in humid air and in water. It is supposed that water-swollen poly(MPC) brush works as a lubricant to moderate the interaction between brush and probe.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.6-13
• /
• 2001

A new GA-3D-PTV technique has been constructed to measure an impinging jet. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. GA (Genetic Algorithm) was used based on one-to-one correspondences in order to take advantage of the combinatorial optimization in tracking the pairs of the whole particles of the two images having a time interval. Two fitness functions were introduced in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The constructed GA-3D-PTV system was applied in success to the measurement of flow characteristics of the impinging jet.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.43-44
• /
• 2002

A pulsed jet was measured with high-definition 3D-PTV technique. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. Two fitness functions were introduced in a genetic algorithm in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The head vortex of the jet was visualized by LIF and was reconstructed by the constructed high-resolution 30-PTV system for comparisons.

• Industrial Engineering and Management Systems
• /
• 제12권4호
• /
• pp.351-358
• /
• 2013

This paper proposes a multiobjective model describing the trade-offs involved in selecting the locations of drop-off boxes for collecting used products and transporting these products to designated locations. We assume the following reverse flow of used products. Owners of used products (cellular phones, digital cameras, ink cartridges, etc.) take them to the nearest drop-off box when the distance is reasonably short. We also assume that owners living closer to drop-off boxes dispose of more used products than do owners living farther from drop-off boxes. Different types of used products are collected, with each type requiring its own drop-off box. A transportation destination for each product is specified. Three objectives are considered: maximizing the volume of used products collected at drop-off boxes; minimizing the cost of transporting collected products to designated locations; and minimizing the cost of allocating space for drop-off boxes. We formulate the above model as a multiobjective integer programming problem and generate the corresponding set of Pareto optimal solutions. We apply the model to an area using population data for Chofu City, Tokyo, Japan, and analyze the trade-offs between the objectives.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.877-881
• /
• 2005

In this paper, a novel method for analyzing a textile fabric structure is proposed to segment each yarn of the textile fabric from voxel data made out of its X-ray computed tomography (CT) images. In order to segment the each yarn, directions of fibers, of which yarn consists, are firstly estimated by correlating the voxel with a fiber model. Second, each fiber is reconstructed by clustering the voxel of the fiber using the estimated fiber direction as a similarity. Then, each yarn is reconstructed by clustering the reconstructed fibers using a distance which is newly defined as a dissimilarity. Consequently, each yarn of the textile fabric is segmented from the voxel data. The effectiveness of the proposed method is confirmed by experimentally applying the method to voxel data of a sample plain woven fabric, which is made of polyester two folded yarn. The each two folded yarn is correctly segmented by the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1781-1786
• /
• 2005

In sensor network systems, all the nodes are interconnected and the positional information of each sensor is essential. To measure the temperature, position detection and communication functions are required. Many sensor nodes are distributed to a measurement field, and these sensors have three main functions: they measure the distance to the other nodes, the data of which are used to determine the position of each node; they communicate with other nodes; and they measure the temperature of each node. A novel range measurement method using the difference between light and sound propagation speed is proposed. The experimental results show the temperature distribution as measured with the aid of the determined positions. The positions of every node were calculated with a PC program. Eight nodes were manufactured and their fundamental functions were tested. The results of the range measurement method, which takes relatively accurate measurements, contribute significantly to the accuracy of the position determination. Future studies will focus on 3-D position determination and on the architecture of appropriate sensors and actuators.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.59-64
• /
• 2002

Effects of the aging treatments on the microstructure and strength of heat affected zone(HAZ) in the welds of a age-hardened Al-Mg-Si alloy, 5N01-T5, were investigated. The base metal aging treatments before MIG welding were conducted at 423K to 473K for 28.8ks Post weld heat treatment(PWHT) to recover the HAZ strength was performed at 448K for 28.8ks. Microstructure observations, hardness measurements and tensile tests were conducted to study properties of the MIG weld joints. The position of the softest region in HAZ where the hardness insufficiently recovered after natural aging and PWHT was at a distance of approximately 15mm from the center of the fusion zone. Hardness of the softest regions after natural aging and PWHT decreased with increase in the base metal aging temperature. TEM observation clarified that strengthening ${\beta}$"(Mg$_2$Si) precipitates and coarse ${\beta}$′ precipitates affected the hardnes of HAZ. Incomplete recover of hardness in HAZ after PWHT was caused by the precipitating of non-hardening ${\beta}$′ phase during the weld thermal cycle. In order to examine the effects of weldheat input and welding speed, the laser weld joints were also investigated and compared with the MIG weld ones. Laser welding had the narrower width of the softened regions in HAZ compared with MIG welding. The hardness of the softest regions of the laser welds after PWHT was higher than that of the MIG welds. Quantitative relations between hardness of the softest region and base metal aging temperature were obtained for both welding processes. Accordingly, the equations to estimate the strength of the weld joints after PWHT with varying base metal temperatures were proposed for MIG welding and laser welding.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권10호
• /
• pp.1369-1378
• /
• 2006

This is the first study in which genetic variability and relationships of a large number of Japanese chicken breeds were revealed along with those of several foreign breeds by using microsatellite DNA polymorphisms. Twenty-eight breeds (34 populations) of native Japanese chickens and seven foreign breeds or varieties were analyzed. The mean number of alleles per locus, the proportion of the polymorphic loci, and the expected average heterozygosity ranged from 1.75 to 4.70, from 0.55 to 1.00, and from 0.21 to 0.67, respectively. Microsatellite alleles being unique to a particular population were detected in some populations. The $D_A$ genetic distance between populations was obtained from allele frequency for every pair of the populations to construct a neighbor-joining tree. According to the phylogenetic tree, excluding a few exceptions, native Japanese chicken breeds and foreign breeds were clearly separated from each other. Furthermore, the tree topology divided native Japanese chickens into four main classes, which was almost in accordance with the classification based on body morphology; that is, (1) Cochin type, (2) Malay type, (3) layer type, and (4) intermediate type between Malay and layer types. This is the first finding for native Japanese chickens.

• 대한원격탐사학회지
• /
• 제33권3호
• /
• pp.313-324
• /
• 2017

미래 인류의 달 기지 설치 후보인 달 용암 동굴은 지형 카메라의 관측 자료를 통해 탐사가 수행되었지만 이는 달 용암 동굴의 존재에 대한 확실한 증거를 제시하지 못한다. 본 연구에서는 지표 투과가 가능한 High Frequency (HF) 레이더의 달 관측 자료를 이용하여 달 용암 동굴 탐사를 시도하였다. 이를 위해 일본 달 탐사선 Kaguya의 Lunar Radar Sounder (LRS)의 관측 자료에서 LRS에서 가장 강한 반사파 펄스가 나발생되는 지점까지의 거리인 LRS 표면 레인지가 추출되었다. 달 용암 동굴은 얕은 지하에 분포하고 LRS의 거리 분해능은 얕은 지하에 있는 목표물의 반사파와 표면 반사파는 분리 할 수 없다. 이로 인하여 달 얕은 지하에 구조물이 있는 경우 일반적인 달 표면의 위치가 실제 달 표면과 다르게 나타난다. 이에 따라 LRS 펄스의 낮은 거리 분해능을 이용하여 LRS 표면 레인지로부터 얕은 지하에 존재하는 달 용암 동굴 검출이 가능하다. LRS 표면 레인지에서 Kaguya의 궤도 고도를 제하면 달 표면 고도가 나타나고 이를 달 지형 고도를 나타내는 Kaguya Digital Terrain Model (DTM) 데이터로부터 도출된 DTM 평균 지형 고도와 비교 분석하여 달 용암 동굴을 검출한다. 이러한 분석 방법을 Rima Galilaei의 북쪽에 위치한 달 용암 동굴 후보지에 적용하여 LRS 지형 고도 값과 DTM 평균 지형 고도 값의 차이를 발견하였고 검출된 차이가 천부 지하에 존재하는 달 용암 동굴의 반사파로 인하여 생긴 것으로 추정하였다.