• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.629-634
• /
• 2012

Knitted fabric using acrylic/wool blended yarn (A/W) is increasingly used in the knit industry; subsequently, research on knitted fabric using A/W has increased. This study presents an scientific database from evaluating physical properties of $1{\times}1$ rib stitch using A/W. In this study,$1{\times}1$ rib stitch using A/W were made at various knitting tensions (dial no. 2-6) and the number (4-6) of ply yarn. The physical properties of $1{\times}1$ rib stitch using A/W were measured and analyzed. The density was in the range 5.5-6.4 wales/cm and 4.0-5.6 courses/cm, respectively. The density increased when less plying yarns and more knitting tension were added during knitting. The thickness was in the range of 1.592-2.362 mm and the tensile strength was in the range 32.75-53.63 Kgf/mm. The burst strength was in the range 107.8-139.2 $N/cm^2$. Thickness, tensile strength, and burst strength increased as the number of ply yarn and the knitting tension increased. The elongation and the recovery extension rate were in the range 102.29-112.13% and 96.4-97.7%, respectively. The heat retention rate was in the range 59.3-65.1%. There was no difference of the elongation and the recovery extension rate and the heat retention rate by the knitting tension and the number of the ply yarn. The permeability was in the range 170.5-396.3 $cm^3/cm^2/sec$. Air permeability decreased as the number of ply yarn and the knitting tension increased. The pilling properties were excellent for all $1{\times}1$ rib stitches.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.85-102
• /
• 1999

The purpose of this study is reviewing and researching the origins of knitwear the history of patterned knits. Aithough historians know little about the origins of knitting many believe it was practiced as early as the 4th century by nomads roaming North Africa. later Arab raders adopted the craft which helped then while away the hours as they traveled across deserts in camel carabans, Its origins lie in the need for close-fitting and elasticated covering for the body in particular the head hand and feet. it first developed in the Mediterranean countries and later in Central and particularly Northern Europe. Early evidence of multicolored knitting is said to date back to the Egyptian Copts of 600-800 A.D. medieval knitting is developed through the Church and monastery. The increasing demand for knitted products already observable in the fourteenth and fifteenth centries and the number of preserved knitted articles increases inexcavated materialos from Europe. The improvements in technique stimulated the developement of the hand knitting industry in the early sixteenth century. The best-known source of production is the guild organization and their mass production consisted of the carpets cushion coverings and other small items for furnishing interiors but mainly of clothing. The demand for knitted goods was such that in the late sixteenth century it was mechanised, The knitting frame invented in 1589 by William Lee English priest was the most perfect machine of this period. The mass production of fully-fashioned and seamless garments in the late nineteenth and twentieth century was dangerously competitve to traditionally woven and sewn cloth in. As fashions changed knitwear has had an almost continuous ruse in public favour and the popularity of sports has encourage the fashion for flexible easy-fitting and absorbent garments.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.19-25
• /
• 2021

This study contains the results obtained after two and a half years of developing a knitting customization website using a knitting machine. Recently in the fashion world, various services using customization are being provided, and devices that users can design directly using knitting machines are being developed. However the existing website for knitting machine does not provide a certain usability or layout, so it is difficult for users to use open source and custom design. Therefore, this study was conducted for the purpose of developing a website that provides ease of use to users who will use the knitting customizing service using a knitting machine. As a research method, the first usability evaluation was conducted by synthesizing the studies conducted for the knit customization website development work. As a result of the study, found the problems of the initial custom screen and the initial output screen were found, and convenience, intuition, and readability were improved. Secondary usability evaluation was conducted on the modified website and it was confirmed that the problem was corrected. Through the website finally derived from this study, it is expected that the new platform in the domestic knit market will be popularized and the usability of the custom website will be improved.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.630-643
• /
• 2020

Recently, consumers have changed their role to consumers and producers who make what they want. The way clothes are produced is also needed to change according to modern consumption methods. Knitting Machine was one of them, and although it was a mass-produced device, it developed a device that could make clothes anywhere on a small production craze. Knit-making requires more consideration than other clothing designs, which requires consideration of users' web usability. Therefore, this study proposes an assessment tool that can evaluate web usability of clothing-making sites using knitting machines. To this end, the examples of the Knitting Machine program and custom product production websites and the each UI were investigated and analyzed. Based on these prior surveys, the draft evaluation items were drawn, and three Delphi surveys were conducted on the basis of the draft to produce assessment tools after classifying, modifying and deleting items. Through this study, we look forward to improving the usability of the customized product-making website of Knitting Machine in the future and popularizing the Knitting Machine.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.1059-1067
• /
• 2009

The knitting method of the sleeves for improving movement adaptability were studied in this paper. The purpose of this study is proposing a knitting method that is suitable for the bodies of women in their 20's and can enhance wearing satisfaction. To see the effect of the bind-off length at the axilla, a movement adaptability test was undertaken for 4 samples that have bind-off at bodices. In addition to that, the analysis of their sliding distance with respect to the human motions were executed. The results of this study were listed below. Its result was that the samples with small bind-off lengths represent better wearing satisfaction than the samples which have large bind-off lengths. The comparison of the sliding distances at the hem, waist and sleeves with respect to the tester's motions also shows that the sample having small bind-off makes better result than the sample with large bind-off. It was observed that the optimal length of bind-off was 2cm for the improvement of the sleeve functionality.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.425-431
• /
• 2008

The purpose of this study was to observe the changes of skirt length of knitted flare skirts when the seamless test garments were made which had been having full shape while being knitted and to change and amend the challenges in advance when those were knitted. For this study, I made 6 kinds of knitted test garments of wool 100% yarn with seamless knitting machine, which differed from each other by skirt angles ($90^{\circ},\;180^{\circ}$) and gauges (7G, 12G, 15G), and then I measured deflection changes of their length for 2 weeks. Findings and conclusions drawn from this study were as follows: First, the side seam line of full shape hecame somewhat longer than center. Second, 7G and $180^{\circ}$ knitted flare skirt showed the biggest length deflection changes. Third, there was no difference at rear waist deflection changes between front pattern and rear. Fourth, it was difficult to control the tensions of right and left strings as to the knitting directions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.113-125
• /
• 2012

This study, as one on the neck design of seamless knitwears, set out to make experimental clothes applying various knitting methods to the hem of round neck, seek the knitting methods of finishing touches on the ending part of round neck to enhance function and aesthetic appreciation through measuring tensile strength and assessing wearing sensation, and provide basic data that would be of practical help to developing the design of seamless knitwears and mass production in the national knit industry. The ending part of neck of the seamless knitwear is not only the last stage in making knitwear but also affects the function and appearance of the clothes. The investigator, thus made six different pieces of experimental clothes according to the finishing methods of knitting on the neck, then measured tensile strength and put them to the test by a group of experts for the assessment of wearing sensation. The results were analyzed based on variance analysis(ANOVA), and the items with similar results were put to the Duncan test for intergroup comparison. According to the analysis results of measuring tensile strength, Experimental Clothes B received the highest evaluation, Experimental Clothes E the lowest. Also Experimental Clothes B was ranked the highest in almost every evaluation criteria, whereas Experimental Clothes E was ranked the lowest in the assessment of wearing sensation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.4
• /
• pp.57-71
• /
• 2021

The purpose of the study is to derive an appropriate knitting method that can increase the appearance, wearability, and functionality through empirical research on the sleeve height knitting ratio of seamless knit wear. The study was conducted by producing seven types of experiment clothes according to knitting ratio to examine the characteristics according to the body armhole and sleeve height ratio. Specifically, after fit evaluatins, variance analysis (ANOVA) was performed to analyze the results of the evaluation, and the evaluated contents were converted into data. Among them, the items with significant results were intensively studied using the Duncan-test. The result showed that the height and the width of the sleeves vary depending on the knitting ratio. Test sweater A was the highest at 16cm, followed by test sweater B, test sweater C, test sweater D, test sweater E, test sweater F, and test sweater G at 4cm. The 1:1 ratio of test sweater A, was the highest, which is knitted in the same course as the body. The larger the difference in the ratio of body and sleeve, the lower the height of the sleeves. As a result of the appearance sensory evaluation, a significant difference was confirmed in the result values (p<0.001) from all items on the front, side, and rear. Specifically, the appearance of the test sweater B(2:4:2) on the front and test sweater C(2:4:3) on the side and rear side was the best. When the sleeves height is properly set, the ratio of the arm line to fit the design with a natural curve is analyzed as a very important factor. The results of this study are expected to be of practical use in product development and production that can increase the feeling when wearing and design satisfaction.

• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.148-152
• /
• 2001

Cotton yarns were coated with a polymer solution to hold surface fibers to the yam body, which caused fiber-fly generation during knitting process. The physical property of the coated yarn, especially a bending rigidity was investigated in order to evaluate the performance of the coated yam during knitting. SEM images showing the surface condition of the coated yarn demonstrated that the thickness of a coating material increased as the concentration of the coating solution increased. The results of the bending rigidity measured using KES-FB2 system showed that the bending rigidity of the coated yam increased as the concentration of the coating solution increased. The results also revealed the possibility that yarn coated with a low amount of coating material should be employed for further research of reducing fiber-fly generation during knitting process.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.77-86
• /
• 2004

The purpose of this study is to characterize physical and tensile properties according to a knitting method as basic materials for solving the difficulties that occur due to the fact that the crosswise elongation is most different among knit stitch at the time of measuring elongation of knitwear. The sample used for this study was wool $100\%$ and was knitted into two, that is, controlled loop length controlled to properties of structure and fixed loop length by using Shimaseiki SES-124S 12G computer automatic flat knitting machine with DSCS device. Also, the density of rib fabric was 12gauge and its quantity was a total of seven of $0{\times}0,\;1{\times}1,\;2{\times}1,\;2{\times}2,\;3{\times}3,\;4{\times}4$ and including plain fabric, and knitted 2 pieces of sample of 300 wale${\times}400$ course. In conclusion, rib stitch has the much higher stretch rate in the direction of the course than other stitches.