• 대한의용생체공학회:의공학회지
• /
• 제22권4호
• /
• pp.359-368
• /
• 2001

A new knee-ankle-foot-orthosis(KAFO) which uses an automatically-controlled electromechanical wrap spring clutch for the knee joint was developed in the present study. It was found that the output voltage from the foot switches of the developed KAFO was proportionally increased with respect to the applied load. The output voltage from the infrared sensor also decreased as the knee flexion angle increased. The knee joint system for the new KAFO weighs only 780g lighter than any other commercially available developed system. In addition, the solenoid reduces the reaction time for the automatic control of the knee joint. The static torque of the clutch was measured for three persons, and it satisfied the normal knee extension moment during the pre-swing. Three-dimensional gait analyses for three different gait patterns (normal gait, locked-knee gait, controlled-knee gait) from five normal subjects were conducted. Controlled-knee gait showed the maximum knee flexion angle of 40.56$\pm9.55^{\circ}$ and the maximum knee flexion moment of 0.20$\pm$0.07Nm/kg at similar periods in the normal gait. Our KAFO system satisfies both stability during stance phase and free knee flexion during the swing phase at the proper period during the gait cycle. Therefore, our KAFO system would be very useful in various low extremity orthotic applications.

• 한국운동역학회지
• /
• 제18권2호
• /
• pp.75-83
• /
• 2008

본 연구의 목적은 보행 속도의 차이에 따른 최대 관절 모멘트와 최대 모멘트 발생 시점의 관절 각도 상관관계를 규명하는데 있다. 8명의 $20{\sim}30$대 남성을 대상으로 보행 속도의 3가지 단계(1.5m/s, 1.8m/s, 2.1m/s)를 나누어 속도에 따른 보행을 실시하여 얻어진 결론은 다음과 같다. 1. 보행 속도가 증가함에 따라 무릎 최대 신전 모멘트는 증가하였고, 굴곡, 외전 모멘트는 큰 영향을 받지 않았다. 2. 최대 신전 모멘트가 발생하는 시점의 무릎 관절 각도는 굴곡의 움직임이 커졌으나, 다른 무릎 관절 각도에는 변화가 없었다. 3. 힙 최대 신전, 굴곡, 외전 모멘트는 증가하였다. 4. 최대 굴곡과 신전 모멘트가 발생하는 시점의 힙 관절 각도의 신전과 굴곡의 증가 현상을 보였으나, 최대 외전 모멘트가 발생하는 시점의 무릎 관절 각도에는 변화가 없었다. 5. 무릎 최대 신전, 굴곡, 외전 모멘트와 무릎 관절 각도를 least square method를 이용하여 적합도 검사를 실시한 결과 R2값이 높게 나타나 상관관계의 설명력이 높았다. 이렇게 근사된 곡선의 근사식은 보행 속도에 따른 무릎 관절의 평가 자료로 이용될 것으로 기대된다.

• 대한물리치료과학회지
• /
• 제10권2호
• /
• pp.53-61
• /
• 2003

The purposes of this study were to describe and compare pint moments according to 6 types of gait methods during free speed. 15 volunteers(7 male, 8 female: mean age = 23.33 yrs.) participated and performed 6 types of gait methods. From the 3 types of pint moments of lower extremities(hip, knee, ankle and foot), the following results were made: 1. In left hip pint, the flexion-extension moment was not significantly different, but the adduction-abduction moment and rotation moment were showed different curves during stance phase. 2. In left knee pint, the flexion-extension moment was not significantly different, but the varus-valgus moment and rotation moment were showed different curves during stance phase. 3. In left ankle and foot the dorsiflexion-plantarflexion moment was not significantly different but the varus-valgus moment and rotation moment were showed different curves during stance phase. In conclusion, because weight loading gait with 10-20% of body weight were normal gait patterns, It was inferred that all weight loading gaits did not indicate noxious reactions of human body.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.25-34
• /
• 2012

The purpose of this study was to determine the effects of landing height on the lower extremity during a counter movement jump. Fourteen healthy male subjects (age: $27.00{\pm}2.94$ yr, height: $179.07{\pm}5.03$ cm, weight: $78.79{\pm}6.70$ kg) participated in this study. Each subject randomly performed three single-leg jumps after s single-leg drop landing (counter movement jump) on a force platform from a 20 cm and 30 cm platform. Paired t-test (SPSS 18.0; SPSS Inc., Chicago, IL) was performed to determine the difference in kinematics and kinetics according to the height. All significance levels were set at p<.05. The results were as follows. First, ankle and knee joint angles in the sagittal plane increased in response to increasing landing height. Second, ankle and knee joint angles in the frontal plane increased in response to increasing landing height. Third, there were no significant differences in the moment of each segment in the sagittal plane for the jumping height increment. Fourth, ankle eversion moment and knee valgus moment decreased but hip abduction moment increased for the jumping height increment. Fifth, Ankle and knee joint powers increased. In percentage contribution, the ankle joint increased but the knee and hip joints decreased at a greater height. Lastly, as jumping height increased, the power generation at the ankle joint increased. Our findings indicate that the height increment affect on the landing mechanism the might augment loads at the ankle and knee joints.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.89-98
• /
• 2007

The purpose of this study was to evaluate the trunk motion and knee joint moment during deep stand to sit and sit to stand according to the trunk weight increase. These experimental subjects were 9 males, who had no skeletal muscular disease. They were performed a SATS(stand to sit), STS(sit to stand) according to the trunk weight increase. Trunk weight increase were classified into 4 bearing trunk weight of 0%, 8%, 16%, 24% of the subject' weight. 1-way(4) RM ANOVA is applied to get the difference of trunk displacement movements and knee joint moments according to he trunk weight increase. significant level of each experiment is set as $\alpha$=.05. 1. Significant difference was classified into 3 bearing trunk weight of 0%, 16%, 24% in maximum forward backward displacement of trunk COM(center of mass). Significant difference was classified into 4 bearing trunk weight of 0%, 8%, 16%, 24% in maximum upward downward displacement of trunk COM during the SATS, STS. 2. Significant difference was classified into 4 bearing trunk weight of 0%, 8%, 16%, 24% in maximum extension knee joint moment. Significant difference was classified into 2 bearing trunk weight of 0%, 16% in maximum internal rotation knee joint moment during the SATS, STS. Therefore we expect that biomechanical model of this study will used to study for mechanical characteristics of obese people.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.107-118
• /
• 2008

In this study, lower extremity joint kinematics and kinetics and lumbar lordosis were investigated for two different symmetrical lifting techniques(squat and stoop) using the three-dimensional motion analysis. Twenty-six male volunteers lifted boxes weighing 5, 10 and 15kg by both squat and stoop lifting techniques. There were not significant differences in maximum lumbar joint moments between the two techniques. The hip and ankle contributed the most part of the support moments during squat lifting, and the knee flexion moment played an important role in stoop lifting. The hip, ankle and lumbar joints generated power and only the khee joint absorbed power in the squat lifting. The knee and ankle joints absorbed power, the hip and lumbar joints generated power in the stoop lifting. The bi-articular antagonist muscles' co-contraction around the knee joint during the squat lifting and the eccentric co-contraction of the gastrocnemius and semitendinosus were found to be important for straightening up during the stoop lifting. At the time of lordotic curvature appearance in the squat lifting, there were significant correlations in all three lower extremity joint moments with the lumbar joint. Differently, only the hip moment had significant correlation with the lumbar joint in the stoop lifting. In conclusion, the knee extension which is prominent kinematics during the squat tilling was produced by the contributions of the kinetic factors from the hip and ankle joints(extensor moment and power generation) and the lumbar extension which is prominent kinematics during the stoop lifting could be produced by the contributions of the knee joint kinetic factors(flexor moment, power absorption, bi-articular muscle function).

• The Journal of Korean Physical Therapy
• /
• 제28권1호
• /
• pp.14-21
• /
• 2016

Purpose: The purpose of this study was to investigate examine how the kinematics and kinetics of lower limb joints were changed depending on the unstable shoes (US) during sit-to-stand task (SitTS). Methods: Nineteen healthy females were participated in this study. The subjects performed sit-to-stand task with US and barefoot. The experiment was repeated three times for each tasks with conditions. The kinematics and kinetics of lower limb joint were measured and analyzed using a 3-D motion analysis system. A paired t-test was utilised performed for to identificationy of changes in mean of angle, force, and moment between both the two conditions. Results: The results of this study showed kinematic differences in lower limb joints during SitTS based on the US. The hip, knee, and ankle angle showed statistically significant differences during SitTS. At the initial of SitTS, Tthe force and moment of the hip flexor, hip extensor, knee flexor, knee extensor, ankle flexor, and ankle extensor showed statistically significant differences. At the terminal of SitTS, Tthe force and moment of the hip flexor, hip extensor, knee flexor, knee extensor, ankle flexor, and ankle extensor showed statistically significant differences. At the maximum of SitTS, Tthe moment of the hip extensor showed statistically significant differences. The force and moment of the ankle flexor, extensor moment showed statistically significant differences. Conclusion: Therefore, Wwearing US is considered to influence on the lower limb joints kinematics and kinetics during SitTS movements, and thus suggests the possibility that of reducing the risks of pain, and osteoarthritis caused by changes in the loading of lower limb joints.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.133-144
• /
• 2004

The purpose of this study was to analyze the joint moment on lower extremity during a developpe devant. Data were collected by Kwon3D, KwonGRF program. Two professional modem female dancers were participated in this experiment. Subjects performed a developpe devant in meddle heights. On the axes of X, Y, Z, it was shown that the maximum joint moment was occurred in hip joint. The moments are plotted during developpe devant. The ankle muscles generate a plantar flexion moment and the knee muscles generate a flexion moment and The hip muscles generate a extension moment. So these muscles of joint muscles were known to play a key role in keeping the body balance while doing developpe devant. In addition adduction moment occurred at hip, knee, an ankle in the order of amount, we could assume from this data that him out motion started from the hip joint. There was small active turn out possible below the hip joint. A small amount of extra turn out could be obtained when standing because of flexion between the foot and floor, which could be used to give a passive external rotation force to the whole leg and this could produce a rotation between the knee and foot. This passive external rotation could produce very damaging results. Therefore, lower extremity joint muscles such as hip, knee, and ankle muscle should be trained to keep the body balance and prevent injury during developpe devant performance. And for the safe and perfect turn ort performance, hip joint abduction, the most important external rotating muscle for him out is needed to train and full stretching should be done in advance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1151-1152
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2009