• 한국운동역학회지
• /
• 제17권3호
• /
• pp.23-29
• /
• 2007

The purpose of this study were to investigate the differences between female and male basketball players in knee neuromuscular biomechanical factors during basketball rebound jump. Twelve high school female ($17.9{\pm}0.8years$) and twelve male ($19.0{\pm}1.6years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament. Kinematic and ground reaction data were collected and combined with inverse dynamics to estimate the knee extensor and abductor torque. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes showed more reduced knee flexion at foot contact, more increased knee abduction, extensor and abductor knee joint torque at foot contact, and quadriceps ratio at stance phase than those of male athletes. In conclusion, Female athletes showed differences in knee neuromuscular biomechanical factors than male athletes during basketball rebound jump.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.281-286
• /
• 2020

Objective: This study examined the effects of dynamic tape applied to the patellofemoral joint on the knee valgus angle, muscle activity, and ground reaction force during a single leg squat (SLS) and single leg landing (SLL). Design: Cross-sectional study. Methods: Twenty-four subjects (11 male, 13 female) who met the inclusion criteria were screened by the knee palpation and patella compression tests. First, the knee valgus angle and muscle activity during SLS were measured. Second, the knee valgus angle and ground reaction force during SLL were measured. For the intervention, a patella joint loop using dynamic tape was used. The knee valgus angle, muscle activities in SLS and SLL after the intervention, and the ground reaction force were measured in the same way. A paired t-test was used to examine the difference between before and after the intervention. Results: The knee valgus angle showed a statistically significant improvement after dynamic taping application in SLS and SLL (p<0.05). The differences in muscle activity of the VL/VMO and ground reaction forces were not statistically significant after dynamic taping application in SLS and SLL. Conclusions: This study showed that dynamic taping applied around the patellofemoral joint was effective in improving the knee valgus angle in SLS and SLL and had a reduced risk of secondary injury during sports activity.

• 대한물리치료과학회지
• /
• 제28권1호
• /
• pp.76-84
• /
• 2021

Background: In clinical practice, active knee extension (AKE) test has been widely used to measure hamstring flexibility. During the AKE test, the knee extension is repeated six times. The first five repetitions are considered as warm-up, and the sixth is used as baseline. In order to accurately measure the subject's inherent flexibility, warm-up trials have been proposed as mentioned above; but currently, the evidence is insufficient. Design: Cross-sectional study. Methods: Forty-three healthy adults participated in this study. The AKE was performed slowly after flexing the hip and knee joints by 90° in a supine position. The knee was extended as far as could be done without causing discomfort or pain. When reaching the end range, knee flexion was performed without stopping. As per standard protocol, the subjects performed the knee extension six times. Results: There was no significant difference between the AKE value in the first trial with those in the other five trials. During the repetitions, the average value in the group with higher flexibility tended to decrease and the Intraclass correlation coefficient gradually decreased. Conclusion: Successive repetitions of the AKE test can misrepresent an individual's inherent hamstring flexibility. In order to avoid a decrease in hamstring flexibility, it is strongly recommended that individuals with high initial hamstring flexibility avoid unnecessary repetitions of the AKE test.

• 한국운동역학회지
• /
• 제32권4호
• /
• pp.141-146
• /
• 2022

Objective: The purpose of this study was to investigate the effects of different frequency on muscle function of the thigh in patients with degenerative knee arthritis during the functional electrical stimulation (FES). Method: For this study, 16 male participants over 65 who patients with degenerative knee arthritis were recruited as research participants. In this research, isokinetic muscular function, EMG, and joint position sensation were performed after FES treatment was applied for three conditions (FES 20, FES 50, and Without FES). For each dependent variable, one-way ANOVA with repeated measures was to determine whether there were significant differences among three different conditions (p<.05). When a significant difference was found, post hoc analyses were performed by using the contrast procedure. Results: When compared to FES 50 and without FES, FES 20 causes significant increase in isometric knee extension strength. No significant differences were found in EMG values across different EMS conditions. Conclusion: The present study examined isokinetic muscular function, EMG, and joint position sensation in order to investigate the effects of different frequency muscle function of knee extensors during the functional electrical stimulation. The results of this study showed that FES with 20 Hz frequency had positive effect on knee extensor. Based on the findings of the present study, FES with lower frequency may help the performer to focus on developing strength in knee extensor muscles.

• The Journal of Korean Physical Therapy
• /
• 제26권1호
• /
• pp.9-14
• /
• 2014

Purpose: The purpose of this study was to investigate how different knee alignments (genu varum and genu valgum) affected activations of quadriceps muscles with measurements of onset-time differences between vastus medialis and vastus lateralis during isometric contractions at both 30 and 60 degree knee flexion. Methods: Fifty-two adults (20 genu varum, 12 genu valgum, and 20 control) were enrolled in this study. Subjects with over 4cm distance between knee medial epicondyles were assigned to Genu varum, while subjects with over 4cm distance between ankles medial malleolus were considered as genu valgum group. Surface EMG was used to measure onset time of both vastus medialis and vastus lateralis during isometric contraction at 30 and 60 degree knee flexion. Results: The onset time of vastus lateralis was delayed in genu varum group, and that of vastus medialis was delayed in genu valgum group at both 30 and 60 degree knee flexions. Moreover, onset time difference at $30^{\circ}$ knee flexion between muscles was larger in genu valgum group than genu varum group. Conclusion: Subjects with genu varum or valgum activated quadriceps muscles with different orders pending on flexion degrees. Therefore, when quadriceps training program were planned to prevent pain or deformities, the findings that quadriceps were activated with different orders affected by knee alignments and joint degree at which trainings were performed, must be considered. If the selective training programs of quadriceps femoris are planned to prevent pain or deformities due to poor knee alignments, these should consider the subject's knee alignment condition.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.24-24
• /
• 2003

For the elderly, achieving a close-to-normal ambulation is important for activities of daily life. Recent researches of SE(Silver Engineering) restoring physical ability would help the elderly by developing the advanced gait assisting devices and orthoses. For the applications using the advanced technologies, the gait characteristics of the elderly must be understood. However, a few studies were performed to investigate the physiological or pathological gaits. The purpose of this study is to provide the gait analysis data and also to investigate relationships between alignment of the lower limb, foot progression angle and knee joint moments in the healthy elderly. By participating a total of 20 healthy elderly persons in this study, the following facts were found: 1) Cadence showed 114.8 steps/min, gait speed showed 1.05 m/s, time per a stride showed 1.06 sec, time per a step showed 0.53 sec, single-supporting phase was 0.41 sec, double-supporting phase was 0.24 sec, stride length was 1.04m, Step length was 0.56m; 2) The maximum knee flexion angle through swing phase showed left 46.82$^{\circ}$, right 40.19$^{\circ}$ and the maximum knee extension angle showed left -1.32$^{\circ}$, right 2.01$^{\circ}$. Knee varus showed left 26.90$^{\circ}$, right 30.93$^{\circ}$; 3) The maximum knee flexion moment showed left 0.363 Nm/kg, right 0.464 Nm/kg, The maximum knee extension moment showed left 0.389 Nm/kg, right 0.463 Nm/kg. The maximum knee adduction moment showed left 0.332 Nm/kg, right 0.379 Nm/kg. The maximum internal rotational moment showed left 0.13 Nm/kg, right 0.140 Nm/kg; 4) The subjects who had varus alignment of the lower extremity had statistically higher in knee adduction moment in mid stance phase; and 5) The subjects who had large foot progression angle had statistically lower in knee adduction moment in late stance phase.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.239-245
• /
• 2013

Purpose: Osteoarthritis occurs in many different joints of the body, causing pain, stiffness, and decreased function. The knee is the most frequently affected joint of the lower limb. The aim of this study was to investigate the differences of biomechanics between independent gait and anterior walker dependent gait of patients with osteoarthritis of the knee. Methods: Lower limb joint kinematics and kinetics were evaluated in 15 patients with knee osteoarthritis when walking independently and when walking with an anterior walker. Participants were evaluated in a gait laboratory, with self-selected gait speed and natural arm swing. Results: When walking with a dependent anterior walker, participants walked significantly faster (p<0.01), using a longer stride length (p<0.01), compared to independent gait. When walking with a dependent anterior walker, participants exhibited significantly greater knee flexion/extension motion (p<0.01) and lower knee flexion moment (p<0.05) compared to independent gait. When walking with a dependent anterior walker, participants showed significantly greater peak ankle motion (p<0.01), ankle dorsiflexion/plantarflexion moments (p<0.01), and ankle power generation (p<0.05) compared to independent gait. Conclusion: These biomechanical properties of gait, observed when participants walked with a dependent anterior walker, may be a compensatory response to impaired knee function to allow sufficient power generation for propulsion. Therefore, rehabilitative strategies for patients with osteoarthritis of the knee are needed in order to improve not only knee function but also hip and ankle function.

• 대한의용생체공학회:의공학회지
• /
• 제25권4호
• /
• pp.289-293
• /
• 2004

본 연구에서는 경사각도가 다른 내, 외측 후족 왯지를 착용하고 보행하는 동안 삼차원 동작분석시스템과 무선가속도측정시스템을 이용하여 무릎관절의 내번토크와 내외측 방향 가속도를 측정하였다. 내번토크와 외측 가속도는 하중수용기와 전유각기에서 각각 양의 절정값을 나타내었다. 하중수용기에 내측 왯지의 경우 내번토크와 외측 가속도가 맨발에 비하여 증가되었으며, 외측 왯지의 경우 내번토크와 외측 가속도값이 감소하였다. (p<0.05). 이러한 변화는 왯지의 경사각이 커질수록 더욱 뚜렷한 상관성을 보였다(p<0.05). 그러나 전유각기에서는 왯지의 방향과 경사에 따른 무릎의 내번토크와 내외측 가속도의 상관성을 확인할 수 없었다. 본 연구의 견과를 통하여 외측 왯지 사용 시 무릎관절의 내번토크가 감소되어 퇴행성 무릎관절염의 치료에 도움을 줄 수 있다. 또한, 보행 중 무릎관절의 내번토크 대신에 외측방향 가속도를 측정함으로써 간단히 왯지의 효과를 결정할 수 있을 것이다.

• 한국콘텐츠학회논문지
• /
• 제11권12호
• /
• pp.317-325
• /
• 2011

본 연구의 목적은 소아마비, 하지 근력약화 등의 장애인이 사용하는 잠금형 보조기무릎관절을 대체하기 위하여, 4절 연쇄 방식의 입각기조절형 보조기무릎관절을 개발하는 것이다. 본 연구에서 개발한 4절 연쇄 보조기무릎관절은 기존의 입각기조절형 보조기무릎관절과 달리, 기하학적으로 잠금상태가 제어되어 전기제어 부품 등이 필요하지 않으며 부피를 최소화하였다. 평가를 위하여, 소아마비로 진단받고 잠금형 보조기무릎관절을 사용해온 소아마비자가 대상자로 참여하였다. 대상자의 걸음걸이를 3차원으로 분석한 결과, 4절 연쇄 보조기무릎관절을 착용했을 때 입각기 동안 무릎관절의 신전이 유지되고 유각기 동안 무릎관절이 굴곡되며 자연스러운 걸음걸이를 보여주었다.