• 한국동물위생학회지
• /
• 제33권4호
• /
• pp.335-340
• /
• 2010

On the basis of the 2009 business plan, 20,394 Korean native cattle and beef cattle were carried examination of bovine tuberculosis by using ELISA technique from March to December. As a result, 66 cattle tested positive for tuberculosis and showed 0.32% positive ratio. Intradermal tuberculin test about 66 cases of ELISA positive cattle was carried out, and all of 66 cattle were confirmed as negative. However, when 7 PPD-positive cattle derived from slaughterhouse were tested by 20k ELISA kit and MS ELISA kit, 3 (2 suspect) cattle and 5 cattle showed positive results, respectively. As compared to the results of PPD test, the concordance rates were 43% (71% included suspect) with 20k ELISA kit and 71% with MS ELISA kit.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.601-604
• /
• 2008

We report on the Ag thickness effect on the electrical and optical properties of indium zinc tin oxide (IZTO)-Ag-IZTO multilayer electrode grown on a PET substrate and the surface plasmon effect of Ag layer on the optical properties of IZTO-Ag-IZTO electrode. Using an IZTO-Ag-IZTO multilayer with a total thickness below ~80 nm, we can obtain high-quality flexible electrode with very low sheet resistance, high transmittance, high work function and superior flexibility.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.193-197
• /
• 2002

Polyurethane casting wing fairings included in F-5E/F 15% spar kit are to be installed on aircraft wing surfaces and used for compensating the changes of the aerodynamic configuration by the leading edge extension fairings. These fairing are mandatory items in repairing wing areas and was imported from foreign supplier with long term delivery and high cost. Accordingly, local manufacturing is necessary to get rid of above disadvantages such as long term delivery and high cost. Basic properties test of specimen to be developed and part's requirements after localization was taken and its values were similar or higher when comparing with the original's even in low temp test at -55C. Casting mold process was used to manufacture the polyurethane fairings and its demensional stability ＆ physical condition was proper and met to the related specification and drawing's requirements

• 공학교육연구
• /
• 제15권3호
• /
• pp.40-46
• /
• 2012

This paper deals with an example of the engineering education through the SE-based development of an underwater-robot kit model. It has a purpose of establishing the example of a SE-based development by undergraduate through executing the requirement and functional analysis, hardware and software design, manufacturing, test and evaluation for developing the model. In addition, it also has a purpose of establishing the basis of the development of an optimized underwater-robot kit through understanding the weight and buoyancy characteristics and the actuation and propulsion characteristics of the developed model.

• 한국산업융합학회 논문집
• /
• 제11권4호
• /
• pp.171-175
• /
• 2008

The bigger size of the wafer to the meet the need of higher productivity and the smaller digital products for convene are examples of the main trends of the market among others. The higher integrity of chips is also an important task in semiconductor industry. In this thesis the COF(chop on film) technology has reviewed to investigate the best combinations of required functions and to develop a new system to save the installation area and to adapt to the variation of layout with flexibility. The new system shows the better and provides the improved safety with smaller size.

• 한국산업융합학회 논문집
• /
• 제10권1호
• /
• pp.39-46
• /
• 2007

The objective of this paper is to examine the detection limit, growth characteristics and notch curvature radius in short crack problem. Measurement techniques such as ultrasonic method and back-face strain compliance method were adapted. The fatigue crack growth rate of the short crack is slower than that of a long crack for a notched specimen. The short crack is detected effectively by ultrasonic method. A short surface crack occurs in the middle of specimen thickness and is transient to a through crack when maximum crack depth is larger than the notch curvature radius.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.249-254
• /
• 2015

Buoys are widely used in marine areas because they can mark positions and simultaneously acquire and exchange underwater, surface, and airborne information. Recently, the need for controlling and optimizing a buoy's position and attitude has been raised to achieve successful communication in a heterogeneous collaborative network composed of an underwater robot, a surface robot, and an airborne robot. A buoy in the form of a marine robot would be ideal to address this issue, as it can serve as a moving node of the communication network. Therefore, a buoy-based autonomous surface robot-kit with the abilities of sonar-based avoidance, dynamic position control, and static attitude control was developed and is discussed in this paper. The test and evaluation results of this kit show the possibility of real-world applications and the need for additional studies.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.409-410
• /
• 2012

본 논문에서는 스마트케어 서비스를 위해, Android 운영체제를 기반으로 하는 Device에서 ADK를 이용해 혈압계를 제어하는 방법을 제안한다. 이 방법은 소프트웨어와 하드웨어를 결합한 kit인 ADK를 사용하여 Hardware를 잘 모르는 사람들도 Android에서 Hardware의 GPIO에 좀 더 쉽게 접근하고 제어할 수 있어 보다 다양한 기능을 구현할 수 있다. 또한 이 방법으로 얻은 혈압계 데이터를 Database에 저장하여 데이터통신망을 통해 전문의에게 Feedback을 받음으로써 굳이 병원을 방문하지 않더라도 개인의 건강을 보다 편리하게 관리할 수 있어 한 단계 수준 높은 진단을 받을 수 있다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제21권1호
• /
• pp.65-68
• /
• 1998

We attempted to purify radiolabeled RNA using Sephadex G-15 and G-50 chromatography instead of commercial RNA purification kit. In the Sephadex G-15 chromatography the major portion of RNA was eluted in the fractions ranging from 3rd to 5th whereas broad elution profile of RNA was obtained from the Sephadex G-50 chromatography. The elution profile and purity of RNA obtained from Sephadex G-15 chromatography was very similar to that by commercial RNA purification kit. Furthermore, operating time required for purification of RNA by Sephadex G-15 was rather smaller than that by commercial kit. Overall results suggest that the purification of radiolabeled RNA using Sephadex G-15 is more money and time saying than using commercial RNA purification kit.

• Advances in aircraft and spacecraft science
• /
• 제9권1호
• /
• pp.39-57
• /
• 2022

Instead of developing new guided missiles, converting unguided missile into guided ones by adding guidance and controlkits hasbecome aglobaltrend.Ofthemost efficient andwidelyused thrust vector control(TVC) techniquesin rocketry isthe jet vanes placed inside the nozzle divergentsection. Upon deflecting them, lift created on the vanesistransferred to the rocket generating the desired control moment. The presentstudy examinesthe concept of using an add-on jet vaneTVC kit to a plain nozzle.The impact of adding the kit with different vaneslocations and deflectionanglesisnumericallyinvestigatedbysimulatingtheflowthroughthenozzlewiththekit.Twohingelocations are examined namely, at 24% and 36% of nozzle exit diameter. For each location, angles of deflection namely 0°, 5°, 10°, and 15° are examined. Focus is made on variation of control force, thrust losses, lift and drag on vanes, jet inclination, and jetflow structure withTVCkit design parameters.