• Coupled systems mechanics
• /
• 제8권6호
• /
• pp.537-553
• /
• 2019

In this paper we present geometrically exact Kirchhoff's initially curved planar beam model. The theoretical formulation of the proposed model is based upon Reissner's geometrically exact beam formulation presented in classical works as a starting point, but with imposed Kirchhoff's constraint in the rotated strain measure. Such constraint imposes that shear deformation becomes negligible, and as a result, curvature depends on the second derivative of displacements. The constitutive law is plasticity with linear hardening, defined separately for axial and bending response. We construct discrete approximation by using Hermite's polynomials, for both position vector and displacements, and present the finite element arrays and details of numerical implementation. Several numerical examples are presented in order to illustrate an excellent performance of the proposed beam model.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.427-434
• /
• 2014

Although ex situ target strength (TS) measurements using dual- and split-beam systems have become the primary approach of estimating fish abundance, theoretical model estimation is a powerful tool for verifying the measurements, as well as for providing values when making direct measurements is difficult. TS values for 20 samples of live bambooleaf wrasse (Pseudolabrus japonicus) whose target length (TL) ranged between 13.7 and 21.3 cm were estimated theoretically using the Kirchhoff-ray mode model, and the TS values for 18 live fish samples were additionally measured at ${\sim}0^{\circ}$ tilt angle to the swimming aspect using a tethered method at a frequency of 120 kHz to verify the theoretical values. The digitizing intervals used to extract the fish body and swim bladder morphology in the X-ray photographs significantly affected the calculated TS patterns, but variations based on the speed of sound and density ratio values for the general range of fish flesh were relatively small (within 1 dB). Close agreement was observed between the measured and theoretical TS values, and the correlation between the average TS and body length of the fish could be calculated accurately as <$TS_{120kHz}$>= 20logTL (cm) -71.6 using the theoretical method.

• 전산구조공학
• /
• 제10권1호
• /
• pp.185-191
• /
• 1997

보 및 아치형 구조물은 2차원 탄성체이지만 두께가 상대적으로 매우 얇다는 특성 때문에 Kirchhoff이나 Reissner-Mindlin이론과 같이 변위장의 두께방향 변위를 선형함수로 근사화시켜왔다. 그 결과 2차원 문제가 물체의 중립면에서 표현되는 1차원 문제로 차원이 감소되어 이론적 해석이 간편해 진다. 그러나 경계에서와 같이 두께방향 변위가 복잡한 영역의 거동을 보다 정확히 해석하기 위해서는 2차원 선형 탄성이론이나 두께방향 다항식의 차수가 상당히 높아야 한다. 본 논문은 두께방향 다항식의 차수변화에 따른 해석정도 경향 및 여러 다른 차수를 한 문제 영역에 혼합하는 모델조합에 대한 내용을 제시한다.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.528-533
• /
• 2005

A mono-static high frequency acoustic target strength analysis scheme was developed for underwater targets, based on the far-field Kirchhoff approximation. Au adaptive triangular beam method and a concept of virtual surface were adopted for considering the effect of hidden surfaces and multiple reflections of an underwater target, respectively. A test of a simple target showed that the suggested hidden surface removal scheme is valid. Then some numerical analyses, for several underwater targets, were carried out; (1) for several simple underwater targets, like sphere, square plate, cylinder, trihedral corner reflector, and (2) for a generic submarine model, The former was exactly coincident with the theoretical results including beam patterns versus azimuth angles, and the latter suggested that multiple reflections have to be considered to estimate more accurate target strength of underwater targets.

• Coupled systems mechanics
• /
• 제11권6호
• /
• pp.525-542
• /
• 2022

In this work we present an advanced approach to the design of small wind turbine support steel structures. To this end we use an improved version of previously developed geometrically exact beam models. Namely, three different geometrically exact beam models are used, the first two are the Reissner and the Kirchhoff beam models implementing bi-linear hardening response and the third is the Reissner beam capable of also representing connections response. All models were validated in our previous research for a static response, and in this work they are extended to dynamic response. With these advanced models, we can perform analysis of four practical solutions for the installation of small wind turbines in new or existing buildings including effects of elastoplastic response to vibration problems. The numerical simulations confirm the robustness of numerical models in analyzing vibration problems and the crucial effects of elastoplastic response in avoiding resonance phenomena.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.43-50
• /
• 2000

In the first-order shear deformation laminated beam theory (FSDT), the Kirchhoff hypothesis is relaxed such that the transverse normals do not remain perpendicular to the midsurface after deformation. Bending behavior of laminated composite thin-walled beams with singly- and doubly-symmetric open sections under uniformly distributed and concentrated loads is analyzed by the Timoshenko-type thin-walled beam theory. A closed-form expression for the shear correction factor of I-shaped composite laminated section is obtained. Numerical examples are presented to compare present analytical solutions by FSDT with the finite element solutions obtained by using three dimensional model. The effects of lamination of scheme and length-to-height ratio on the shear deformation of laminated composite beams with various boundary conditions are studied.

• 한국음향학회지
• /
• 제27권3호
• /
• pp.140-148
• /
• 2008

본 연구에서는 물리광학법 (physical optics)과 푸리에 변환 (Fourier transform)을 바탕으로 잠수함과 같이 크고 형상이 복잡한 수중표적의 시간영역 음파 후방산란 신호를 모의하기 위한 수치해석방법을 구현하였다. 키르코프-헬름홀쯔 적분식 (Kirchhoff-Helmholtz integral equation)에 키르코프 근사이론 (Kirchhoff approximation)을 적용하여 유도한 물리광학법을 바탕으로 수중표적의 후방산란 음파에 대한 주파수 응답을 계산하였으며, 시간영역 신호모의를 위해 구해진 주파수응답에 고속 역푸리에 변환 (inverse fast Fourier transform)을 취하였다. 입사 음파의 직접조사 면적을 산정하기 위한 적응 삼각형 빔 방법과 다중반사 효과를 고려하기 위한 가상면 개념을 도입하였다. 평면 음파가 정사각형 평판에 수직으로 입사하는 경우에 대한 수치해석 결과를 시간영역 물리광학법에 근거한 해석해와 비교하여 본 연구에서 구현한 수치해석방법의 정확성을 검증하였으며, 반구형 원통모델에 대한 수치모의 결과를 측정결과와 비교하여 본 연구방법이 거울반사 (specular reflection) 효과가 우세한 경우에 유효한 해를 제공할 수 있으나 작은 표적에 대해서는 오차를 줄 수 있음을 확인하였다. 또한, 이상화된 잠수함 모델에 대한 수치해석을 통해 실제 수중표적에 대한 시간영역 후방산란 해석으로의 적용 가능성을 확인하였다.

• Advances in concrete construction
• /
• 제13권3호
• /
• pp.223-231
• /
• 2022

The problem is formulated by applying the Kirchhoff's conception for shell theory. The longitudinal modal displacement functions are assessed by characteristic beam ones meet clamped-clamped end conditions applied at the shell edges. The fundamental natural frequency of rotating functionally graded cylindrical shells of different parameter versus ratios of length-to-diameter and height-to-diameter for a wide range has been reported and investigated through the study with fractions laws. The frequency first increases and gain maximum value with the increase of circumferential wave mode. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. Moreover, on increasing the rotating speed, the backward frequencies increases and forward frequencies decreases. The trigonometric frequencies are lower than that of exponential and polynomial frequencies. Stability of a cylindrical shell depends highly on these aspects of material. More the shell material sustains a load due to physical situations, the more the shell is stable. Any predicted fatigue due to burden of vibrations is evaded by estimating their dynamical aspects.

• 한국전산구조공학회논문집
• /
• 제24권2호
• /
• pp.149-156
• /
• 2011

본 논문에서는 생브낭의 원리를 이용하여 보/판/쉘 등의 구조물에서 응력분포를 후처리함으로써 개선할 수 있는 방법을 개발하였다. 생브낭의 원리에 따르면, 주어진 탄성문제에 대해서 실제의 응력분포에 상관없이 합응력들로 문제를 기술할 수 있다. 현재까지 알려진 바에 따르면 유일하게 점근적으로 타당한 이론들은 Euler-Bernoulli(E-B) 보이론과 Kirchhoff-Love(K-L) 판이론 등이 있다. 많은 공학적 문제들이 이 두 이론들에 기초하여 해석되어 왔음은 주지의 사실이다. 하지만, 현대의 공학 문제들은 보다 정확한 해석기법을 요구한다. 본 연구에서는 자유도가 상대적으로 많은 고차이론 등을 사용하지 않고, 고전적인 E-B 또는 K-L 해석결과를 합응력 등가의 원리를 이용하여 후처리함으로써 변위 및 응력분포를 정확하게 예측할 수 있는 방법을 개발하였고, 이방성 보 수치예제를 통해 제안된 방법론을 탄성해석법과 비교 검증하였다.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1440-1463
• /
• 2018

The Wagner coefficient is a key parameter used to describe the inelastic lateral-torsional buckling (LTB) behaviour of the I-beam, since even for a doubly-symmetric I-section with residual stress, it becomes a monosymmetric I-section due to the characteristics of the non-symmetrical distribution of plastic regions. However, so far no theoretical derivation on the energy equation and Wagner's coefficient have been presented due to the limitation of Vlasov's buckling theory. In order to simplify the nonlinear analysis and calculation, this paper presents a simplified mechanical model and an analytical solution for doubly-symmetric I-beams under pure bending, in which residual stresses and yielding are taken into account. According to the plate-beam theory proposed by the lead author, the energy equation for the inelastic LTB of an I-beam is derived in detail, using only the Euler-Bernoulli beam model and the Kirchhoff-plate model. In this derivation, the concept of the instantaneous shear centre is used and its position can be determined naturally by the condition that the coefficient of the cross-term in the strain energy should be zero; formulae for both the critical moment and the corresponding critical beam length are proposed based upon the analytical buckling equation. An analytical formula of the Wagner coefficient is obtained and the validity of Wagner hypothesis is reconfirmed. Finally, the accuracy of the analytical solution is verified by a FEM solution based upon a bi-modulus model of I-beams. It is found that the critical moments given by the analytical solution almost is identical to those given by Trahair's formulae, and hence the analytical solution can be used as a benchmark to verify the results obtained by other numerical algorithms for inelastic LTB behaviour.