• Structural Engineering and Mechanics
• /
• v.41 no.5
• /
• pp.617-632
• /
• 2012

An isogeometric approach is presented for static analysis of thin plate problems of various geometries. Non-Uniform Rational B-Splines (NURBS) basis function is applied for approximation of the thin plate deflection, as for description of the geometry. The governing equation based on Kirchhoff plate theory, is discretized using the standard Galerkin method. The essential boundary conditions are enforced by the Lagrange multiplier method. Several typical examples of thin plate and thin plate on elastic foundation are solved and compared with the theoretical solutions and other numerical methods. The numerical results show the robustness and efficiency of the proposed approach.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.18-27
• /
• 1999

Predicting the deformation behaviors of sheets in thermoforming processes has been a daunting challenge due to the strong nonlinearities arising from very large deformations, mold-polymer contact condition and hyperelasticity constitutive equations. Nonlinear numerical analysis is always required to face this challenge especially for realistic processing conditions. In this study a 3-D algorithm and the membrane approximation are developed for thermoforming processes. The constitutive equation is expressed in terms of the 2nd Piola-Kirchhoff stress tensor and the Cauchy-Green deformation tensor. The 2-term Mooney-Rivlin model is used for the material model equation. The algorithm is established by the finite element formulation employing the total Lagrangian coordinate. The deformation behavior and the stress distribution results of 3-D algorithm with various point boundary conditions are compared to those of the membrane approximation algorithm. Also, the slip boundary condition and the no-slip boundary condition are applied for the systems that have molds. Finally, the effect of sheet temperatures on the final thickness distribution is investigated for the ABS material.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.140-148
• /
• 2008

In this study, a numerical method for a time-domain acoustic wave backscattering analysis is established based on a physical optics and a Fourier transform. The frequency responses of underwater targets are calculated based on physical optics derived from the Kirchhoff-Helmholtz integral equation by applying Kirchhoff approximation and the time-domain signals are simulated taking inverse fast Fourier transform to the obtained frequency responses. Particularly, the adaptive triangular beam method is introduced to calculate the areas impinged directly by acoustic incident wave and the virtual surface concept is adopted to consider the multiple reflection effect. The numerical analysis result for an acoustic plane wave field incident normally upon a square flat plate is coincident with the result by the analytic time-domain physical optics derived theoretically from a conventional physical optics. The numerical simulation result for a hemi-spherical end-capped cylinder model is compared with the measurement result, so that it is recognized that the presented method is valid when the specular reflection effect is predominant, but, for small targets, gives errors due to higher order scattering components. The numerical analysis of an idealized submarine shows that the established method is effectively applicable to large and complex-shaped underwater targets.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.440-451
• /
• 2014

A multi-static SONAR system consists of the transmitters and receivers separately in space. The active target echoes are received along the transmitter-target-receiver path and depend on the shape and aspect angle of the submerged objects at each receiver. Thus, the target echo algorithm used with a mono-static system, in which the transmitter and receiver are located at the same position, has limits in simulating the target echoes for a multi-static SONAR system. In this paper, a target echo modeling procedure for a 3D submerged object in space is described based on the Kirchhoff approximation, and the SONAR system is extended to a multi-static SONAR system. The scattered field from external structures is calculated on the visible surfaces, which is determined based on the locations of the transmitter and receiver. A series of experiments in an acoustic water tank was conducted to measure the target echoes from scaled targets with a single transmitter and 16 receivers. Finally, the numerical results were compared with experimental results and shown to be useful for simulating the target echoes/target strength in a multi-static SONAR system.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.116-123
• /
• 2013

This paper represents generation of time-varying underwater acoustic channels by performing scattering simulation with time-varying ocean surface and Kirchhoff approximation. In order to estimate the time-varying ocean surface, 1D Pierson-Moskowitz ocean power spectrum and Gaussian correlation function were used. The computed scattering coefficients are applied to the amplitudes of each impulse of BELLHOP simulation result. The scattering coefficients are then compared with measured doppler spectral density of signal components which were scattered from ocean surface and the correlation time used in the Gaussian correlation function was estimated by the comparison. Finally, bit-error-rate and channel correlation simulations were performed with the generated time-varying channel based on passive time-reversal communication scenario.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.435-442
• /
• 2014

In this paper, radar cross section (RCS) analysis program, RACSAN has been developed to predict RCS of complex structures. RACSAN is based on the high frequency range analysis method of Kirchhoff approximation in physical optics (PO). This program can present RCS including multi-bounce effect in complex structures by combination of geometric optics (GO) and PO method. GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of RCS for the final effective area that is evaluated by GO method. Comparisons of the predicted results and analytical solutions showed that the developed program could be an effective tool for predicting RCS in complex structures.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.64-70
• /
• 2005

Target Strength(TS) is an important factor for the detection of the target in an active sonar system: thus the numerical model for the prediction of TS is widely being developed. For the frequency range of several kHz, the most important scattering mechanism is known to be specular reflection, which is largely affected by the geometrical shape of the target. In this paper, a numerical algorithm to predict TS is developed based on the Kirchhoff approximation which is computationally efficient. The developed algorithm is applied to the canonical targets of simple shapes, for which the analytical solutions exist. The numerical results show good agreement with the analytical solutions. Also, the algorithm is applied to more complex scatterers, and is compared with the experimental data obtained in the water tank experiment for the purpose of verifying the developed numerical model. Discussions on the effect of spatial sampling and other aspects of numerical m odeling are presented.

• The Korean Journal of Rheology
• /
• v.8 no.3_4
• /
• pp.215-225
• /
• 1996

평판형의 열가소성 수지를 유리전이온도 이상으로 가열한 다음 압력을 가함으로써 원하는 형상의 제품을 성형하는 열성형공정은 대상 수지가 큰 변형을 일으킬 뿐만 아니라 비선형적 거동을 보이게 된다. 따라서 수지의 변형거동 예측과 최적성형조건의 설정에 많은 어려움과 시행착오를 거치게 되는 바, 열성형 공정의 최적화를 위한 연구의 일환으로 원형 평판위 수지를 대상으로 수지의 부풀림 거동과 이에 따른 두께 분포를 예측할수 있는유한요 소법의 수치모사 알고리듬을 개발하고자 하였다. Piola-Kirchhoff 응력 텐서와 Green 변형 텐서 및 lagrangian 변형 텐서를 사용하여 평판상의 응력-변형에 대한 비선형의 에너지 수 지식을 수립하고 Newton-Raphson 반복수렴법을 이용하여 근사적으로 해석하였으며 수지의 유변학적 구성방정식으로는 neo-Hookean 모델, Mooney-Rivlin 모델 및 Ogden 모델등의 초탄성 모델을 사용하여 그결과를 비교하였다. 수치모사에는 두께가 매우 얇기 때문에 두께 방향의 응력변화를 무시할수 있는 membrane 가정을 도입한 2차원적 해석과 두께 방향의 응력 변화를 고려하는 3차원적 해석을 모두 수행하고 그 차이를 비교하였으며 3차원적 해석 의 경우에는 penalty법을 이용하여 비 압축성을 만족하였다. 일차적으로 내압을 받는 두꺼 운 원통계에 대한 수치모사 해석을 수행하고 완전해와 비교함으로써 개발된 수치모사 알고 리듬의 열성형 공정에의 적용 타당성을 검증하였으며 이를 이용하여 원형 평판의 자유부풀 림거동을 예측한 결과 Treloar 등의 실험결과와 잘 부합함을 확인하였다. 또 간단한 형상의 금형이 있는 경우와 반지름 방향으로의 온도변화에 따른 수지의 변형거동을 해석함으로써 실제 열성형 공정에서 요구되고 있는 성형품의 두께 분포를 균일하게 하기 위한 방안을 제 시하였다.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.806-812
• /
• 1999

Dynamic behaviors are analyzed for a flexble spinning disk with angular acceleration, considering geometric nonlinearity. Based upon the Kirchhoff plate theory and the von Karman strain theory, the nonlinear governing equations are derived which are coupled equations with the in-plane and out-of-planedisplacements. The governing equations are discretized by using the Galerkin approximation. With the discretized nonlinear equations, the time responses are computed by using the generalized-$\alpha$ method and the Newton-Raphson method. The analysis shows that the existence of angular acceleration increases the displacements of the spinning disk and makes the disk unstable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.55-57
• /
• 2011

TLM method to analyize receiver gain characteristic of the FZPL antenna which is operated at 12GHz and can be applied to satellite TV system, radio telescope, and Geodetic System. Some numerical results computed by TLM method are compared with Kirchhoff's approximation and PO method. As a result, receiver gain characteristic on main axis of the 12GHz FZPL antenna is shown at the front side, which means that the focal length is 15% shorter than designed focal length.