• 청정기술
• /
• 제25권3호
• /
• pp.198-205
• /
• 2019

야자계 입상활성탄에 대한 Brilliant Green의 흡착 평형과 동역학 및 열역학 파라미터들을 다양한 초기농도($300{\sim}500mg\;L^{-1}$), 접촉시간(1 ~ 12 h) 및 흡착온도(303 ~ 323 K)를 변수로 하여 회분식 실험을 통하여 연구하였다. 흡착평형 값들은 Langmuir, Freundlich, Temkin, Harkins-Jura 및 Elovich 식으로 해석하였다. 그 결과는 Langmuir 식에 가장 잘 맞았으며, 평가된 Langmuir 무차원 분리계수 값($R_L=0.018{\sim}0.040$)과 Freundlich 상수값(1/n = 0.176 ~ 0.206)은 활성탄에 의한 Brilliant Green의 흡착이 효과적인 공정임을 보여주었다. Temkin 식에 의해 평가된 흡착열 관련상수($B=12.43{\sim}17.15J\;mol^{-1}$)는 물리흡착에 해당하였다. Harkins-Jura 식에 의한 등온선 매개변수($A_{HJ}$)는 온도가 증가할수록 이종 기공 분포도 증가함을 나타내었고, Elovich 식에 의한 최대흡착용량은 실험값보다 매우 적은 것으로 나타났다. 흡착공정은 유사이차반응속도식에 더 잘 맞았으며, 흡착과정은 입자내 확산이 율속단계였다. 입자내 확산속도 상수는 초기 농도가 커질수록 염료의 운동이 활발해졌기 때문에 증가하였다. 그리고 초기농도가 커질수록 경계층의 영향이 커졌다. Gibbs 자유에너지($-3.46{\sim}-11.35kJ\;mol^{-1}$), 엔탈피($18.63kJ\;mol^{-1}$) 및 활성화에너지($26.28kJ\;mol^{-1}$)는 흡착공정이 자발적이고, 흡열 및 물리흡착임을 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.224-230
• /
• 2006

Escherichia coli transcription termination factor Rho catalyzes the unwinding of RNA/DNA duplex in reactions that are coupled to ATP binding and hydrolysis. We report here the kinetic mechanism of presteady state ATP binding and hydrolysis by the Rho-RNA complex. Presteady state chemical quenched-flow technique under multiple turnover condition was used to probe the kinetics of ATP binding and hydrolysis by the Rho-RNA complex. The quenched-flow presteady state kinetics of ATP hydrolysis studies show that three ATPs are bound to the Rho-RNA complex with a rate of $4.4\;{\times}\;10^5M^{-1}s^{-1}$, which are subsequently hydrolyzed at a rate of $88s^{-1}$ and released during the initiation process. Global fit of the presteady state ATP hydrolysis kinetic data suggests that a rapid-equilibrium binding of ATP to Rho-RNA complex occurs prior to the first turnover and the chemistry step is not reversible. The initial burst of three ATPs hydrolysis was proposed to be involved in the initialization step that accompanies proper complex formation of Rho-RNA. Based on these results a kinetic model for initiation process for Rho-RNA complex was proposed relating the mechanism of ATP binding and hydrolysis by Rho to the structural transitions of Rho-RNA complex to reach the steady state phase, which is implicated during translocation along the RNA.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.125-132
• /
• 2012

The removal of Cd(II) and Cu(II) from aqueous solution by an agricultural solid waste biomass prepared from Moringa oleifera bark (MOB) was investigated. The biosorbent was characterized by Fourier transform infrared spectroscopy and elemental analysis. Furthermore, the effect of initial pH, contact time, biosorbent dosage, initial metal ion concentration and temperature on the biosorption of Cd(II) and Cu(II) were studied using the batch sorption technique. Kinetic studies indicated that the biosorption process of the metal ions followed the pseudo-second order model. The biosorption data was analyzed by the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models. Based on the Langmuir isotherm, the maximum biosorption capacities for Cd(II) and Cu(II) onto MOB were 39.41 and 36.59 mg/g at 323 K, respectively. The thermodynamic parameters, Gibbs free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$), and entropy (${\Delta}S^o$) changes, were also calculated, and the values indicated that the biosorption process was endothermic, spontaneous and feasible in the temperature range of 303-323 K. It was concluded that MOB powder can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Cd(II) and Cu(II) ions from aqueous solution.

• 한국식품영양과학회지
• /
• 제9권1호
• /
• pp.59-73
• /
• 1980

A detailed procedure was described for the isolation of cratine kinase (ATP-Creatine phosphotransferase, E. C. 2. 7. 3. 2.) from the muscle of the snake Bungarus fasciatus. The original isolation procedure of Kuby et al. for the rabbit muscle enzyme has been modified and extended to include a chromatographic step. The properties of the enzyme have been investigated and kinetic constants for the reverse reactions determined as the followings: 1) A molecular weight of the enzyme was determined by gel filteration on Sephadex G-100 and by electrophoresis on SDS-polyacrylamide was 86,000. 2) Two reactive sulphydryl groups were detected with dithiobis nitrobenzoic acid (DTNB). 3) The nucleotide substrate specificity in the reverse reaction was determined as ADP*2'-dADP＞GDP＞XDP＞UDP with magnesium as the activating metal ion. 4) The order of the metal specificity in the reverse reaction Mg>Mn>$Ca{\sim}Co$ was determined with ADP as substrate. 5) A detailed kinetic analysis was carried out in the reverse direction with $MaADP^-$ as the nucleotide substrate. Initial velocity and product inhibition studies($MaADP^{2-}$ competitive with respect to MgADP- and noncompetitive with respect to $N-phosphorycreatine^{2-}$ ; Creatine competitive with respect to $N-phosphorycreatine^{2-}$ and noncompetitive with respect to Ma $ADP^-)$ indicated that the reaction obeyed a sequential mechanism of the rapid equilibrium random type.

• Environmental Engineering Research
• /
• 제16권2호
• /
• pp.55-60
• /
• 2011

The removal of hexavalent chromium from aqueous solutions onto modified holly sawdust was studied at varying initial hexavalent chromium concentrations, adsorbent doses, pHs and contact times. The removal of hexavalent chromium from aqueous solutions increased with increasing adsorbent dosage and contact time. The percentage of hexavalent chromium removed from the aqueous solutions decreased with increasing hexavalent chromium concentration and pH of the solution. The kinetics of the adsorption of hexavalent chromium onto modified holly sawdust was analyzed using pseudo first-order and pseudo second-order models. The pseudo second-order model described the kinetics of adsorption of hexavalent chromium. The Langmuir and Freundlich isotherm models were used for modeling of the adsorption equilibrium data. The Langmuir isotherm model well described the equilibrium data for the removal of hexavalent chromium by modified holly sawdust. The obtained maximum adsorption capacity was 18.86 mg/g at pH 7. The results showed that modified holly sawdust can be used as a low cost adsorbent for the treatment of aqueous solutions containing chromium.

• 대한환경공학회지
• /
• 제33권9호
• /
• pp.623-629
• /
• 2011

입상활성탄에 의한 트리사이크라졸의 흡착특성을 회분식 실험을 통해 조사하였다. 트리사이크라졸에 대한 흡착동력학적 연구는 298, 308, 318 K에서 초기농도 250, 500, 1,000 mg/L의 수용액을 가지고 수행하였다. 입상활성탄에 의한 트리사이크라졸의 흡착평형관계는 298 K에서 Freundlich 등온식이 잘 적용되었다. 유사일차반응속도식과 유사이차반응속도식을 사용하여 동력학 실험값을 평가한 결과, 유사이차반응속도식이 더 잘 맞았으며, 속도상수($k_2$) 값은 초기농도 250, 500, 1,000 mg/L에 대해 각각 0.1076, 0.0531 및 0.0309 g/mg h로 조사되었다. 이 값을 이용하여 활성화에너지, 표준엔탈피, 표준엔트로피 및 표준 자유에너지를 평가하였다. 또한 표준자유에너지값은 초기농도 500 mg/L에서 -4.25~-8.15 J/mol로 조사되어 흡착공정이 자발적인 공정임을 알 수 있었다. 조사된 표준엔탈피변화량은 -66.43 J/mol을 나타내어 활성탄에 대한 트리사이크라졸의 흡착이 발열반응으로 일어난다는 것을 알 수 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.302-305
• /
• 2002

Scoria is a bomb-sized, generally vesicular pyroclast that is red or black in color and light in weight. In this study, scoria from Cheju was examined for the use as a sorbent. It is composed of plagioclase, olivine, hornblende, pyroxene, and glass, with an average composition of 49.84% SiO$_2$, 14.07% A1$_2$O$_3$, End 9.14% Fe$_2$O$_3$. Studies on kinetic isotherm sorption of Zn(II) onto scoria under various parameters such as initial zinc concentration, particle size, and adsorbent/adsorbate ratio were carried out using an agitated batch. The results suggest that the smaller scoria size and the larger adsorbent/adsorbate ratio produce the higher degree of Zn(II) removal. More effective removal also appears at lower initial Zn concentration. The sorption behavior of Zn(II) onto scoria seems to be mainly controlled by cation exchange. Studies on equilibrium isotherm sorption of other heavy metals (Pb, Cu, Cd) onto scoria were also conducted and compared with those onto powdered activated carbon (PAC) and non-organic matter scoria (NOS), The results suggest that the Cheju scoria has the slightly higher sorption capability than PAC and NOS, and the order of the effective sorption onto scoria and PAC is Pb > Cu > Zn > Cd. The monometal sorption onto scoria is more stronger than the competitive sorption.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.498-503
• /
• 2016

The characteristics of aqueous lithium recovery by ion exchange were studied using three commercial cation exchange resins: CMP28 (porous type strong acid exchange resin), SCR-B (gel type strong acid exchange resin) and WK60L (porous type weak acid exchange resin). CMP28 was the most effective material for aqueous lithium recovery; its performance was even enhanced by modifying the cation with $K^+$. A comparison to $Na^+$ and $H^+$ form resins demonstrated that the performance enhancement is reciprocally related to the electronegativity of the cation form. Further kinetic and equilibrium isotherm studies with the $K^+$ form CMP28 showed that aqueous lithium recovery by ion exchange was well fitted with the pseudo-second-order rate equation and the Langmuir isotherm. The maximum ion exchange capacity of aqueous lithium recovery was found to be 14.28 mg/g and the optimal pH was in the region of 4-10.

• 자원리싸이클링
• /
• 제10권4호
• /
• pp.10-17
• /
• 2001

The present work investigates the possible use of fly ash for the removal of heavy metal ions from aqueous solutions. Batch experiments were conducted and the influences of metal concentration, pH, and fly ash concentration were investigated. Heavy metals used in these studies were lead and zinc. Adsorption studies were done over a range of pH values (3~10) at $25^{\circ}C$ and heavy metal concentrations of 10~400 mg/L using fly ash concentrations of 10 and 20 g/L. Experiments were also conducted without fly ash to determine the extent of heavy metal removal by precipitation. Kinetic and equilibrium experiments were performed and adsorption data were correlated with both Langmuir and Freundlich adsorption models. The results of these studies indicate that 리y ash can be used as an adsorbent for heavy metals in the aqueous solutions, yet the degree of removal depends on the pH.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.514-519
• /
• 2017

활성탄을 사용하여 흡착제의 양, pH, 초기농도, 접촉시간과 온도를 흡착변수로 acid green 27 염료의 흡착특성을 조사하였다. 흡착평형자료는 Freundlich와 Langmuir 등온식을 사용하여 해석하였는데, Freundlich 식이 더 좋은 일치도를 나타냈다. 평가된 Freundlich 분리계수(1/n=0.293~0.387)로부터 활성탄에 의한 acid green 27의 흡착조작이 효과적인 처리방법이 될 수 있음을 알았다. 흡착속도실험 결과는 유사이차 반응속도식에 잘 맞았으며, 유사이차속도상수($k_2$)값은 acid green 27 초기농도가 증가할수록 감소하였다. 활성화에너지값(10.457 kJ/mol)과 표준엔탈피변화값(76.946 kJ/mol)으로 흡착공정이 물리흡착이고 흡열반응임을 알았다. 298~318 K 범위에서 Gibbs 자유에너지값은 온도가 올라갈수록 감소하였기 때문에 흡착반응은 온도가 올라갈수록 더 자발적으로 일어났다.