• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1256-1263
• /
• 2015

A novel vector control strategy for a permanent magnet synchronous motor (PMSM) based on the kinetic energy stored in the rotor is proposed in this paper. The novel strategy is composed of two closed loops, in which the current loop is the inner loop, and the kinetic energy serves as the outer loop. The theoretical basis and the design procedure of the two loops are given. The feasibility of the proposed control strategy is verified by experimental results. When compared with traditional vector control strategies, the proposed vector control strategy based on energy feedback has better dynamic performance. In addition, an effective estimation solution for the load variation is put forward.

• Journal of Microbiology and Biotechnology
• /
• 제13권3호
• /
• pp.332-337
• /
• 2003

Enzyme kinetics data play a vital role in the design of reactors and control of processes. In the present study, kinetic studies on pectinases were carried out. Partially purified polymethylgalacturonase (PMG) and polygalacturonase (PG) were the two pectinases studied. The plot of initial rate vs. initial substrate concentration did not follow the conventional Michaelis-Menten kinetics, but substrate inhibition was observed. For PMG, maximum rate was attained at an initial pectin concentration of 3 g/l, whereas maximum rate was attained when the initial substrate concentration of 2.5 g/l of polygalacturonic acid for PG I and PG II. The kinetic data were fitted to five different kinetic models to explain the substrate inhibition effect. Among the five models tested, the combined mechanism of protective diffusion limitation of both high and inhibitory substrate concentrations (semi-empirical model) explained the inhibition data with 96-99% confidence interval.

• 한국분무공학회지
• /
• 제13권4호
• /
• pp.193-199
• /
• 2008

Spray coating is a versatile surface modification technology in which coating is built-up based on the successive deposition of micron-scaled particles. Depending on the coating materials, the coatings can meet the required mechanical properties, corrosion resistance, and other properties of base materials. Spraying processes are mainly classified into thermal and kinetic spraying according to their bonding mechanism and deposition characteristics. Specifically, thermal spraying process can be further classified into many categories based on the design and mechanism of the process, such as frame spraying, arc spraying, atmospheric plasma spraying (APS), and high velocity oxygen-fuel (HVOF) spraying, etc. Kinetic spraying or cold gas dynamic spraying is a newly emerging coating technique which is low-temperature and high-pressure coating process. In this paper, overall view of thermal and kinetic spray coating technologies is discussed in terms of fundamentals and industrial applications. The technological characteristics and bonding mechanism of each process are introduced. Deposition behavior and properties of technologically remarkable materials are reviewed. Furthermore, industrial applications of spray coating technology and its potentials are prospected.

• 조형예술학연구
• /
• 제8권
• /
• pp.267-296
• /
• 2005

Typography, as the median for communication, has expanded its roles according the attributes of the media where it Is used, and the change of media follwing the change of times is presenting new directions to the field of typography. The attempts of 20C experimental typography prioritize visual formativeness, free typography and language started to appear on printed matters and different kinds of prints put pep in magazines. Thus, experiments in the aspects of effective delivery of inpormation that letters have and aesthetic side of shapes of letter are continuing. Today with the appearance of multimedia, development of visual colture and rapid development of digital technology, the range of experimental typography has expanded even wider and therefore, different kinds of expressions became possible. As seen above, unlike the existing static printed media that carries linguistic information only, letters in the multimedia environment is shown in the movie titles, TV or web not only as a basic visual media such as type and image, but as a dynamic and complex factor that contains additional information of motion and sound factor. This study will attempt to find the historic context of focus of moment from the kinetic art and define the moving letters as kinetic typography. Therefore, this paper will have an understanding on kinetic typography's background, concept and characteristics following the change of communication environment in the multimedia era and tried to study the basic theories of kinetic typography and the information delivery and imagery function of letters. Also, this paper attempted to carry out a study on whether kinetic typography is delivering information smoothly from the aspect of communication through the image role as delivering information by studying major works of artists who have influenced kinetic typography. Based on this study, I would like to suggest new direction for effective delivery of information and value of use.

• 패션비즈니스
• /
• 제9권4호
• /
• pp.94-112
• /
• 2005

This study focuss on the futurism expressed in Paco Rabanne's works. Paco Rabanne, who has created experimental and prophetic avant-garde fashion by cutting edge techniques and revolutionary new materials, is known as one of the most influential fashion designer of modern times. First, Light, one of the most important element in Paco Rabanne's fashion design, shows some influence of medieval symbols of love and salvation. Second, the artistic trends which influenced on Paco Rabanne's fashion include surrealism, op art and kinetic art. His use of new materials and avant-garde style represents the influence of surrealism. His experimental use of waving plastics and glittering metal during his early period is especially related with op art and kinetic art in the early 1960's which emphasize the artistic effect of light and movement. Third, the characters of Paco Rabanne's works are the harmony of technology and the beauty oh machine by the geometrical figures like triangles, rectangles, and circles and represent and movement,and the innovational creative methods, voluptuous beauty.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.85-93
• /
• 2021

For accurate and reliable process design for phenol oxidation in a plug flow reactor with supercritical water, modeling can be very insightful. Here, the velocity and density distribution along the reactor have been predicted by a numerical model and variations of temperature and phenol mass fraction are calculated under various flow conditions. The numerical model shows that as we proceed along the length of the reactor the temperature falls from above 430 ℃ to approximately 380 ℃. This is because the generated heat from the exothermic reaction is less that the amount lost through the walls of the reactor. Also, along the length, the linear velocity falls to less than one-third of the initial value while the density more than doubles. This is due to the fall in temperature which results in higher density which in turn demands a lower velocity to satisfy the continuity equation. Having a higher oxygen concentration at the reactor inlet leads to much faster phenol destruction; this leads to lower capital costs (shorter reactor will be required); however, the operational expenditures will increase for supplying the needed oxygen. The phenol destruction depends heavily on the kinetic parameters and can be as high as 99.9%. Using different kinetic parameters is shown to significantly influence the predicted distributions inside the reactor and final phenol conversion. These results demonstrate the importance of selecting kinetic parameters carefully particularly when these predictions are used for reactor design.

• 대한기계학회논문집B
• /
• 제41권5호
• /
• pp.341-346
• /
• 2017

본 연구는 해석적 접근이 용이한 실리콘 내 포논 평균자유행로(mean free path, MFP) 스펙트럼(spectrum) 열전도 특성 예측 모델을 제시했다. 해석이 용이한 포논 기체 운동론(kinetic theory)을 적용하기 위해, 나노구조물의 현상학적 접근으로 열전도에 관여하는 포논 모드(mode)들만 추출하고, 300 K의 실리콘에 대한 포논의 분산관계(dispersion relations) 및 분극(polarization) 효과가 고려된 포논의 주파수 변화에 따른 비열(specific heat)과 군속도(group velocity) 및 MFP 정보를 사용했다. 300 K의 실리콘 내 포논의 MFP 스펙트럼 열전도율 기여를 계산하고, 기존 실험결과 및 제1원리 기법 결과와 비교하여, 본 방법의 타당함을 보였다. 본 연구를 통해, 나노구조물 열전달 해석모델 개발 및 나노재료 열전달 특성 조정(tailoring) 전략 설계에 필요한 포논 MFP 스펙트럼 열전도 특성 정보를 해석이 용이한 방법으로 구할 수 있는 방법을 제공했다.

• Structural Engineering and Mechanics
• /
• 제39권3호
• /
• pp.427-447
• /
• 2011

The progressive collapse phenomenon is generally regarded as dynamic. Due to the impracticality of nonlinear dynamic computations for practitioners, an interest arises for the development of equivalent static pushover procedures. The present paper proposes a methodology to identify such a procedure for sudden column removals, using energetic evaluations to determine the pushover loads to apply. In a dynamic context, equality between the cumulated external and internal works indicates a vanishing kinetic energy. If such a state is reached, the structure is sometimes assumed able to withstand the column removal. Approximations of these works can be estimated using a static computation, leading to an estimate of the displacements at the zero kinetic energy configuration. In comparison with other available procedures based on such criteria, the present contribution identifies loading patterns to associate with the zero-kinetic energy criterion to avoid a single-degree-of-freedom idealisation. A parametric study over a family of regular steel structures of varying sizes uses non-linear dynamic computations to assess the proposed pushover loading pattern for the cases of central and lateral ground floor column failure. The identified quasi-static loading schemes are shown to allow detecting nearly all dynamically detected plastic hinges, so that the various beams are provided with sufficient resistance during the design process. A proper accuracy is obtained for the plastic rotations of the most plastified hinges almost independently of the design parameters (loads, geometry, robustness), indicating that the methodology could be extended to provide estimates of the required ductility for the beams, columns, and beam-column connections.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.136-144
• /
• 2006

Vehicles usually have 3 types of speed pattern like acceleration, travel, and deceleration. It requires much driving energy from engine while accelerating, preserves much kinetic energy by inertia moment at travel speed, and releases the kinetic energy to the air while decelerating by the break system. If we accumulate the kinetic energy while decelerating and reuse the energy at the accelerating stage, then it can elevate the fuel efficiency, reduce the emission and improve the motive power. This paper proposes a hydraulic type energy regenerative system which converts the kinetic energy into hydraulic energy at the stage of deceleration and reuses it at the starting and accelerating stage of vehicles. The test equipment which has the field condition of city bus was prepared to evaluate the performance for energy regeneration. The test results show that both energy regeneration efficiency and fuel efficiency are improved significantly and the emission is reduced notably.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.855-861
• /
• 1989

본 연구에서는 평행 사변형 구조를 갖는 매니퓰레이터의 운동에너지와 포텐셜 에너지를 구하고, 운동 에너지 식에서 매니퓰레이터 관성 모멘트 행렬 (manipulator inertia matrix)를 구한다.