• Coupled systems mechanics
• /
• v.2 no.1
• /
• pp.23-51
• /
• 2013

An analytical algorithm for the estimation of the resistance forces exerted on the dipper of a cable shovel and the specific energy consumed in the cutting-loading process is presented. Forces due to payload and to cutting of geomaterials under given initial conditions, cutting trajectory of the bucket, bucket's design, and geomaterial properties are analytically computed. The excavation process has been modeled by means of a kinematical shovel model, as well as of dynamic payload and cutting resistance models. For the calculation of the cutting forces, a logsandwich passive failure mechanism of the geomaterial is considered, as has been found by considering that a slip surface propagates like a mixed mode crack. Subsequently, the Upper-Bound theorem of Limit Analysis Theory is applied for the approximate calculation of the maximum reacting forces exerted on the dipper of the cable shovel. This algorithm has been implemented into an Excel$^{TM}$ spreadsheet to facilitate user-friendly, "transparent" calculations and built-in data analysis techniques. Its use is demonstrated with a realistic application of a medium-sized shovel. It was found, among others, that the specific energy of cutting exhibits a size effect, such that it decreases as the (-1)-power of the cutting depth for the considered example application.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.82-90
• /
• 2005

Recently, the in-line vision inspection has become the subject of growing research area in the visual control systems and robotic intelligent fields that are required exact three-dimensional pose. The objective of this article is to study the pc based in line visual inspection with the hand-eye structure. This paper suggests three dimensional structured light measuring principle and design method of laser sensor header. The hand-eye laser sensor have been studied for a long time. However, it is very difficult to perform kinematical analysis between laser sensor and robot because the complicated mathematical process are needed for the real environments. In this problem, this paper will propose auto-calibration concept. The detail process of this methodology will be described. A new thinning algorithm and constrained hough transform method is also explained in this paper. Consequently, the developed in-line inspection module demonstrate the successful operation with hole, gap, width or V edge.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.311-318
• /
• 2010

This study examined the double piked dismount among the landing techniques of parallel bars based on three-dimensional motion analysis. Four male national gymnasts were the subjects. This study was performed to provide quantitative data highlighting players strengths and weaknesses to enable more stable landing technique. The variables analyzed were the position and velocity of center of gravity(CG) and angles of shoulder joints, hip joints, and trunk. The results are as follows: S1 secured the height of flight with fast vertical rise. After the easy spin in the air, he conducted a stable landing maintaining a proper hip joints angle. S2, S3, and S4, however, began the backward somersault already before leaving the bars, so they moved backward greatly making it more difficult to achieve a higher flight path. As a result, they couldn't control the velocity of their backward movement at landing. For a stable landing, they have to maintain the negative shoulder angle when rising, minimize both antero-posterioror side-to-side movements by doing a strong tap using hip joints, to secure the height of flight before the somersault. Results also show that at the descent, they should conduct rapid spinning by increasing their shoulder and hip joints to the maximum while controlling their velocity.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.32.4-33
• /
• 2018

We study the kinematical properties of the Seyfert galaxy, NGC 4051 and Mrk 79. The data used in this study had been observed with OASIS spectrometer at CFHT 3.6m telescope using O300 grism, MR1. The wavelength coverage is $4760{\AA}$ $-5558{\AA}$, which includes emission lines, $H{\beta}4861{\AA}$, $[OIII]4959{\AA}$, and $[OIII]5007{\AA}$. We observe that forbidden lines have both narrow and broad components. Radial velocity of NGC 4051 is blue-shifted, perhaps due to the z value derived by the earlier studies, 0.002336. We use the revised z, 0.002099, according to the radial velocity of the central spectrum. NGC 4051 is face-on galaxy without rotation observed. Radial velocity of Mrk 79 shows a rotation characteristic in narrow components, relative to $PA=60^{\circ}$, red-shifted to north-west, and blue-shifted to south-east. In the [OIII] broad components, blue-shifted points are observed at the place at 2 arcsec apart from the center of Mrk 79 to north-west, which are likely to be gas outflow.

• Journal of Oral Medicine and Pain
• /
• v.9 no.1
• /
• pp.139-145
• /
• 1984

A Kinematical study of bite force during voluntary isometric contraction was investigated in 20 Korean women with TMJ dysfunction and 50 Korean women a normal subject, ranging from 19 to 29 years old. The author observed maximal bite force, slope of bite force graph, curve index and duration of maximal bite force by way of the foil strain guage(MPM-3000) and Dymograph(Beckman). The obtained results were as follows : 1. Maximal bite forces were 26.48kg and 21.38kg for left and right side of normal subject and 12.85kg and 20.70kg for affected and mon-affected side of TMJ dysfunction patients. 2. The slope of bite force graph were 64.69。and 63.83。 for left and right side of normal subject and 53.14。and 69.57。for affected and non-affected side. 3. The curve indexes were 0.54 and 0.80 for left and right side of normal subject and 2.30 and 0.60 for affected and non-affected side. 4. The duration of maximal bite force were 383.12 msec and 393.60 msec for left and right side of normal subject and 345.30 msec and 312.25 msec for affected and non-affected side.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.323-330
• /
• 2016

This paper describes real-time unbalance moment compensation method for line of sight(LOS) stabilization control systems. The factors of system inertia, frictions and unbalance moment affect the control accuracy of drive systems that are equipped to on the move(OTM) platforms requiring LOS stabilization function. In case of the unbalance moment among those factors is continuously changed as variation of relative angle between gravity vector and drive torque vector. Then, consideration of the effect in real-time is very complicate. Therefore, its effect should be designed to be minimized, however, designing it almost zero is impossible in real condition. In other words, it is hard to achieve target performance overcoming stability issue of highly unbalanced systems. To solve these problems, this paper proposes calculation method of unbalance moment by using measured sensor data for LOS stabilization control and its use for control compensation. Also, kinematical converting process and control structure for compensation are explained. The effectiveness of the proposed method as variation of unbalance moment is verified under simulation circumstance modeled by assuming LOS control system with 2-axis gimbal structure.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3E
• /
• pp.87-89
• /
• 2005

The acoustical sources of intake and exhaust systems in fluid machines are often characterized by the source impedance and strength using linear frequency-domain modeling. In the case of the sources which are nonlinear and time-variant, however, the source parameters were sometimes incorrectly obtained. In this paper, the source model and direct measurement technique are modified in order to evaluate the effect due to nonlinear and periodically time-varying source character as well as the linear property of the reflectivity of in-duct fluid machine source. With a priori known kinematical information of the source, the types of nonlinear time-variant terms can be presumed by a simple physical model, in which there is practically no restriction on the form of the model. The concept of source impedance can be extendable by introducing the linear frequency response function for each nonlinear or time-variant input. Extending the conventional method and adapting the reverse MISO technique, it is possible to develop a direct method that can deal with the nonlinear time-variant source parameters. The proposed direct method has a novel feature that there is no restriction on the probability or spectral natures of the excited sound pressure data. The present method is verified by the simulated measurements for simplified fluid machines. It is thought that the proposed method would be useful in predicting the insertion loss or the radiated sound level from intake or exhaust systems.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.429-440
• /
• 2007

The purpose of this research is to develop the Human-centered CAD system in which human factors can be considered during the design stage. For this system there are several issues to research, like the digital human modeling technology, the definition of interactions between human and product, the simulation of human motion when using the product, and the bio-mechanical analysis of human, etc. This paper introduces how to construct the kinematical structure of the digital human model. For our digital human model H-ANIM, the international specification of humanoid animation is referenced. And we added the skeleton geometry and the skin surfaces to our model. And it can manipulate its joints by forward kinematics. Also the IKAN inverse kinematics algorithm is adopted to support the posture prediction of the digital human model in the product environment. All of these ideas are implemented using CAD API so that we can apply these functions to the current commercial CAD systems. In this manner, the human factor issues can be effectively taken into account at the early design phase and the costs of bio-mechanical evaluation will be significantly reduced.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.109-120
• /
• 2006

The purpose of this study was to examine the kinematical characteristics of gymnasts who can perform the KOVACS skill, and to grope for the better KOVACS Piked motion. The subjects were 3 male national gymnasts and were filmed with video cameras. And kinematic data were collected from the event of maximum knee flexion to the re-grasp the bar after airborne motion during KOVACS Piked motion. And the following conclusion were drawn; S1 took the enough time and inadequate height for performing KOVACS Piked motion. S2 showed the inadequate time and height during airborne motion with the large forward-backward and left-right movement. S3 showed the better KOVACS Piked movement among gymnasts, but the weak point of S3 was the large left-right shift. Based on the above conclusions, the gymnasts should be trained the enough time and height for the effective airborne movement and to reduce the left-right movement.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.135-144
• /
• 2006

This study was to investigate the kinematic analysis to score of the Yurchenko stretch skill according to phases in a horse vaulting. For this study, 8 male national gymnasts were participated in acquiring three dimensional kinematical imagining data with four Sony PD-150 video cameras After digitizing motion, the Direct Linear Transformation(DLT) technique was employed to obtain 3-D position coordinates. The kinematic factors of the distance, velocity and angle variable were calculated for Kwon3D 3.1. The following conclusions were drawn; 1) The COG resultant velocity of the less skilled group decreased in PRF phase because the less skilled group had a larger flexion-knee angle than the skilled group in BC phase, Because the less skilled group had larger flexion-shoulder angle than the skilled group in HTO phase, At blocking movement, the body inclined a moving direction. By means of it, COG lowered 2) The skilled group had a more rapid COG's vertical velocity than the less skilled group at HTD and HTO event in HC phase, because this was performed the blocking movement with body angle and contacted on a horse vaulting small and its time short by means of contacting hands on a horse vaulting quickly. Such blocking movement made the vertical up-flight movement easy at POF phase bringing out rapid COG's vertical velocity after take off a horse vaulting.