• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.299-306
• /
• 2016

본 논문에서는 센서 네트워크를 이용하여 의사의 동작을 흉내 낼 수 있는 내시경 취급로봇의 형상 예측방법이 제안된다. 3축 지자기계와 3축 가속도 계로 이루어진 단위센서가 CAN버스 통신을 통하여 네트워크를 구성한다. 각각의 센서 유니트는 연성 튜브로 만들어진 로봇의 길이방향 위에 있는 점들의 각들을 검출하는 데 사용된다. 센서 네트워크로부터 수신된 신호들은 Butterworth lowpass filter를 이용하여 필터링 된다. 여기서 우리는 노이즈 제거를 위하여 버터워쓰 필터를 설계하였다. 최종적으로 로패스 필터에 의하여 노이즈가 걸러진 신호들을 처리하여 Euler 각이 추출된다. 이 Euler 각을 이용하여 sensor network 상에 있는 각 센서의 위치가 추정된다. 우리는 로봇 바디가 링크와 관절들로 구성되어 있다고 가정한다. 그러면 각 센서의 위치는 각 링크의 중심에 부착되어 있는 것으로 가정할 수 있다. Euler 각과 kinematics chain model로부터 링크의 위치를 결정할 수 있다. 각 링크를 매끈하게 연결할 수 있도록 하기 위해 각 센서의 위치사이에 보간이 수행되어 최종적으로 작동 중에 있는 내시경의 최종형상이 얻어진다. 실험 결과는 제시된 센서 네트워크에서 추정된 Euler angle과 kinematic chain model을 이용하여 추정된 serial link의 형상으로부터 내시경형상을 가시화 할 수 있음을 보여준다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.31-41
• /
• 2006

The primary purpose of a TKA is to restore normal knee function Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from climbing stairs; (b) provide adequate knee joint stability. A 16-channel MyoResearch XP EMG system was used to collect the differential input surface electromyography signals VM, VL, RF, BF, ST during climbing/descending stair tests. A Peak Motion Measurement System was used to collect the kinematic and kinetic data. AKIN-COM Ill isokinetic dynamometer was used for EMG of VM, VL, RF, BF and ST during maximal voluntary contraction. I Quadriceps EMG results for the VM of the passed 1year group limb demonstrated significant less RMS EMG than that of the passed 3year group limb $60^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The VL of the passed 1year group limb also demonstrated significants less RMS EMG than that of the passed 3year group limb from $60^{\circ}-45^{\circ}$ of knee flexion(p<0.05). Similar to the VM and VL, the RF of the passed 1year group limb showed less RMS EMG than that of the passed 3year group limb from $60^{\circ}-30^{\circ}$ do knee flexion(p<0.05). Hamstring EMG results for the BF of the passed 1year group limb demonstrated less RMS EMG than that of the passed 3year group limb from $75^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The passed 1year group limb tended to have less ADD displacement(p<0.071) than that of the passed 3year group limb. There was no significant difference of the ABD displacement between the passed 1year group and the passed 3year group limbs(p<0.73). The passed 3year group used compensatory adaptation movement strategies to compensate for the strength deficit of passed 3year group limbs. The passed 3year group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. The passe 3year group limb might have an unstable knee joint in the medio-Iateral direction during the climbing/descending by showing a tendency of more ADD displacement and greater hamming co-activation EMG than the passed 1year group limbs. The TKA design was not able to help the knee joint to produce adequate knee extension moment with less quadriceps muscle effort. I think that old man needs continuous exercise for muscle strength.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 동계 학술대회 논문집
• /
• pp.23-28
• /
• 2002

본 연구에서는 간단한 조작을 통하여 작물의 특성에 따라 진동방향을 조절 가능하게 함으로써 물리적 성질이 서로 다른 감자, 고구마, 마늘, 양파, 생강 등 거의 모든 뿌리작물의 수확에 이용할 수 있는 다목적 굴취기를 기구학적으로 설계하고, 뿌리작물 굴취기의 성능에 영향을 미치는 진폭, 진동수, 작업속도를 변화시킬 때 각각의 조합에 있어서 굴취판상의 특정한 점들의 운동궤적을 분석하고 이에 기초하여 굴취기의 설계변수와 작업에서의 설정변수 를 결정하고자 하였으며, 그 결과를 요약하면 다음과 같다. 1) 작업위치에 따라 굴취판 뒷부분(선별부)의 진동방향 조절이 가능하기 때문에 진동방향을 조절하면 물리적 성질이 서로 다른 감자, 고구마 마늘, 양파 등 거의 모든 뿌리작물의 수확에 이용할 수 있을 것으로 사료된다. 2) 굴취판의 궤적분석결과 진폭이 3mm일 때에는 캠 축의 회전속도와 작업속도에 관계없이 굴취작업이 불가능할 것으로 판단되었다. 진폭이 6mm일 때에는 작업속도 1.08km/hr에서 캠 축의 회전속도가 841rpm 이상이면 굴취작업이 가능할 것으로 판단되었고, 작업속도 2.16km/hr이상에는 굴취작업이 불가능할 것으로 판단되었다. 진폭이 9mm일 때에는 작업속도 1.08km/hr에서 작업할 때 사용한 캠축의 회전속도에 관계없이 굴취작업이 모두 잘 이루질 것으로 판단되었고, 작업속도 2.16km/hr에서는 캠축의 회전속도가 995rpm 일 경우에만 굴취작업이 가능할 것으로 판단되었으며, 작업속도 3.24km/hr에서는 작업위치나 캠축의 회전속도에 관계없이 모두 굴취작업이 불가능한 것으로 사료된다. 3) 작업속도를 1.08km/hr 이상으로 하려면 소요동력의 관점에서 볼 때 진폭은 크게하고 진동수는 작게 하는 것이 유리하기 때문에 진폭을 9mm이상 취하는 것이 바람직할 것으로 사료된다.회로 가장 많이 발생하였으며, 다음으로 밀양과 나주지역이 29회, 김제지역이 28회 등으로 많은 발생빈도를 보였다.생시 진화방법의 개발 등에 대한 기본data로서의 역할을 충분히 할 수 있을 것으로 사료된다. 평가되었다.us에 대하여 높은 것으로 나타났다.bangular에서 subrounded에 해당한다. 이러한 현저한 차이를 보이는 이유는 남극적 빙하성 환경 조건과 이 지역의 해양 퇴적학적 특성에 그 원인이 있다고 해석된다.ea. Our ancestors really began to drink teas from the period of Unified Sila on. This country turning to the Koryo dynasty, tea drinking manner began to prevail so much that drinking tea became a ceremony. Daring the Yi dynasty it was much camplicated to make and boil the leaf tea. As a result of the previous fact pure tea came to have disappeared and odorous pharmaceutical became prevailent. 7) For value of exploiting Kungjuk tea (ginger tea seasoned with phyllostachy and addition of honeyl) was the highest among many. The worth of developing all the teas among all the beverages was regarded as that high of 51%, while even the tea regarded as worthless obtai

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제23권2호
• /
• pp.91-99
• /
• 2023

Background: Extrusion of debris is a major factor that results in postoperative pain during root canal treatment with various instruments and instrumentation techniques. Therefore, instrumentation techniques that extrude minimal debris into the periapical area while reducing pain are desirable. This study aimed to compare the incidence of postoperative pain and intake of analgesic medication (frequency and quantity) after endodontic treatment of mandibular posterior teeth using two single files and full-sequence continuous rotary systems with different kinematic motions. Methods: Thirty-five of 105 patients were assigned equally to three groups according to the instrumentation system used: ProTaper Next (PN) X2, 25/06 (Dentsply, Maillefer, Ballaigues, Switzerland), One Shape (OS), #0.25/06 (Micro Mega, Besancon, France), and Wave One Gold (WG), Red - #0.25, 0.07 (Dentsply, Maillefer, Ballaigues, Switzerland). Five specialists were included in this study design; each professional prepared 21 teeth, and randomly selected 7 per instrument system. The VAS sheet ranging from 0 to 10 was used to record the initial and postoperative pains at 24, 48, and 72 h, and 7^th day after single visit endodontic treatment in mandibular premolars and molars with a diagnosis of asymptomatic irreversible pulpitis with or without apical periodontitis. Postoperatively, an analgesic, ibuprofen 400 mg was administered for intolerable pain at a dose of 1 tablet for 6 h. The patients were asked over the telephone regarding postoperative pain at intervals of 24, 48, and 72 h, and 7^th day using a visual analogue scale. Result: There were no statistically significant differences among the PN, OS, and WG systems (P > 0.05) with regard to the incidence of postoperative pain at any of the four time points assessed. Conclusion: The intensity of postoperative pain, frequency, and analgesic intake were similar across all three types of instrument systems; however, the reciprocating single file (WG) was associated with less postoperative pain than the full sequence continuous rotary file.