• 대한공간정보학회지
• /
• 제10권5호
• /
• pp.75-80
• /
• 2002

Depending upon geographical features and surrounding errors in the survey field, inaccurate positioning is inevitable in a kinematic DGPs survey. Therefore, a data inaccuracy detection algorithm and an interpolation algorithm are essential to meet the requirement of a digital map. In this study, GPS characteristics are taken into account to develop the data inaccuracy detection algorithm. Then, the data interpolation algothim is obtained, based on the feature type of the survey. A digital map for 20km of a rural highway is produced by the kinematic DGPS survey and the features of interests are lines associated with the road. Since the vertical variation of GPS data is relatively higher, the trimmed mean of vertical variation is used as criteria of the inaccuracy detection. Four cases of 0.5%, 1%, 2.5% and 5% trimmings have been experimented. Criteria of four cases are 69cm, 65cm, 61cm and 42cm, respectively. For the feature of a curved line, cublic spine interpolation is used to correct the inaccurate data. When the feature is more or less a straight line, the interpolation has been done by a linear polynomial. Difference between the actual distance and the interpolated distance are few centimeters in RMS.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.103-110
• /
• 2002

The position fixing usually is determined by triangulation, traverse surveying and astronomy surveying. However, when the station is moving, it is impossible to determine its position continuously by the former method. By a satellite positioning method(GPS), this problem can be solved. In our study, we used two methods to determine the length and coordinate of a point position. One is a kinematic GPS method and the other is a static one. Each is based on carrier phase measurement and employs a relative position technique. We implemented observation experiments such as Geodimeter and DGPS(Differential GPS) successfully. To estimate the accuracy between the kinematic and static methods, we compared the results of Geodimeter, the kinematic, and the static. The results showed that the static is relatively a little more accurate than the kinematic. However, in the kinematic mode, when we received the GPS data for a long time, we found that the kinematic also had a high accuracy value for the length survey Finally, we applied the GPS to Jeju Harbor Breakwater to examine the applicability of GPS for coastal ocean structure based on the kinematics and the statics, respectively.

• 지구물리와물리탐사
• /
• 제6권1호
• /
• pp.23-27
• /
• 2003

호저에 매몰되어 있을 가능성이 있는 미폭발 매설물의 탐지를 위해 수상자력탐사를 수행하였다 자력계는 2개의 총자력계를 이용한 자력변화율측정기(magnetic gradiometer)를 사용하였으며, 수상에서의 위치 측정은 실시간 이동측량(real time kinematic survey)으로 수행하였다. 위험물의 크기를 가정하여 예상 이상반응을 계산하고 이들에 대한 탐지 가능성을 살펴보았다. 조사선의 면적이 좁아 조사선 및 자력계 외 다른 장비의 자성이 측정에 영향을 미쳤으며 이들은 조사선의 방향이 바뀜에 따라 크기의 변화가 있었다. 이들은 이동평균법에 기초하여 영향을 제거하도록 하였다. 탐사결과 호저에 매설되어 있는 관로의 노선이 파악되어 탐지능력을 간접적으로 확인할 수 있었다.

• 대한수학회지
• /
• 제38권4호
• /
• pp.711-722
• /
• 2001

We survey recent results on the inverse kinematic problem arising in geophysics. The question is whether one can determine the sound speed (index of refraction) of a medium by measuring the travel times of the corresponding ray paths. We emphasize the anisotrpic case.

• 한국측량학회지
• /
• 제20권4호
• /
• pp.389-398
• /
• 2002

컴퓨터와 정보통신의 발달로 토지정보의 필요성이 날로 증가됨에 따라, 신속하고 정확하게 지적.지형정보를 갱신할 수 있는 위성측량 시스템에 많은 관심이 모아지고 있다. 지적기준점들은 1910년대 측량기술의 한계 및 6.25 동란 등으로 대부분이 망실되었으며 재설치 과정에서 많은 문제점이 발생되어, 기준점의 재 정비 및 일필지 측량 등에서 신속하고 정확한 측량 방법이 요구되고 있다. 본 연구는 지적분야에서 GPS 측량의 효율성을 높이기 위해, GPS를 지적에 적용할 경우 제기될 수 있는 제반 문제점들을 파악.분석하여 GPS 측량 방향을 제시하고, 이동측량을 지적분야에 효율적으로 적용하기 위해 GPS 이동측량 프로그램을 개발하고자 한다. 연구결과, 상시관측소와 삼각점을 기준으로 광주지역 지적기준점들의 정도를 확인할 수 있었고, 지적기술연구소의 좌표변환 프로그램을 이용하여 기존의 지적측량성과와 유사한 결과를 얻을 수 있었으나, 가우스상사이중투영 방법에 따라 기존성과와 수십cm의 차이가 날 수 있기 때문에 평면좌표로 변환시 주의가 요망됨을 알 수 있었다. 그리고, 상용프로그램과 비교하여 개발된 GPS 이동측량 프로그램의 실용성을 확인할 수 있었으며. 이는 수치지적측량과 지적도 갱신에 활용될 것으로 기대된다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.221-233
• /
• 2016

This paper deals with performance assessment of the kinematic network-based GPS positioning technique with a view to using it for ellipsoidally referenced bathymetric surveys. To this end, two field trials were carried out on a land vehicle and a surveying vessel. Single-frequency GPS data acquired from these tests were processed by an in-house software which equips the network modeling algorithm with instantaneous ambiguity resolution procedure. The results reveals that ambiguity success rate based on the network model is mostly higher than 99.0%, which is superior to that of the single-baseline model. In addition, achievable accuracy of the technique was accessed at ${\pm}1.6cm$ and 2.7 cm with 95% confidence level in horizontal and vertical component respectively. From bathymetric survey at the West Nakdong River in Busan, Korea, 3-D coordinates of 2,011 points on its bed were computed by using GPS-derived coordinates, attitude, measured depth and geoid undulation. Note that their vertical coordinates are aligned to the geoid, the so-called orthometric height which is widely adopted in river engineering. Bathymetry was constructed by interpolating the coordinate set, and some discussion on its benefit was given at the end.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.45-49
• /
• 2004

The Navstar Global Positioning System(GPS) is an advanced navigation satelite system for determination of position, velocity and time. It can provide three-dimensional positioning on a global basis, independent of weather, 24 hours per day. Test results show that the carrier phase and pseudorange corrections are suitable for a kinematic GPS system. Using these corrections are more effective than using raw GPS data, since fewer bits are required for transmission Additionally, the number of computation required at the rover is reduced when corrections, rather than raw measurement are transmitted

• 한국측량학회지
• /
• 제26권5호
• /
• pp.493-504
• /
• 2008

SBAS(Space-Based Augmentation System)는 광역보정항법시스템(WADGPS, Wide Area DGPS)으로써 지역 보정항법시스템(LADGPS, Local Area DGPS)의 단점을 보완한 위성항법 보정시스템이다. 이 연구에서는 GPS 측위의 대표적인 방법인 실시간 이동측위(RTK; Real-Time Kinematic), DGPS(Differential GPS) 측위, 단독측위(Standalone)와 SBAS 이동측위를 실시하고 그에 따른 측위 정확도 비교를 통해 SBAS 이동측위의 성능을 분석하였다. 정지측위 결과 산출한 좌표를 참값으로 간주하였고, 각각의 측위방법으로 획득한 관측데이터를 참값과 비교하여 계산한 2차원 평균제곱근(RMS: Root Mean Square)오차와 3차원 RMS 오차를 정확도 비교의 지표로 사용하였다. 그 결과, 각 측위방법에 따른 3차원 RMS 오차는 RTK 측위 13.1cm, DGPS 측위 126.0cm, 이중주파수 단독측위 135.7cm, 단일주파수 단독측위 428.9cm, 그리고 SBAS 측위 109.2cm로 나타났다. 이를 통해 SBAS 측위의 정확도가 DGPS 측위 정확도와 대등한 수준임을 확인할 수 있었다.

• 천문학회보
• /
• 제42권2호
• /
• pp.80.2-80.2
• /
• 2017

We present chemical and kinematic properties of the Milky Way's halo system investigated by carbon-enhanced metal-poor (CEMP) stars identified from the Sloan Digital Sky Survey. We first map out fractions of CEMP-no stars (those having no over-abundances of neutron-capture elements) and CEMP-s stars (those with over-enhancements of the s-process elements) in the inner- and outer-halo populations, separated by their spatial distribution of carbonicity ([C/Fe]). Among CEMP stars, the CEMP-no and CEMP-s objects are classified by different levels of absolute carbon abundances, A(C). We investigate characteristics of rotation velocity and orbital eccentric for these subclasses for each halo population. Any distinct kinematic features identified between the two categories in each halo region provide important clues on the origin of the dichotomy of the Galactic halo.

• 제어로봇시스템학회논문지
• /
• 제20권3호
• /
• pp.333-344
• /
• 2014

This is the survey paper on the role of kinematics in robot development. The robot is considered as a form of mechanical systems which includes closed-chain loop system, open-chain loop system and closed and open switching system. To analyze these systems, kinematic notations has been developed in kinematics of mechanical theory since 1955 and has been applied in robotics. Several kinematic notations including Denavit-Hartenberg notations have been reviewed. The status of development of the spherical motor which has a great impact on the future robot advancement has reviewed, and research activity on a spherical motor and its application to 3-D spatial mechanisms at UNIST is introduced. For the open and closed switching mechanical systems, the bipedal robots' walking theories using Zero Moment Point are reviewed. And current status regarding bipedal robots based on newly developed passive dynamic walking theory is reviewed with the research activity at UNIST on this subject.