• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.11-12
• /
• 2008

본 논문에서는 전력IT 국책과제로 선정된 한국형 에너지 관리시스템(Korean Energy Management System, K-EMS)의 네트워크 해석 프로그램 중 하나인 급전원 조류계산(Dispatcher Power Flow, DPF) 프로그램의 구축 및 통합에 대해서 다룬다. 여기에서는 조류계산의 기본기능 보다는 실시간 운영을 위한 DB, 프로세스, 화면 간 연계방법을 설명하고, 기존 Off-line 검토용 조류계산 프로그램과의 차이점 및 급전원 조류계산 환경에 대해 서술한다. 본 논문에 소개된 급전원 조류계산 프로그램은 K-EMS의 중간 결과물인 Baseline 단계의 성과이며, 국내 실계통 데이터를 취득하여 성공적으로 실증시험을 마친 결과임을 밝혀둔다.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.2
• /
• pp.146-149
• /
• 2005

Most primary spinal abscesses, irrespective of pathogens and anatomical locations, have better prognosis than that of secondary abscesses with spondylitis. We report a 68-year-old man, previously undertaken pulmonary resection due to tuberculosis, presented with paraparesis. Imaging studies showed primary intraspinal abscesses at T-1 and T-3 vertebral levels, semi-invasive pulmonary Aspergillosis and inflammation of the posterior mediastinum. Operative procedure and histopathological examination revealed interdural Aspergillus abscess. Despite chemotherapy, he deteriorated progressively, and spondylitis developed at corresponding vertebrae. He eventually died 6 weeks postoperatively due to pulmonary complication. The authors intended to inform that such an extradural inflammatory lesion of Aspergillus abscess should be treated carefully.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.170-173
• /
• 2010

최근 진보된 무선 통신 기술과 발전된 의료 기술로 인하여 u-Health의 핵심 기술인 WBAN에 대한 연구가 활발히 진행되고 있다. 인체에 이식 가능한 WBAN 장치는 전원 공급에 제한이 있으므로 소비전력을 최소화하기 위한 MAC 프로토콜이 필요하다. 본 논문은 WBAN 장치의 다양한 무선 통신 특성을 적용한 시뮬레이터에 관한 것으로 MICS 대역의 채널 특성을 적용하였고, 데이터의 신뢰성과 에너지 효율성을 향상시키기 위해 가변 패킷 및 비트맵 기반의 패킷 블록 전송기법을 적용한 MAC 프로토콜을 사용한다.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.71-76
• /
• 2012

Computational fluid dynamics (CFD) is nowadays a powerful and reliable tool for simulating different flow processes and temperature. CFD is used to analyze the various pot geometries and operative variables in 55% Al-Zn pot of CGL. In this research, different strip velocities were assumed and then shown the flow pattern in the pot that was similar in the different strip velocities. Temperature distribution in the pot depended on inductors and inlet strip temperature at the steady condition. Generation of dross particles and transport models were considered to describe dross particles evolution inside the pot. In order to observe dross influence by scrap location, dross particles were generated upon the sink roll. Floating time of dross particles is different by scraper locations above the sink roll.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.231-238
• /
• 1999

Most of the irrgation structures are shortage of feasible facility management. The surveyed data to irrigation structures related to maintenance record were built and interface program between GIS and database were developed . It was conducted to develope a system for safe appraisal and repair works on agricultural irrigation structures. The system assisting onsite field investigation and determining the typical rehabilitation method of typical agricultural structural problems such as fractures and cracks of members was developed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.921-927
• /
• 2013

This paper presents a user interface for vision based indirect teaching of a robotic manipulator with Kinect and IMU (Inertial Measurement Unit) sensors. The user interface system is designed to control the manipulator more easily in joint space, Cartesian space and tool frame. We use the skeleton data of the user from Kinect and Wrist-mounted IMU sensors to calculate the user's joint angles and wrist movement for robot control. The interface system proposed in this paper allows the user to teach the manipulator without a pre-programming process. This will improve the teaching time of the robot and eventually enable increased productivity. Simulation and experimental results are presented to verify the performance of the robot control and interface system.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.801-803
• /
• 2000

The large scale magnets like thermalnuclear fusion devices are necessary for superconducting CICC cable, When the Cable In Conduit Conductors(CICC) is occurred by the external turbulence, the CICC occurs to quench, The CICC can be broken because the CICC spends all energy in the quench-happened spot. Therefore, it is necessary to develop measurement systems of the quench detection. The measurement systems of the relative good degree of efficiency are the voltage tap sensors. The weak points of voltage tap sensors are effected by EMF noise and inductance. The thermalnuclear fusion devices easily can't measure inductance value because of plasma current. In the experiment, The value of inductance was estimated by FEM techniques and the decrement of Inductance value measured as long as remaining plasma current.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2368-2370
• /
• 2000

In this paper, we proposed an inverse hysteresis model to cancel the nonlinear hysteresis phenomenon of a piezoelectric actuator and design a feedback control system based on the inverse hysteresis model. The piezoelectric actuator performs much better in open-loop response. However, the nonlinear hysteresis phenomenon should be linearized and the closed-loop control should be executed to get the required performance in the area, where high-speed and high-accuracy are required. Thus, it is shown by simulation that a good position tracking performance can be obtained for the repetitive desired position trajectory.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2070-2071
• /
• 2007

본 연구에서는 변압기의 주 소음원인이 되는 120[Hz]와 240[Hz]및 360[Hz] 주파수에 대한 다중음/단일채널 적응 능동제어기법을 이용한 능동 제어시스템을 구성하였다. 이 능동 제어시스템을 이용하여 변압기에서 발생되어 나오는 소음을 저감시켰고 모의실험을 통해 소음이 감쇄되는 것을 확인하였다.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.2
• /
• pp.88-93
• /
• 2016

Dirofilaria immitis is a filarial nematode parasite that causes cardiopulmonary dirofilariasis in dogs. The purpose of this study was the development of real-time PCR assays for efficient detection of D. immitis. The D. immitis-specific primers confirmed in our previous study and a newly designed TaqMan probe were used for quantitative diagnostics. First, SYBR Green real-time PCR was performed using the specific primers and serially diluted genomic DNA or plasmid DNA, and melting curve analyses were performed after amplification. The melting curve showed one specific peak in each of the genomic and plasmid DNA reactions, suggesting that the primers specifically amplify the D. immitis cytochrome c oxidase subunit I gene. Comparison of SYBR Green and TaqMan real-time PCR using serially diluted plasmid DNA showed higher efficiency and specificity with TaqMan real-time PCR. The real-time PCR assays developed in this study will provide improved diagnostic methods to overcome the limitations of conventional diagnostic tools and facilitate more rapid and accurate diagnoses.