• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.557-564
• /
• 2009

The objective of this study is to efficiently recover phosphorus contained in sewage sludge by a struvite-forming method. The performances were evaluated under various operating conditions(elution with the kind of acid, Mg-compound and temperature) in order to reach the optimum conditions of struvite-forming. As a result, as an elution solution, the elution efficiency of $H_2SO_4$ was 2.65 times higher than that of HCl. Also, the precipitation efficiency of struvite was the highest (97.4%) in case of using $MgCl_2{\cdot}6H_2O$ as Mg-compounds at $25^{\circ}C$. However, the side reaction by Fe, Al and Zn appeared in process of phosphorus recovery. To solve some problems caused by side reacton, large quantities of co-precipitation materials produced by side reaction were removed by precipitating phosphorus compounds in pH 7. Consequently, the recovery efficiency of phosphorus by a struviteforming method was 82.99%, and purity of the recovered struvite product was high.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.93-101
• /
• 2019

Nucleotides play important roles in numerous intracellular biochemical processes and are used in infant formulas and other dairy products. However, domestic analytical methods for assessing nucleotide content in products have not yet been established, and therefore, methods for determining nucleotide content are urgently required. A rapid and simple analytical method for determining the content of five types of nucleotides in dairy products was improved using solid phase extraction clean-up and high-performance liquid chromatography with diode array detector. The extraction solvent used in the AOAC method was not well dissolved and was changed to hydrophilic EDTA-Na. In addition, the results obtained using the isocratic elution method and a single wavelength were similar to those obtained using the AOAC method, and the time taken for analysis was shortened from 40 min to 25 min. The process of method validation revealed the following parameters: accuracy (84.69%-102.72%), precision (1.51%-6.82%), linearity (0.999), and limit of detection (cytidine 5'-monophosphate, 0.09 mg/L; uridine 5'-monophosphate, 0.11 mg/L; adenosine 5'-monophosphate, 0.12 mg/L; guanosine 5'-monophosphate, 0.11 mg/L; and inosine 5'-monophosphate, 0.14 mg/L). The method was also used to determine the nucleotide concentration in 25 samples (infant formulas, 1.99-29.39 mg/100 g; and cow milk, 0.28-0.83 mg/100 g). The newly improved method was appropriate for analyzing nucleotides in infant formulas and other dairy products faster when compared to conventional methods.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.97-105
• /
• 2019

In the current steel structures of high-rise buildings, high heat input welding techniques are used to improve productivity in the construction industry. Under the high heat input welding, however, the microstructures of the weld metal (WM) and heat-affected zone (HAZ) coarsen, resulting in the deterioration of impact toughness. This study focuses mainly on the effects of fine TiN precipitates dispersed in steel plates and B addition in welding materials on grain refinement of the HAZ microstructure under submerged arc welding (SAW) with a high heat input of 200 kJ/cm. The study reveals that, different from that in conventional steel, the ${\gamma}$ grain coarsening is notably retarded in the coarse grain HAZ (CGHAZ) of a newly developed steel with TiN precipitates below 70 nm in size even under the high heat input welding, and the refinement of HAZ microstructure is confirmed to have improved impact toughness. Furthermore, energy dispersive spectroscopy (EDS) and secondary-ion mass spectrometry (SIMS) analyses demonstrate that B is was identified at the interface of TiN in CGHAZ. It is likely that B atoms in the WM are diffused to CGHAZ and are segregated at the outer part of undissolved TiN, which contributes partly to a further grain refinement, and consequently, improved mechanical properties are achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.4
• /
• pp.3-15
• /
• 2008

In 2000, Song. et. al. firstly proposed the Searchable Keyword Encryption System that treated a problem to search keywords on encrypted data. Since then, various Searchable Keyword Encryption Systems based on symmetric and asymmetric methods have been proposed. However, the Searchable Keyword Encryption Systems based on public key system has a problem that the index size for searching keywords on encrypted data increases linearly according to the number of keyword. In this paper, we propose the method that reduces the index size of Searchable Keyword Encryption based on public key system using Bloom Filter, apply the proposed method to PEKS(Public key Encryption with Keyword Search) that was proposed by Boneh. et. al., and analyze efficiency for the aspect of storage.

• Molecules and Cells
• /
• v.46 no.8
• /
• pp.513-525
• /
• 2023

Orange carotenoid protein (OCP) of photosynthetic cyanobacteria binds to ketocarotenoids noncovalently and absorbs excess light to protect the host organism from light-induced oxidative damage. Herein, we found that mutating valine 40 in the α3 helix of Gloeocapsa sp. PCC 7513 (GlOCP1) resulted in blue- or red-shifts of 6-20 nm in the absorption maxima of the lit forms. We analyzed the origins of absorption maxima shifts by integrating X-ray crystallography, homology modeling, molecular dynamics simulations, and hybrid quantum mechanics/molecular mechanics calculations. Our analysis suggested that the single residue mutations alter the polar environment surrounding the bound canthaxanthin, thereby modulating the degree of charge transfer in the photoexcited state of the chromophore. Our integrated investigations reveal the mechanism of color adaptation specific to OCPs and suggest a design principle for color-specific photoswitches.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.356-360
• /
• 2009

Purpose: Lipofibromatous Hamartoma(LFH) of nerve is a tumor - like lipomatous process principally involving the young persons. This is rare disease characterized by a soft slowly growing mass surrounding and infiltrating major nerves and their branches of the palm and digits. LFH of nerve usually affects the median nerve, with the most common sites of presentation being the distal forearm and hand in the wrist or palm. It may cause symptoms of compression neuropathy and is associated with macrodactyly. Recently, MRI plays a major role in confirming the diagnosis of LFH. Therefore, we present two cases of LFH in the hand with MRI features and surgical management. Methods: One is 6 - years - old female who presented with macrodactyly involving both the soft tissue and bony parts of the second, third and forth digits of her right hand. The other one is 16 - years - old man who presented involving the soft tissue of the second and third digits of his right hand, with pain and numbness, along with motor and sensory deficits in the median nerve distribution. To evaluation about LFH, we enforced preoperative MRI and physical examination. After confirming the diagnosis of LFH, we proposed decompression of all compromised peripheral nerve to help alleviate pain and paresthesia to reduce the likelihood of permanent motor and sensory sequelae. Results: A characteristic feature on MRI is the appearance of serpentiform nerve fascicle surrounded by fibro - fatty tissue within the expended nerve sheet. Distribution of fat between fascicles is asymmetric. Two cases were treated by limited debulking of the redundant tumor tissue and excision of epineurial fatty tissue. These cases were performed with relief of symptom. Conclusion: MRI not only confirms the diagnosis, it also provides a detailed assessment of nerve involvement preoperatively. Especially, on coronal images, the nerve has a spagetti - like appearance that is pathognomonic of LFH. Recommendations for early treatment include decompression of the carpal tunnel, debulking of the fibro - fatty sheath, microsurgical dissection of the neural elements and excision of involve nerve with or without grafting.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.2
• /
• pp.198-203
• /
• 2005

Patients with acromegaly have high incidence of benign or malignant neoplasia than general population. Around fifteen percent of the deaths reported in acromegaly are attributable to malignancy of cancer. On the whole, mortality in acromegaly has been shown to be correlated with the degree of growth hormone (GH) control. Especially, the levels of insulin like growth factor-1 (IGF-1) may be higher in neoplasm, but there is no clear evidence to prove that tumor development is triggered by IGF-1 in acromegaly. Henceforth, we report a case of acromegaly associated with lung and gastric cancer in a 58-year-old man, suggesting the possible carcinogenic role of IGF-1.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3731-3740
• /
• 2012

Background: There have been few studies of Asian ovarian cancer and benign tumors. The primary aim of this paper was to report the protocol of the Ko-EVE study to examine epidemiological and molecular factors for ovarian cancer and benign neoplasms and to ascertain the major risk factors for ovarian cancer control in Korea. Methods: This case-control study covers incident epithelial ovarian cancers and benign neoplasms, four major centers participating in enrolling incident cases and 3 hospitals enrolling healthy controls among health examinees. Standardized questionnaires were administered by trained interviewers, including sections on socio-demographics characteristics, past medical history, medication usage, family history, lifetime consumption of alcohol and tobacco, diet, physical activity, and reproductive factors for women. Various biological specimens were collected in the biorepository according to the standardized protocol. Annual follow-up for cancer cases and follow-up at the 1st year for benign tumor cases are performing to evaluate treatment effect and progression. Passive follow to see long-term survival will be conducting using record linkage with national data. Results: The total number recruited in 2010-2011 was 246 epithelial ovarian cancer cases, 362 benign epithelial tumors and 345 controls. We are planning to collect subjects for at least 1,500 sets of ovarian cancer, 2,000 benign tumors and 1,500 controls till 2018. Conclusions: The Ko-EVE will provide unique and important data to probe the etiology and natural history of Korean epithelial ovarian cancer. It will be continued by genomic and proteomic epidemiological analyses and future intervention studies for the prevention of ovarian cancer among Koreans.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.537-554
• /
• 2006

This study aims to investigate the distribution of the useful economic plants and the flora of Maninsan. The flora of Maninsan was investigated from March to November in 2003. Vascular plants of this area consist of total 450 taxa; 5 forma, 53 varieties, 392 species, 279 genera, 95 families. It corresponds to 11.1% of totally 4,071 taxa appeared in Korea. Useful plants of this area were investigated 373 taxa. It corresponds to 82.7% of collected plants in this area under our study. Among the useful plants, there are 191 taxa of edible source, 181 taxa of pasture source, 153 taxa of medicinal source, 54 taxa of ornamental source, 18 taxa of timber. Korean endemic plants were composed 10 families, 13 genera, 9 species, 4 varieties and totaling 13 taxa.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.99-104
• /
• 2011

Currently, automotive pre-primed coatings has been developed to overcome environmental regulations and to reduce manufacturing cost in automotive industry. By these reasons, an automotive pre-primed system has been investigated to remove the wash and pre-treatment process using a roll coating application. It is required to develop non-weldable pre-primed system for automotive structural adhesives, because pre-primed sheet coated with organic compounds is hard to be assembled by welding process. Primer 1 (polyester type) and primer 2 (urethane type) were designed to satisfy flexibility and formability for non-weldable pre-primed system. According to the results of physical property test of the primers, adhesion test such as single-lap shear test and T-peel test, primer 1 (polyester type) had better physical properties such as pencil hardness, solvent resistance, flexibility and adhesion with automotive adhesive than that of primer 2 (polyurethane type). In addition, the possibility of the non-weldable pre-primed system was applicable to automotive assembly process in place of welding process.