• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1138-1141
• /
• 2004

고분자 재료에 이온을 주입하면 표면전기저항이 이온주입조건에 따라 $10^{16}\Omega/sq$ 에서 $10^7\Omega/sq$ 까지 변하게 되며, 광학적 특성도 변하게 된다. 이는 산업적으로 대전방지 등에 적용이 가능하며 이러한 신소재 개발을 위하여 산업용 이온빔 표면처리 장치를 제작하고 인출광학을 기초로 이온빔을 제어하여 고분자 재료의 이온주입처리 양산기술을 개발하였다. 본 연구에서는 대면적, 대전류 이온빔 인출을 위한 이온원의 광학적 설계 및 빔라인에서의 솔레노이드 전자석을 이용한 빔프로파일 제어방법을 설명하였다. 사용된 고분자 소재는 PC(PolyCarbonate) 및 PET(PolyEthylene Teraphthalate)이며, 질소이온주입조건은 이온에너지 40-50 keV, 이온주입량 $5\times10^{15}$, $1\times10^{16}$, $7\times10^{16}ions/cm^2$의 조건으로 공정을 수행하였다. 또한 대전방지용 고분자 대량생산을 위한 연속 생산조건과 양산공정조건에 따른 표면전기저항변화를 관찰하였다.

• Korean Journal of Pharmacognosy
• /
• v.18 no.4
• /
• pp.233-240
• /
• 1987

In order to investigate experimentally the clinical effects of Chungsimjeongchun-Tang that have been widely used for cardiac asthma, dyspnea and coughs secondary to the appoplexy and cardiac diseases, the water extract of Chungsimjeongchun-Tang was conducted to the effects on the anti-histamine action and respiratory system in mice, guinea-pigs, rabbits and cats. The following results of Chungsimieongchun-Tang were obtained. Spontaneous motility of the isolated ileum of mice and rabbits was strongly suppressed and contractions of the isolated ileum of mice and guinea-pigs induced by acetylcholine chloride, barium chloride and histamine were remarkably inhibited. Anti-histamine action was noted. Antitussive action on the mechanically irritative cough in cats was recognized. Expectorant action on the leakage of dye in the respiratory tract of rabbits was also shown.

• Journal of Chest Surgery
• /
• v.44 no.2
• /
• pp.159-164
• /
• 2011

Background: Renal cell carcinoma has shown less response to systemic therapies including chemotherapy, radiation, and immunotherapy than other cancers. Surgery has therefore become an important treatment tool. The protocol for treatment is the same for pulmonary metastasis of renal cell carcinoma. We performed surgery for pulmonary metastatic renal cell carcinomas and analyzed the results. Materials and Methods: We retrospectively analyzed 15 patients who had undergone pulmonary metastasectomy from renal cell carcinoma at our hospital from January 2005 to December 2009. Results: No patients had extrathoracic metastatsis. The mean age was 60.2 years (range 35~73). There were 12 male and 3 female patients. The number of synchronous and metachronous patients were 8 and 7, respectively. The mean survival times of synchronous and metachronous patients were 32.6 and 42.9 months, respectively. 6 patients had single lesions and 9 patients had multiple (more than 3) lesions. The surgical procedures included wedge resection (10), lobectomy (2), wedge resection with segmentectomy (2), and segmentectomy (1). Median observation and survival time were 54.1 and 34.9 months. The 1-year and 3-year survival rates were 80% and 50%, respectively. Conclusion: Pulmonary resection for pulmonary metastatic renal cell carcinoma was found to be a safe and effective treatment modality when complete resection was performed.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.5
• /
• pp.291-295
• /
• 2007

Prostaglandin $E_1\;(PGE_1)$ was formulated as two self-microemulsifying drug delivery systems (SMEDDS) composed of Cremophor $EL^{(R)}$ or Cremophor $ELP^{(R)}$ as a surfactant, ethanol as a cosurfactant and Labrafac $CC^{(R)}$ as an oil to develop liquid preparation for the treatment of erectile dysfunction. In pseudo-ternary phase diagram, viscous gel area and microemulsion area were defined. In the measurement of viscosity, the viscosity of two formulations increased gradually upon the addition of water and it decreased from the water contents over 40%. With excessive water, the present systems formed a microemulsion spontaneously. From these results, rte could expect that the present liquid $PGE_1$ SMEDDS formulations might stay within the urethra in the viscous state when contacting the moisture of the urethra and can be easily eliminated by urination. In long-term stability study, we could select one formulation more stable at the shelf storage condition of $4^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2424-2430
• /
• 2012

The current Navigation System for the Visually Impaired Person has a short and limited communication distance and can't receive enough information from Visually Impaired Person to assist directly. In addition, because the path is dangerous and incomplete for the Visually Impaired Person, moving with White Stick is still inconvenient and dangerous. To solve this problem we implement communication that can send and receive video, voice, location information between the Visually Impaired Person's Smart Portable Navigation System Development and assistant's PC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.55-64
• /
• 2010

In this paper, we propose a new compensation scheme for combined channel distortions and RF impairments based on the analysis of the impacts of IQ(In-phase/Quadrature) imbalance and phase noise on the OFDM(Orthogonal Frequency Division Multiplexing) system in the direct conversion transceiver and frequency selective fading channel distortion. The proposed scheme estimates the combined distortion by the use of training symbols and the residual distortion by pilot symbols and compensates the combined distortion, including IQ imbalance, phase noise and multipath fading at the same time. The simulation results show that the proposed scheme compensates the combined distortion of IQ imbalance, phase noise and multipath fading simultaneously.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.869-871
• /
• 2004

This paper presents Single Phase Switched Reluctance Motor Optimum Design using Response Surface Methodology and 2-D Finite Element Method that is coupled with the circuit equation of the rectifier and converter. Moreover, A design process for SPSRM has been proposed. The optimum process has been performed with geometric parameters (${\beta_s}\;&\;{\beta_r}$) that influence the inductance variation for design variables. In this paper, SPSRM performances have been analyzed according to variations of electric and geometric parameters after determining design models in terms of efficiency and power factor maximization.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1519-1520
• /
• 2006

This paper describes a selection and application recommendations of ZnO arresters on DC electric traction vehicles. We measured and analyzed the system voltages applied to arresters and the surge currents flowing arresters on DC electric traction vehicles under operation to decide the Continuous Operating Voltage($U_C$), the Rated Voltage($U_R$), and the Nominal Discharge Current($I_n$). System voltages measured up to 1,800 V during anti-breaking in 1,500 V-system, and surge currents were recorded up to 3 times per running-service-route and their magnitudes were ranges of $150A{\sim}2kA$. From these results and the standard EN50163, we proposed the Continuous Operating Voltage($U_C$) the Rated Voltage($U_R$) for the $1,500V_{dc}$ electric traction vehicles.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.949-950
• /
• 2007

Before applying HTS power device to the real utility system, a system analysis should be carried out by some simulator. PSCAD/EMTDC simulation tool is one of the most popular system analysis. Unfortunately the model component for HTS coil is not provided in the PSCAD/EMTDC simulation tool. In this paper, the model component for the HTS coil has been developed considering the real field data, temperature and magnetic field, of the HTS coil. The numerical model of HTS coil in PSCAD/EMTDC was designed by using the real experimented data obtained from the $AMSC^{TM}$ wire characteristic. The developed model component for HTS coil could be variously used when the power system includes HTS coil.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.53-60
• /
• 2010

This paper dealt with the acoustic detection of partial discharge (PD) in insulation oil for insulation diagnostics of oil immersed transformers. Electrode systems such as needle to plane, plane to plane, and floating were fabricated to simulate some defects in transformers. A wide band acoustic emission(AE) sensor with the frequency ranges of 100 kHz~1 MHz and a narrow band AE sensor with the resonant frequency of 140 kHz were used in the experiment. Also, a decoupler and an amplifier were designed to detect and amplify the acoustic signal only. The decoupler separates acoustic signal from DC source without any distortion, and the amplifier has the gain of 40 dB in frequency ranges of 11 kHz~4 MHz. In the experiment, frequency components and propagation characteristics of acoustic signal were analyzed, and an algorithm of positioning of PD occurrence by the time difference of arrival was proposed. From the results, the frequency components of the acoustic signal exist from 50 kHz to 200 kHz and the positioning error of PD calculated by three AE sensors was within 1%.