• 융합신호처리학회논문지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2018

본 논문에서는 다중 스케일 영상 공간에서 특징점 검출을 위해 수행되는 반복적인 과정을 제거하는 방법을 제안한다. 제안한 방법은 원 영상으로부터 특징점을 검출하고, 클러스터 필터를 이용하여 유효한 특징점을 선별하고, 특징점 클러스터를 생성한다. 그리고 특징점 클러스터의 방향 각도를 이용하여 참조 객체를 선별하고, 분산 거리 비율을 이용하여 원 영상의 스케일을 예측한다. 예측한 스케일에 따라 참조 영상의 스케일을 변환하고, 변환된 참조 영상에 대해 특징점 검출을 적용한다. 실험 결과 제안한 방법은 다중 스케일 영상을 사용하는 SIFT 방법 및 Scaled ORB 방법에 비해 특징점 검출 시간이 각각 75% 및 71% 향상됨을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제45권5호
• /
• pp.595-611
• /
• 2013

This paper aims to compare three collocation point methods associated with the odd order stochastic response surface method (SRSM) in a systematical and quantitative way. The SRSM with the Hermite polynomial chaos is briefly introduced first. Then, three collocation point methods, namely the point method, the root method and the without origin method underlying the odd order SRSMs are highlighted. Three examples are presented to demonstrate the accuracy and efficiency of the three methods. The results indicate that the condition that the Hermite polynomial information matrix evaluated at the collocation points has a full rank should be satisfied to yield reliability results with a sufficient accuracy. The point method and the without origin method are much more efficient than the root method, especially for the reliability problems involving a large number of random variables or requiring complex finite element analysis. The without origin method can also produce sufficiently accurate reliability results in comparison with the point and root methods. Therefore, the origin often used as a collocation point is not absolutely necessary. The odd order SRSMs with the point method and the without origin method are recommended for the reliability analysis due to their computational accuracy and efficiency. The order of SRSM has a significant influence on the results associated with the three collocation point methods. For normal random variables, the SRSM with an order equaling or exceeding the order of a performance function can produce reliability results with a sufficient accuracy. The order of SRSM should significantly exceed the order of the performance function involving strongly non-normal random variables.

• 한국컴퓨터그래픽스학회논문지
• /
• 제29권1호
• /
• pp.1-11
• /
• 2023

딥러닝 기반의 이미지 세그멘테이션은 차선 인식을 위해 널리 사용되는 접근 방식 중 하나로, 차선의 키포인트를 추출하기 위한 후처리 과정이 필요하다. 일반적으로 키포인트는 사용자가 지정한 임계값을 기준으로 추출한다. 하지만 최적의 임계값을 찾는 과정은 큰 노력을 요구하며, 데이터 세트(또는 이미지)마다 최적의 값이 다를 수 있다. 본 연구는 사용자의 직접 임계값 지정 대신, 대상의 이미지에 맞추어 적절한 임계값을 자동으로 설정하는 키포인트 추출 알고리즘을 제안한다. 본 논문의 키포인트 추출 알고리즘은 차선 영역과 배경의 명확한 구분을 위해 줄 단위 정규화를 사용한다. 그리고 커널 밀도 추정을 사용하여, 각 줄에서 각 차선의 키포인트를 추출한다. 제안하는 알고리즘은 TuSimple과 CULane 데이터 세트에 적용되었으며, 고정된 임계값 사용 대비 정확도 및 거리오차 측면에서 1.80%p와 17.27% 향상된 결과를 얻는 것을 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권2호
• /
• pp.65-71
• /
• 2024

In this study, we suggested a key-point detection method for robot harvesting of oriental melon. Our suggested method could be used to detect the detachment part and major composition of oriental melon. We defined four points (harvesting point, calyx, center, bottom) based on tomato with characteristics similar to those of oriental melon. The evaluation of estimated key-points was conducted by pixel error and PDK (percentage of detected key-point) index. Results showed that the average pixel error was 18.26 ± 16.62 for the x coordinate and 17.74 ± 18.07 for the y coordinate. Considering the resolution of raw images, these pixel errors were not expected to have a serious impact. The PDK score was found to be 89.5% PDK@0.5 on average. It was possible to estimate oriental melon specific key-point. As a result of this research, we believe that the proposed method can contribute to the application of harvesting robot system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권3호
• /
• pp.1047-1062
• /
• 2022

Differential power analysis (DPA) is disturbed by ghost peaks. There is a phenomenon that the mean absolute difference (MAD) value of the wrong key is higher than the correct key. We propose a compressed key guessing space (CKGS) scheme to solve this problem and analyze the AES algorithm. The DPA based on this scheme is named CKGS-DPA. Unlike traditional DPA, the CKGS-DPA uses two power leakage points for a combined attack. The first power leakage point is used to determine the key candidate interval, and the second is used for the final attack. First, we study the law of MAD values distribution when the attack point is AddRoundKey and explain why this point is not suitable for DPA. According to this law, we modify the selection function to change the distribution of MAD values. Then a key-related value screening algorithm is proposed to obtain key information. Finally, we construct two key candidate intervals of size 16 and reduce the key guessing space of the SubBytes attack from 256 to 32. Simulation experimental results show that CKGS-DPA reduces the power traces demand by 25% compared with DPA. Experiments performed on the ASCAD dataset show that CKGS-DPA reduces the power traces demand by at least 41% compared with DPA.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2478-2484
• /
• 2010

본 논문은 실시간 파노라마를 위한 영상의 특징점 검출 방법을 제안한다. 파노라마 연구는 최근 실시간 지역탐색이나 DVR 등에 적용하는 연구가 최근 활발히 진행되고 있다. 특히 특징점 검출은 파노라마를 이루는 가장 중요한 요소이다. 특징점 검출을 위해서는 어떠한 명암 변화에도 특징점은 불변이어야 하며 이미지의 크기와 회전이 변화하더라도 불변의 점을 찾아야 한다. 기존 연구방법은 고차원적인 벡터와 많은 후보점을 선점하기 때문에 연산량이 많고 수행시간이 길어 실시간에 활용하기에는 어려운 점이 있다. 따라서 본 논문은 보다 빠른 실시간 특징점 검출을 위해 LOG 방법을 비트 단위로 분할 후 결합하는 BLOG 방법을 제안하고 다양한 실험을 통하여 속도와 연산량 그리고 검출 성능에 대하여 비교한다.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1308-1316
• /
• 2017

The distributed maximum power point tracking (DMPPT) concept is widely adopted in photovoltaic systems to avoid mismatch loss. However, the high cost and complexity of DMPPT hinder its further promotion in practice. Based on the concept of DMPPT, this paper presents an integrated submodule level half-bridge stack structure along with an optimal current point tracking (OCPT) control algorithm. In this full power processing integrated solution, the number of power switches and passive components is greatly reduced. On the other hand, only one current sensor and its related AD unit are needed to perform the ideal maximum power generation for all of the PV submodules in any irradiance case. The proposal can totally eliminate different small-scaled mismatch effects in real-word condition and the true maximum power point of each PV submodule can be achieved. As a result, the ideal maximum power output of the whole PV system can be achieved. Compared with current solutions, the proposal further develops the integration level of submodule DMPPT solutions with a lower cost and a smaller size. Moreover, the individual MPPT tracking for all of the submodules are guaranteed.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1248-1258
• /
• 2019

This paper presents a moth-flame optimization (MFO)-based maximum power point tracking (MPPT) method for photovoltaic (PV) systems. The MFO algorithm is a new optimization method that exhibits satisfactory performance in terms of exploration, exploitation, local optima avoidance, and convergence. Therefore, the MFO algorithm is quite suitable for solving multiple peaks of PV systems under partial shading conditions (PSCs). The proposed MFO-MPPT is compared with four MPPT algorithms, namely the perturb and observe (P&O)-MPPT, incremental conductance (INC)-MPPT, particle swarm optimization (PSO)-MPPT and whale optimization algorithm (WOA)-MPPT. Simulation and experiment results demonstrate that the proposed algorithm can extract the global maximum power point (MPP) with greater tracking speed and accuracy under various conditions.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.103-112
• /
• 2007

This paper presents a practical approach for surface reconstruction from unoriented point clouds. Instead of estimating local surface orientation, we first generate a set of depth images from the input point clouds, and a coarse mesh is then generated based on them by space carving techniques. The resultant mesh is progressively refined by local mesh refinement and optimization according to surface distance measure. A manifold mesh approximating the input points within an given tolerance is finally obtained. Our approach is easy to implement, but has the ability to outputs high quality meshes in different resolutions. We show that the proposed approach is not sensitive to several types of data disfigurement and is able to reconstruct models robustly from variance input data.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.202-203
• /
• 2022

In this study, focusing on work types of lifting modules and modules assembly in modular construction sites, unit works were defined according to the construction process of each work type, and safety management elements, safety management activities, and key check point were proposed. The results of this study may have somewhat overlapping contents in the construction procedure in order to derive specific safety management activities and check point for each unit work. Therefore, there is a limit to use the results in an actual modular construction site. In future research, we plan to improve this part and derive a checklist that considers field usability.