• 제목/요약/키워드: Key Performance Parameter

검색결과 222건 처리시간 0.028초

A Digital Self-Sustained Phase Shift Modulation Control Strategy for Full-Bridge LLC Resonant Converters

  • Zheng, Kai;Zhou, Dongfang;Li, Jianbing;Li, Li;Zhao, Yujing
    • Journal of Power Electronics
    • /
    • 제16권3호
    • /
    • pp.915-924
    • /
    • 2016
  • A digital self-sustained phase shift modulation (DSSPSM) strategy that allows for good soft switching and dynamic response performance in the presence of step variations is presented in this paper. The working principle, soft switching characteristics, and voltage gain formulae of a LLC converter with DSSPSM have been provided separately. Furthermore, the method for realizing DSSPSM is proposed. Specifically, some key components of the proposed DSSPSM are carefully investigated, including a parameter variation analysis, the start-up process, and the zero-crossing capture of the resonant current. The simulation and experiment results verify the feasibility of the proposed control method. It is observed that the zero voltage switching of the switches and the zero current switching of the rectifier diodes can be easily realized in presence of step load variations.

Reliability analysis of steel cable-stayed bridges including soil-pile interaction

  • Cheng, Jin;Liu, Xiao-luan
    • Steel and Composite Structures
    • /
    • 제13권2호
    • /
    • pp.109-122
    • /
    • 2012
  • An efficient and accurate algorithm is proposed to evaluate the reliability of cable-stayed bridges accounting for soil-pile interaction. The proposed algorithm integrates the finite-element method and the response surface method. The finite-element method is used to model the cable-stayed bridge including soil-pile interaction. The reliability index is evaluated based on the response surface method. Uncertainties in the superstructure, the substructure and load parameters are incorporated in the proposed algorithm. A long span steel cable-stayed bridge with a main span length of 1088 m built in China is considered as an illustrative example. The reliability of the bridge is evaluated for the strength and serviceability performance functions. Results of the study show that when strength limit states for both girder and tower are considered, soil-pile interaction has significant effects on the reliability of steel cable-stayed bridges. Further, a detailed sensitivity study shows that the modulus of subgrade reaction is the most important soil-pile interaction-related parameter influencing the reliability of steel cable-stayed bridges.

복합시스템 가용도 분석을 위한 시뮬레이션 모델 연구 (A Study on a Simulation Model to Analyze the Availability of a SoS)

  • 김혜령;김의환;최상영
    • 한국군사과학기술학회지
    • /
    • 제14권6호
    • /
    • pp.1049-1057
    • /
    • 2011
  • Today, most weapon systems operate as component systems of SoS(System of Systems) and they produce synergy effects in the battle field by interoperating. In addition, the acquisition issues on weapon systems have expanded into SoS context including sustainment analysis. Availability is the sustainment KPP(Key Performance Parameter) of weapon systems. In this paper, a simulation model is proposed to analyze the availability of SoS. The simulation model consists of 5 modules: Mission and Task, System, System RBD, Maintenance system and a simulation engine. Then it was implemented and applied to a SoS. As a result of the application, the simulation model could be applied for analyzing the availability of the SoS and provided information about critical tasks and risky component systems to complete the given mission of the SoS.

철근 콘크리트 특수 모멘트 골조 건물의 비탄성 동적 성능값 (Nonlinear Dynamic Capacity of Reinforced Concrete Special Moment Frame Buildings)

  • 김태완;김태진
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2006년도 학술발표회 논문집
    • /
    • pp.209-216
    • /
    • 2006
  • For evaluation of building performance, a nonlinear dynamic capacity of the building is a key parameter. In this study, an reinforced concrete special moment resisting frame building was chosen to study the process of determining the nonlinear dynamic capacity. The building, which was designed by IBC 2003 representing new codes, was composed of special moment resisting frames in the perimeter and internal frames inside the building. The capacity, which is inter-story drift capacity, consists of two categories, local and global collapses. Global collapse capacity was determined by incremental dynamic analysis. Local collapse capacity was determined by the same method except for utilizing damage index. In audition to this, it was also investigated that the effect of including internal frames designed by gravity load in the analysis. Results showed that the damage index is a useful tool for determining local collapse. Furthermore, including the internal frames with special frames in the analysis is very important in determining the capacity of a building so both must be considered at the same time.

  • PDF

군장비 신뢰성활동의 최근 동향 (Recent Trend of Reliability Activities for Military Systems)

  • 김철
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제7권3호
    • /
    • pp.111-118
    • /
    • 2007
  • In 2000, US Army Test and Evaluation Command (ATEC) released the status of reliability requirement levels and achievements for the military equipment which evaluated through the operational tests from 1985 to 1990 and from 1996 to 2000. The rates of military equipments that do not meet reliability requirements are 59% from 1985 to 1990 and 80% from 1996 to 2000. Thus, the US Army has figured out causes, taken steps and put them into practice, This paper is about the recent reliability problems and the latest tendency about US military equipment to acquirere liability level.

  • PDF

AI 기반의 주조 공정 파라미터 최적화를 통한 알고리즘 개선 (Algorithm Improvement Through AI-Based Casting Process Parameter Optimization)

  • 심현;최서영;김현욱
    • 한국전자통신학회논문지
    • /
    • 제18권3호
    • /
    • pp.441-448
    • /
    • 2023
  • 제조 공정 데이터에 있어 주조 공정은 가장 중요한 공정이면서 높은 불량률의 원인을 발생시키는 공정이다. 주조 공정의 품질관리는 생산성과 품질평가의 핵심 요소라 할 수 있다. 본 연구에서는 공정 데이터를 통한 요인 분석, 상관 분석, 회귀 분석 결과를 기반으로 최적화 된 머신러닝 모델 알고리즘을 개발한다. 이를 적용한 주조공정을 통해서 불량률을 줄이고 스마트 팩토리의 데이터 적합성을 검증하고자 한다.

Flutter analysis of Stonecutters Bridge

  • Hui, Michael C.H.;Ding, Q.S.;Xu, Y.L.
    • Wind and Structures
    • /
    • 제9권2호
    • /
    • pp.125-146
    • /
    • 2006
  • Stonecutters Bridge of Hong Kong is a cable-stayed bridge with two single-column pylons each 298 m high and an aerodynamic twin deck. The total length of the bridge is 1596 m with a main span of 1018 m. The top 118 m of the tower will comprise structural steel and concrete composite while the bottom part will be of reinforced concrete. The bridge deck at the central span will be of steel whilst the side spans will be of concrete. Stonecutters Bridge has adopted a twin-girder deck design with a wide clear separation of 14.3 m between the two longitudinal girders. Although a number of studies have been conducted to investigate the aerodynamic performance of twin-girder deck, the actual real life application of this type of deck is extremely limited. This therefore triggered the need for conducting the present studies, the main objective of which is to investigate the performance of Stonecutters Bridge against flutter at its in-service stage as well as during construction. Based on the flutter derivatives obtained from the 1:80 scale rigid section model experiment, flutter analysis was carried out using 3-D finite element based single parameter searching method developed by the second author of this paper. A total of 6 finite element models of the bridge covering the in-service stage as well as 5 construction stages were established. The dynamic characteristics of the bridge associated with these stages were computed and applied in the analyses. Apart from the critical wind speeds for the onset of flutter, the dominant modes of vibration participating in the flutter vibration were also identified. The results indicate that the bridge will be stable against flutter at its in-service stage as well as during construction at wind speeds much higher than the verification wind speed of 95 m/s (1-minute mean).

전술 무선 네트워크에서 무인체계를 위한 해시 충돌 기반의 양방향 인증 프로토콜 (A Two-Way Authentication Protocol Based on Hash Collision for Unmanned Systems in Tactical Wireless Networks)

  • 이종관
    • 정보보호학회논문지
    • /
    • 제29권4호
    • /
    • pp.729-738
    • /
    • 2019
  • 본 논문에서는 채널 상태가 좋지 않아 장거리 통신이 보장될 수 없는 전술 무선 네트워크에서 무인체계 간의 양방향 인증 프로토콜을 제안한다. 모든 무인체계는 작전에 투입되기 전에 인증에 필요한 정보들을 안전하게 할당 받는다. 제안하는 프로토콜은 해시 충돌을 유발하는 임의의 데이터들을 사용하여 인증 코드를 생성한다. 인증 요청자는 생성한 인증코드, 무인체계의 ID와 시간정보 등으로 인증요청메시지를 구성한다. 그리고 인증요청메시지는 사전에 분배된 비밀키로 암호화하여 전송된다. 수신자는 인증요청메시지를 복호화하여 인증코드를 검증함으로써 인증요청자를 인증한다. 제안하는 프로토콜의 성능을 다양한 공격 시나리오를 대상으로 분석한 결과, 제안하는 프로토콜이 메시지 재전송, 위장, 메시지 변형 등 다양한 공격에 안전할 뿐 아니라, 장거리 통신이 요구되는 별도의 인증서버가 불필요하고 통신 오버헤드, 인증 소요시간 측면에서 효율적임을 확인하였다. 또한 제안한 프로토콜의 파라미터 값이 성능에 미치는 영향을 분석하여 보안 요구 수준에 따른 적절한 파라미터 값 선정 가이드를 제시하였다.

다구찌 방법을 이용한 Instrument Cluster 상의 IVIS 메뉴 설계에 대한 연구 (A Study on Designing of a Menu Structure for the Instrument Cluster IVIS using Taguchi Method)

  • 홍승표;김성민;박성준;정의승
    • 대한인간공학회지
    • /
    • 제29권1호
    • /
    • pp.39-46
    • /
    • 2010
  • The growth of function in vehicle needs complex display and control system, the In-Vehicle Information System(IVIS). Although current IVISs are widely implemented in commercial vehicles, a new form of IVIS has been recently studied in order to reduce drivers' workloads. The purpose of this study is to suggest an appropriate menu structure of a new type IVIS, to be implemented on the instrument cluster panel, using Taguchi's parameter design. In the research, firstly, functions were selected that are appropriate to control through the instrument cluster among existing functions of current IVISs by quantitative evaluation of ergonomic principles. Then, menu structure alternatives were extracted by investigating priorities to those functions selected. Finally, menu structure alternatives were evaluated through an experiment and suggest the most appropriate one by applying Taguchi's parameter design. Taguchi method was used not only for planning an experiment but also evaluating alternatives. SN ratios were a key value to evaluate the alternatives and to find the most proper one. Through the research, the most appropriate menu structure for the instrument cluster IVIS was finally suggested among the alternatives and it is expected that the results of this research could provide a guideline to the instrument cluster IVIS.

Effect of Partial Substitution of Dietary Spray-dried Porcine Plasma or Fishmeal with Soybean and Shrimp Protein Hydrolysate on Growth Performance, Nutrient Digestibility and Serum Biochemical Parameters of Weanling Piglets

  • Sun, Zhantian;Ma, Qiugang;Li, Zhongrong;Ji, Cheng
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권7호
    • /
    • pp.1032-1037
    • /
    • 2009
  • The present experiment was conducted to study the effects of partial replacement of spray-dried porcine protein (SDPP) or fish meal with soybean and shrimp protein hydrolysate (SSPH) on growth performance, nutrient digestibility and serum biochemical parameters in weaned pigs. Two hundred and forty 21${\pm}$2 d old pigs ((Pietrain${\times}$Duroc)${\times}$(Landrace${\times}$Large Yorkshire)) with initial weight of 6.9${\pm}$0.5 kg were randomly allocated to five dietary treatments with six replicates per treatment and eight piglets per replicate. The control diet (T1) contained 2% SDPP and 6% fishmeal, and SDPP for experimental diets T2 and T3 was replaced with 1% and 2% SSPH, respectively, on an iso-nitrogenous basis. The fishmeal for experimental diets T4 and T5 was replaced with 1% and 2% SSPH, respectively, also on an iso-nitrogenous basis. The experimental period was 21 days. The results showed that weaned piglets fed the diets containing 1% and 2% SSPH as a replacement for SDPP had similar average daily gain (ADG), average daily feed intake (ADFI), feed/gain (F/G), diarrhea rate and serum biochemical indices e.g. blood urea nitrogen (BUN), total serum protein (TP), albumin to globulin ratio (A/G), globulin (GLO), serum glucose (GLU), and immunoglobulin G (IgG) to those fed the control diet during 0-10 d and 0-21 d of the experiment. The substitution of 1% SSPH on an iso-nitrogenous basis for fish meal appeared to be beneficial for ADG (p = 0.59) and ADFI (p = 0.23) of piglets during the overall period. The digestibility of calcium was higher (p<0.01) in pigs fed diets containing SSPH than on the control diet. Addition of 1% SSPH on an iso-nitrogenous basis for fish meal could increase the digestibilities of dry matter and energy of the diet. Dietary replacement of fish meal with 1% and 2% SSPH had no effect on the concentrations of BUN, TP, A/G, GLO, GLU, and IgG. In conclusion, dietary SDPP or fish meal could partially replace SSPH without any adverse effect on growth performance, nutrient digestibility and serum biochemical parameters in weaned piglets.