• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.3
• /
• pp.105-112
• /
• 2007

In general, the earlier methods for the design of MAXFLAT FIR filters have existent problems due to the approximation algorithms used to approach MAXFLAT(maximally flat) response in the passband and the stopband.. The proposed approach advanced by using of MAXSHCUT(maximally sharp cutoff) condition in this paper clearly overcomes these problems. In this approach, we use a key parameter represented with filter-order and cutoff-frequency parameters for obtaining the lowpass filters with the MAXFLAT and MAXSHCUT characteristics in the frequency domain. Consequently, this design technique leads to new MAXFLAT and MAXSHCUT FIR digital filter, which can achieve sharp-cutoff responses with the stopband attenuation exceeding 100 dB almost everywhere.

• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1091-1111
• /
• 2015

Base isolation is an effective method for protecting structures against earthquake hazard. It elongates the period of vibration and introduces supplemental damping to the structural system. The stiffness, damping and displacement are coupled forcing the code seismic design procedure to be unnecessarily complicated. In addition, the force reduction factor -a key parameter in the design procedurehas not been well addressed by seismic design codes at the high levels of damping due to the pronounced difference between pseudo and actual accelerations. In this study, a comparison has been conducted to evaluate eight different methods, in the literature, for calculating the force reduction factor due to damping. Accordingly, a simplified seismic analysis procedure has been proposed based on the well documented N2 method. Comprehensive analysis has been performed for base-isolated structure models for direct application and verification of the proposed procedure. The results have been compared with those of the European code EC8, the nonlinear time history analysis and investigations in the literature, where good agreement has been reported. In addition, a discussion has been elaborated for the resulted response of the base-isolated structure models with respect to the dynamic characteristics of the base isolation system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.415-415
• /
• 2007

In this study. it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as LCD television application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps. the gap of lamp and reflection plate and the number of lamps. It has many variation in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26mm of the distance of two lamps. 4.5mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition. and acquired good result in backlight such as the value of the brightness is 6436 nit in center of emission area and less than 5% in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.102-111
• /
• 2021

Maintainability is a major design parameter that includes availability as well as reliability in a RAM (reliability, availability, maintainability) analysis, and is an index that must be considered when developing a system. There is a lack of awareness of the importance of predicting and analyzing maintainability; therefore, it is dependent on past-experience data. To improve the utilization rate, maintainability must be managed as a key indicator to meet the user's requirements for failure maintenance time and to reduce life-cycle costs. To improve the maintainability-prediction accuracy in the detailed design stage, we present a maintainability-prediction method that applies Method B of the Military Standardization Handbook (MIL-HDBK-472) Procedure V, as well as a Korean maintainability-prediction software package that reflects the system complexity.

• Earthquakes and Structures
• /
• v.20 no.2
• /
• pp.161-173
• /
• 2021

The structural behavior of a tensile fabric structure, known as hypar, is investigated. Seismic-induced stresses in the fabric and axial forces in masts and cables are obtained using accelerograms recorded at different regions of the world. Time-history analysis using each recording are performed for the hypar by using finite element simulation. It is found that while the seismic stresses in the fabric are not critical for design, the seismic tensile forces in cables and the seismic compressive forces in masts should not be disregarded by designers. This is important, because the seismic design is usually not considered so relevant, as compared for instance with wind design, for these types ofstructures. The most relevant findings of this study are: 1) dynamic axial forces can have an increase of up to twice the static loading when the TFS is subjected to seismic demands, 2) large peak ground accelerations seem to be the key parameter for significant seismic-induced axial forces, but not clear trend is found to relate such forces with earthquakes and site characteristics and, 3) the inclusion or exclusion of the form-finding in the analysis procedure importantly affects results ofseismic stresses in the fabric, but not in the frame.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1853-1856
• /
• 2003

This paper considers the problem of longitudinal control of a platoon of automotive vehicles on a straight lane of a highway and proposes control laws in the event of loss of communication between the lead vehicle and the other vehicles in the platoon. Since safety plays a key role in the development of an Automated Highway System, fault-tolerant control is vital. In this paper, we develop a control algorithm in vehicle platooning and prove that this control algorithm is stable for certain class of faults such as parameter uncertainties. The performance of the controller is demonstrated through a series of simulations incorporating various vehicles and AHS faults. Results of simulation shows that the vehicles have good performance in spite of simple automotive and AHS failure, such as actuator failure,that is to say, engine input failure, communication failure between lead vehicle and the another vehicles.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.951-954
• /
• 2010

There are lots of soft ground improvement methods which is consist of different materials. In the analysis and design, composite ground method is usually regarded. Composite ground method considers the area replacement ratio as a key parameter to combine the physical and mechanical characteristics of tow different material. In this study, using composite material consist of three different materials which have different diameters, series of specific gravity test were performed according to KS F 2308, to investigate the applicability of composite ground method. As a result, it is found that composite material which is consist of fine grained soil and granular soil has a high applicability of composite ground method. This result means that, in estimating of ground properties of composite material which is consist of similar fine grained material such as cement mixing etc., composite ground method has a less applicability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1151-1155
• /
• 2010

Frost depth is one of important factors to design roadway structure, and it can be estimated with numerical simulation on thermal distribution through subgrade soils. Thermal conductivity is a key parameter for accurate prediction on thermal distribution, but there are few studies on thermal conductivity of subgrade soils in Korea. Thermal conductivity can be affected by several factors such as dry density, moisture content, and saturation degree based on previous researches. Two empirical equations to estimate thermal conductivity are applied to access the accuracy of these equations with experimental data. Results indicate that the equation can be used to estimate thermal conductivity with proper quartz fraction.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.1
• /
• pp.97-108
• /
• 2001

Design and evaluation of AGV-based material handling systems are very complicated due to the randomness and the large number of variables involved Vehicle travel time is a key parameter for designing and evaluating AGV systems. Although loaded travel time is relatively easy to estimate, determination of empty vehicle travel time is difficult due to the inherent randomness of material handling systems. Most previous studies assume that the empty vehicle travel time is the same as the loaded travel time or assume very specific environments. This paper presents new vehicle travel time models for AGV-based material transport systems. The research effort is focused on the estimation of empty vehicle travel time under various vehicle dispatching policies. Simulation experiments are used to verify the proposed travel time models.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.12
• /
• pp.1090-1095
• /
• 2012

In this paper, we propose a model-based fault diagnosis method applied to vibration data. The fault detection is performed by comparing estimated parameters with normal parameters and deciding if the observed changes can be explained satisfactorily in terms of noise or undermodelling. The key feature of this method is that it accounts for the effects of noise and model mismatch. And we aslo design a classifier for the fault isolation by applying the multiclass SVM (Support Vector Machine) to the estimated parameters. The proposed fault detection and isolation methods are applied to an engine vibration data to show a good performance. The proposed fault detection method is compared with a signal-based fault detection method through a performance analysis.