• 전기의세계
• /
• v.24 no.6
• /
• pp.67-71
• /
• 1975

어떤 자성재료에 대해서는 자기특성 이외에 유리부착성, 탄성, 접점에서의 특성 등이 요구되며 이러한 요구들을 한가지 재료로서 만족시키는 것은 곤란하므로 재료의 복합화가 시도되고 있다. Wire memory는 동선상에 permalley를 전착시킨 것이고 이것을 Core에 digit선이 통한 것으로 볼 수 있다. 금후로는 자성재료부품에서도 전자부품에서와 마찬가지로 재료를 복합소형화하여 일괄생산하는 방향으로 나아갈 것이 예상된다. 한편으로는 기억의 고밀도화가 강하게 요구되고 있으며 이에 따라 자성박막의 자벽 그 자체를 기억체로 이용하려는 방향으로 나아가고 있다. 이 경우, 기억체를 자기유도에 의하여 읽어내는 것은 S/N비가 적어서 곤란하고 Faraday효과, Kerr효과 등을 이용한 자기광학적 방법이 유효하다. 요즘 많이 연구되고 있는 초전도현상에 있어서고 재료의 자성이 도전율에 절대적인 영향을 미치므로 이에 관해서는 자성재료연구분야에서도 많은 관심이 모아지고 있다. 따라서 초전도재료에 관하여서도 따로 소개하고자 한다.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.89-94
• /
• 2004

We have investigated magnetic properties of monolayer (ML)-thickness Co film deposited on InP(2${\times}$4) reconstruction surface using in situ Surface Magneto-Optical Kerr Effects (SMOKE) measurement system. InP(2${\times}$4) reconstruction surface, obtained by repeated sputtering and annealing, was confirmed by reflection hish energy electron diffraction (RHEED) and scanning tunneling microscope (STM) measurements. From both longitudinal and polar SMOKE measurements, we have observed three distinguishable regions showing different magnetic properties depending on the Co thickness. In the Co film thickness smaller than 7 $m\ell$, no SMOKE signal was detected. In the following thickness between 8 $m\ell$ and 15 $m\ell$, both longitudinal and polar Kerr hysteresis loops were observed, which implies a metastable phase coexisted of in-plane and perpendicular anisotropies. In the film thickness larger than 16 $m\ell$, only longitudinal MOKE signal without polar signal was detected, which implies existence of in-plane anisotropy in this thickness region.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.257-262
• /
• 1992

We have studied the variations of composition and magnetic properties with deposition rate in GdFe thin films by means of DC magnetron sputtering with the enhanced complex target method. Gd atomic percent was decreased with the increase of deposite rate. It appeared the transition phenomena at 1.0 ${\AA}/s the deposition rate. Also, the deposition rate increased with input power and the sputtering efficience was proportional to the number of Gd chip. An increase of the coercivity with input power can be interpreted by the large size of Fe crystal grains. We have introduced by the diffusion guard sputtering and it was effective for reproducibility of the sample. We have measured ${\theta}_k$ with Kerr angle gauge, and could observe that the ${\theta}_k$ was little varied with input power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2219-2226
• /
• 2013

Optical phase conjugation combining with dispersion management (DM) is promising technique to compensate for signal distortion due to group velocity dispersion (GVD) and nonlinear Kerr effects in optical communication systems. However the fixed residual dispersion per span (RDPS) usually used in the optical links with OPC and DM restricts the flexible link configuration. In this paper, OPC links combining DM of the randomly distributed RDPS is proposed for implementing the flexible optical transmission network. It is confirmed that the excellent compensation in the optical links with the randomly distributed RDPS is obtained, limiting the launch power of WDM channels to the relatively low. It is also confirmed that the relatively high launch power WDM channels are effectively transmitted through the optical links with the randomly distributed RDPS of averaged 50 - 100 ps/nm.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.93-97
• /
• 1988

The physico-chemical properties of clay minerals(Kaolinite, Montmorillonite) and the competitive adsorption of various cations in them were investigated as a basic research for the development of clean and hygienic water from hard and contaminated water. The cation adsorption forces of various cations in two clay minerals were high in the order of $Ca^{{+}{+}}$ > $Mg^{{+}{+}}$ > $K^+$ > $Na^+$, and the orders of cation selectivity coefficients(K) in Montmorillonite, calculated by Kerr's equation, were $^KCa^{{+}{+}}/K$ > $^KMg^{{+}{+}}/K$, $^KCa^{{+}{+}}/Mg$ > $^KK^+/Mg$. The amount of adsorbed cations was most high in Na-saturated Montmorillonite among several samples. So, in order to more effectively remove various divalent cations in hard and contaminated water, Na-saturated Montmorillonite is most desirable.

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.235-241
• /
• 1996

Co/Pd and Co/Pt multilayered thin films for perpendicular magnetic recording media were fabricated by sput¬tering method and the effects of the sputtering pressure during the formation of Pd or Pt underlayers on the magnetization behavior and coercivity of the multilayers were investigated. It was found that the coercivity of Co/Pd multilayers was strongly dependent on the sputtering pressure of underlayer and could be enhanced to a large extent merely by increasing the sputtering pressure of underlayer, while in case of Co/Pt films, the degree of coercivity enhancement by controlling the sputtering pressure of underlayer was almost negligible. Coercivity variation of Co/Pd and Co/Pt multilayers with the underlayer material and deposition pressure of underlayer could be well explained in terms of the interface roughness of multilayer films induced by underlayer topology, which could also be correlated to the change of perpendicular anisotropy energy and magnetic reversal feature with the sputtering pressure of underlayer. Kerr rotation angle was hardly affected by the preparation conditions of underlayers.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.39-42
• /
• 2015

After preparing carbon-doped FePt films by dc magnetron sputtering, we observed ultrafast demagnetization and its recovery by means of a time-resolved magneto-optical Kerr effect technique. We confirm that the degree of $L1_0$ ordering is decreased and coercivity is changed, as the carbon concentration increases. All samples are demagnetized within ~5 ps after the femtosecond laser pulse heated the sample. Interestingly, ultrafast relaxation time, which indicates fast magnetization recovery, increases as the carbon concentration increases due to the low spin-orbit coupling of carbon.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.462-466
• /
• 2018

Optical phase conjugation combining with dispersion management (DM) is promising technique to compensate for signal distortion due to chromatic dispersion and nonlinear Kerr effects of single mode fiber (SMF) in optical communication systems. However the fixed SMF length in every fiber spans usually used in the optical links with optical phase conjugator(OPC) and DM restricts the flexible link configuration. The goal of this paper is to investigate the possibility of the flexible configurations of the ultra-high and long-haul optical transmission systems by using the random distribution of SMF length of each fiber spans consisted of the optical link. It is confirmed that the excellent compensation for the distorted wavelength division multiplexing signals in the optical links with the randomly distribution is obtained in case of the shorter averaged SMF length over all fiber spans. It is also confirmed that the control method of net residual dispersion suitable to good compensation is postcompensation and the extent of net residual dispersion(NRD) is -10 ps/nm in DM optical link consisted of fiber spans with the randomly distributed SMF lengths.

• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.65-72
• /
• 1987

The purpose of this study was to examine the influence of several root canal sealers on the discoloration of internal surface after root canal obstruction. Twenty four sound human premolars, extracted for orthodontic or prosthodontic purposes, were randomly selected and divided into eight groups. Extracted premolars were prepared, and the following seven materials were introduced into the pulp cavities: AH 26, Fuji ionomer (Type I) cement, N2, Oxypara "Murakami", Kerr sealer, PCA sealer, and G-C's Propac ZOE cement. After 7 weeks of incubation; the discolored tooth crowns were hemisectioned, and the internal staining patterns were examined. Then, with an association of observed values the mean intensity scores and percentage of coverage scores of the internal staining patterns in teeth attained by two observers using for Chisquare test were analyzed. The results were as follows: 1. All the experimental premolar's crown showed various ranged discoloration of internal surface. 2. There was no significance between the association scores of two observers participated into this experiments:% coverage scores (P > 0.05) and intensity (P > 0.05) 3. The crowns filled with PCA sealer, AH 26, and Fuji ionomer cement was visible within a depth of one third of dentin. (P> 0.05) 4. For N2, Kerr sealer, and G-C's Propac cement, A slight dentinal staining was recorded, which penetrated up to half way into the dentin. (P> 0.05) 5. It was noticed that the teeth filled with Oxypara "Murakami" were discolored more than two thirds of the dentinal layer. 6. On the control group, there was no discoloration.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.249-255
• /
• 1994

Magneto-optical disks with dielectric layers for optical tunning are useful for maximizing the SNR. We have developed a computer program based on characteristic matrix to investigate the best combination of the film thicknesses. We have optimized the thicknesses of the multilayers which were composed of TbFeCo, dielectric, and AI layers at the wavelengh of 830nm. The criterion for the optimization of the film thickness was to maximize the figure of merit with maintaining the low ellipticity and rmre than 10% reflectivity.