• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1181-1187
• /
• 2009

Results for application of RDF(Refuse Derived Fuel) to selected wastes in metropolitan and small and medium cities are as follows. The physical characteristics of waste are paper, plastic, food waste, and so on. The proximate analysis in P city showed 20.2% of moisture, 71% of combustible material, and 8.8% of ash on annual average. That in G city showed 31.6% of moisture, 59.5% of combustible material, and 8.9% of ash. Ultimate analysis in P city showed 52.04% of carbon, 7.02% of hydrogen, 28.80% of oxygen, 0.66% of nitrogen, and 0.09% of sulfur. Heating value was 3,363 kcal/kg. Ultimate analysis in G city showed 50.85% of carbon, 6.56% of hydrogen, 29.86% of oxygen, 0.79% of nitrogen, and 0.12% of sulfur. Heating value in the G city was somewhat lower than that in the P city with 2,632 kcal/kg. Thus, application of RDF in metropolitan city was more effective than that in small and medium cities. Heating value in mixture for the P city was lower than that in waste of the volume rate waste charge system alone by 143 kcal/kg. In proximate analysis, moisture, and combustible material were likely to be more adequate to RDF.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.755-768
• /
• 1998

Nitrogen and phosphorus are major nutrients in animal feeds which partially remain in the environment as pollution. In addition, nitrogen and phosphorus along with energy are the main nutrients which determine the feed cost. Any decreases in the levels of these three nutrients can contribute to reducing the pollution problem as well as the cost of feed. The nutrient requirements for chickens in the work here reported should allow for the addition of mixed enzymes (phytases, proteases, glucanases, xylanases and others). Such minimal levels of crude protein in the research results which are here reported are 16% for 0-6 weeks of age, 13.5% for 7-12 weeks of age, 11.5% for 13-18 weeks of age for layer type chicks, 13% for layer, 18% for 0-3 weeks of age broiler and 16.5% for 4-7 weeks of age broiler. These research projects have been done without adding enzyme supplements to their experimental diets. The minimal values of phosphorus, shown as available phosphorus, are 0.25% for pullets, 0.09% for layers and 0.25% for broilers with the addition of phytase. The minimum energy requirement (metabolizable energy) for reducing the feed cost could be summarized as 2,750 kcal per kg feed for pullets, 2,800 kcal for layers and 2,700 kcal for broilers.

• Journal of Nutrition and Health
• /
• v.32 no.1
• /
• pp.40-49
• /
• 1999

This study was conducted with 20 female gymnasts and 23 age-matched controls to examine pattern, weight control behavior and nutritional status. Most gymnasts(95.0%) reported that they used weight-control methods, while relatively few age-matched controls employed these methods. These methods included sauna(95.0%), food restriction(90.0%), excess exercise (70.0%), laxative abuse(10%) and use of diet pills(10%). Gymnasts had significantly (p<0.05) lower scores for statements related to 'sneaking food', 'vomiting after overeating', showing more negative eating behavior than age-matched controls. Energy intake of gymnasts was 968.9$\pm$421.4kcal while energy expenditure was 2,091$\pm$361kcal, showing negative evergy balance(-1,1225$\pm$534.6kcal). Female gymnasts consumed less than 70% of the RDA for protein, calcium, iron, vitamin A, thiamin, riboflavin and niacin, which reflects their low energy intake. The average intakes of calcium, iron, vitamin A, thiamin, riboflavin and niacin did not meet the recommended dietary allowances for their age groups. Adolescent athletes who train vigorously and consume a low-energy diet may be exposed to an increase in potential health risks. Therefore, individuals who advise athletic adolescents regarding training and dietary habits need to emphasize the importance of consuming an appropriate energy intake to support performance as well as growth and development. The sports nutritionist is in a position to convey such information to coaches, physicians, parents and to the athletes themselves.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.417-420
• /
• 1993

Changes in color intensity of Hololeion maximowiczii(HM) roots which were treated with freeze drying (FD), $50^{\circ}C$ hot air drying (HAD) and $50^{\circ}C$ hot air drying after steam blanching (HADB) were investigated in this study. Color of HADB was yellow-green while other treatments showed bright brown color. In brown color intensity, optical density at 420 nm of FD treatment was highest but HADB treatment showed the highest value in ultra violet spectrum. Water soluble pigment of HM in state of aquous solution was more unstable for heat treatment than that in state of powder. Activation energy for decomposition of the pigment was 20.9 kcal/mole between $90{\sim}100^{\circ}C$ but 50.6 kcal/mole between $80{\sim}90^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.19 no.6
• /
• pp.515-519
• /
• 1987

The kinetics of thermal softening of chinese cabbage was investigated by puncture tests with an Instron. It was concluded that low temperature-long time blanching and pasteurization process provided an opportunity of improving the texture of pasteurized Kimchi. The rate of softening showed apparent first order kinetics, and the apparent Arrhenius activation energies ranged from 2.8-42.4 kcal/mol. The temperature dependency of the softening rate during pasteurization was more profound by blanching at blanching at higher temperature.

• Journal of the Korean Home Economics Association
• /
• v.36 no.8
• /
• pp.95-104
• /
• 1998

PET microfiber fabric dissociation reactions by ethylene glycol (EG) catalayzed by the corresponding EG anions were examined to provide an empirical basis for the improvement of a PET microfiber fabrics. The alkoxide ions, monosodium ethylene glycolate in ethylene glycol solution(MSEG-EG) are prepared by the reaction between NaH and the EG respectively. The dissociation reactions were carried out until the sample PET microfiber fabrics dissociate up to 80%. Temperature used ranged 100~$160^{\circ}C$. The kinetic behaviors of the dissociated PET microfiber fabrics were examined. The results are as follows : 1. In all cases, it was found that the PET-alkoxide dissociation rate constants increased exponentially with increasing temperature. The activation energies (Ea) of the reactions were 23.31kcal/mol in PET-EG system respectively. The calculated enthalpies of the activated [PET-EG] complexes from the corresponding Ea values were 22.53 ~ 22.61 kcal/mol, and the entropies were -19.03 ~ -19.24 kcal/mol/k respectively. 2. The kinetic behavior of the PET-alkoxide dissociation reactions examined was explained by the transition state theory. PET-alkoxide transition state is believed to be formed during the ester interchange mechanism between PET and MSEG-EG in the course of the PET dissociation reactions.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.9-16
• /
• 2010

This pilot study evaluated fueling feasibility of sewage sludge, which contains a large amount of water content, by applying melting of thermoplastic polyethylene (PE). This study has identified a simultaneous achievement of drying and heating value improvement of the sewage sludge. The sewage sludge collected from a sewage sludge treatment plant during a winter period had a water content of 83.7 wt%, a combustible volatile content of 12.5 wt%, and an ash content of 3.8 wt%. The higher heating value (HHV) of the dried sewage sludge, before impregnation or coating of PE, was 4,600 kcal/kg. The collected sewage sludge was immersed into the melted PE solution, which had a HHV of 11,070 kcal/kg, and kept immersing with increasing reaction time. As the reaction (immersing or coating or impregnation) time increased, the water content of the sludge decreased. However, the HHV of the sludge increased with increasing the reaction time. The HHVs of the sewage sludge immersed or dipped into the melted PE solution for 15 min ranged from 6,780 to 8,170 kcal/kg with water content less than 7 wt%. This result indicates the melted PE solution can be utilized as an improvement technology for dryness and heating value of the sewage sludge with high water content. The sewage sludge impregnated or coated with melted PE can be utilized as potential fuel or energy resources.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.847-851
• /
• 2004

The complexation characteristics of tetramethyl (1) and tetraethyl esters (2) of p-tert-butylcalix[4]arene with alkali metal cations have been investigated by ab initio calculation. The structures of endo- or exocomplexation of the hosts in cone conformation with alkali metal ions have been optimized using HF/6-31G method followed by B3LYP/6-31G(d) single point calculation. B3LYP/6-31G(d) calculations suggest that exo-complexation efficiencies of sodium ion to the cavity of lower rim of hosts 1 and 2 are 27.1 and 25.8 kcal/mol better than that of potassium ion, respectively. The exo-complexation efficiencies of potassium ion to the cavity of lower rim of hosts 1 and 2 are 33.3 and 31.5 kcal/mol better than the endo-complexation inside the upper rim (four aromatic rings) as expected from the experimental results. B3LYP/6-31G(d) calculation of the ethyl ester 2 shows 29.5 and 30.8 kcal/mol better exo-complexation efficiency for both sodium and potassium ions than the methyl ester 1.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.131-134
• /
• 2015

국내 천연가스 열량제도를 현행 표준 열량제 $10,400kcal/Nm^3(43.54MJ/Nm^3)$에서 중간 조정기간을 두고 2012.07.01부터는 최저 $10,100kcal/Nm^3(42.28MJ/Nm^3)$을 유지하고 2015년 이후 $9,800(41.1MJ/Nm^3){\sim}10,600kcal/Nm^3(44.4MJ/Nm^3)$ 열량범위제도로 변경 추진되고 있다. 산업현장에서 열량변동을 측정하여 공연비 제어기술을 개발하고자 60ton Al 용해로에 열량대응기술 개발을 위한 내용으로 열량측정시스템설치 및 열량 값과 연계하여 공연비 제어기술개발연구 내용으로 결과는 다음과 같다. 단순히 표준열량으로 에 맞춰 프로그램된 제어로직에 열량변동에서 검출된 신호를 이용하여 연료보정 값을 추가한 로직을 재구성할 필요가 있다. 이 혀장의 경우는 용탕의 온도가 목표온도 근처까지 올리기가 어려워진 상황으로 주로 공급열량 저열량화에 따른 과잉공기영향으로 온도상승이 어려워 보이며 적절한 공연비로 최적화 되면 이러한 문제가 개선되리라 생각된다.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.2
• /
• pp.10-19
• /
• 1990

The tempering behavoirs of 0.45% carbon steel treated by automatic progressive high frequency induction hardening equipment have been investigated. In order to examine the correlation of hardness with both tempering temperature and time, simple regression analysis has been made using the statistical quality control package. The maximum surface hardness value of induction hardened zone and its effective hardening depth have been determined to be Hv 810 and 0.76mm, respectively. The hardness obtained after tempering has been shown to vary lineary with tempering time at six different temperatures. The activation energies during tempering have been calculated to be 25.34kcal/mole, 32.73kcal/mole and 49.24kcal/mole for HRcs 60, 50 and 40, respectively, showing that tempering process occurs by a complex mechanism, The tempering hardness equation of $H=90.113{\sim}4.531{\times}10^{-3}$ [T(11.996+log t)] has proved to be in a reasonably good agreement with experimently determined data and it is also expected to be useful for the determination of tempering treatment conditions to obtain a required hardness value.