• 한국토양비료학회지
• /
• 제39권5호
• /
• pp.245-252
• /
• 2006

우리나라 토양의 분류체계를 보완하고 점토광물 조성과 분포를 파악하기 위하여 우리나라 390개 토양통 중 잔적 및 붕적토에서 유래된 26개 토양통을 대상으로 토양 층위별료 시료를 채취하여 집적층을(B층) 토양의 이화학적 특성, 토양 중 점토의 광물조성과 화학성분을 분석하였다. 잔적 및 붕적모재별로는 화강암과 화강편마암, 회장암에서 유래된 토양에서 kaolin과 quartz, 유문암, 3기층, 석영반암, 응회암에서 유래된 토양에서 quartz과 kaolin, 석회암, 혈암, 사암, 역암 등 퇴적암에서 유래된 토양에서 illite와 chlorite가 주요한 점토광물이었다. 토양통별 점토광물조성을 군집분석 (CA, cluster analysis)을 통하여 (1) illite, kaolin, vemiculite를 주광물로 하는 혼합점토광물군 (MIX), (2) kaolin을 주광물로 illite가 많은 kaolin군 (KA), (3) chlorite와 illite가 주광물인 chlorite군 (CH), (4) kaolin과 illite를 주광물로 smectite가 함유된 smectite군 (SM) 등 4개의 점토광물 조성군으로 구분하였다. 우리나라 토양의 대부분은 kaolin을 주광물로 하는 토양과 illite, kaolin, vemiculite가 함유된 토양이었으며, illite와 kaolin을 주광물로 하는 토양에서 CEC가 낮았고 vemiculite와 smectite가 함유된 점토에서 규반비가 높았다.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.41-47
• /
• 1981

The sintering characteristics of the SiC-Clay-Kaolin chamotte system were studied by addition of $Al_2O_3$ for the manufacture of silicate-bonded silicon carbide refractories at $1350^{\circ}C$. The sinterbilit of SiC-Binder mixture was measured by apparent porosity and compressive strength. And its mineral compositions were identified with X-ray diffractometer. The following results were obtained; 1) Optimum amount of mixed clay ($\textrm{Al}_2\textrm{O}_3$ 40 wt% mixed) as a binder was about 25wt% 2) Appropriate mixing ratio of mixed Kaolin chamotte ($\textrm{Al}_2\textrm{O}_3$ 40wt% mixed) was about 30wt% in the clay Kaolin chamotte binder. 3) Variation of apparent porosity and compressive strength of sintered SiC-binder mixture fired at $1350^{\circ}C$ were due to the sinterbility of clay.

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.22-30
• /
• 1974

This study was carried out to investigate the species of iron compounds in kaolin mineral and the bonding relation between the major kaolin and its subordinate iron compound existing as incidental mineral in common clay by means of chemical composition, X-ray diffraction, thermal differential and thermogravimetrie analysis for the application of clays in the field of ceramic raw material. The domestic clay are produced abounduntly in many places, but San-Cheong kaolin, Chu-An clay, and Yeong-Am clay were selected as samples in this experiment because of their frequent utilization in porcelain industry. Two kinds of samples with low and high iron content are picked up respectively from the place of production and elutriated under two micron size to determine the properties and concentration of iron compound very fine particles or colloidal substance of low crystalline grade. Therefore, hydrothermal treatment in autoclave was conducted considering the existence of low crystalline grade of iron compounds known as an amorphoue state in X-ray diffraction pattern furthermore, de-iron treatment of hydrothermal compound was done in order to identify the related iron compound before and after hydrothermal reaction and iron compound which is one of the samples was synthesized for the determination of their compounds state in more detail. The obtained results in this study are as follows: In San-Cheong kaolin, Chu-An clay and Yeong-Am clay 1) It is proved that species accompanying iron compound is $\alpha$-FeOOH form. 2) Iron compound is composed of very fine particles or colloidal substance. 3) The iron substance encircles the fine parts of clay minerals under 2 micron and acts as cementizing agent.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.188-196
• /
• 1980

To investigate the corrosion behavior of the clay-bonded kaolin chamotte by molten aluminum, the mixture of 20 wt% fire clay and 80 wt% kaolin chamotte was prepared and fired in the temperature range 900~120$0^{\circ}C$. The specimens fired at each temperature were reacted with molten aluminum at 90$0^{\circ}C$. The results obtained in this experiment are as followed. 1) It was confirmed through X-ray diffraction analysis that the clay-bonded kaolin chamotte exposed to molten aluminum suffered penetration by the reaction of aluminum with silica forming alumina and metallic silicon. 2) Penetration was independent whether the silica existed as free or one component of mullite. 3) Penetration of the specimen fired at 90$0^{\circ}C$ was negligible while the others fired above 100$0^{\circ}C$ showed remarkable penetration. 4) Penetration rate at 90$0^{\circ}C$ was parabolically increased with the holding time as in the case of metal oxidation.

• 한국토양비료학회지
• /
• 제43권6호
• /
• pp.837-843
• /
• 2010

토양광물 종류별 토양의 점토활성도를 구분하기 위하여 우리나라 390개 토양통을 점토광물과 함수산화광물을 기준으로 점토광물 조성이 다른 7개의 토양을 선정하여 토양광물 종류에 따른 점토의 CEC와 비표면적을 비교하였다. 토양 CEC에 대한 점토의 비가 0.7 이상인 토양은 사암을 모재로 Chlorite를 주광물로 하는 토양, 안산암질반암을 모재로 Smectite를 함유한 토양, 화산재를 모재로 Allophane과 Ferrihydrite가 주광물로 이루어진 토양이었으며, 점토활성도 0.3-0.7인 토양은 회장석을 모재로 Kaolin이 주광물 토양, 하성퇴적토를 모재로 Kaolin, Illite, Vermiculite가 혼합된 토양이었다. 또한 점토활성도 0.3이하인 토양은 화강암 및 화강편마암 모재의 Kaolin을 주광물로 Geothite와 Hematite가 함유된 적황색계 토양, 석회암 모재의 Illite와 Vermiculite를 주광물로 Gibbsite, Geothite, Hematite가 함유된 적황색계 토양이었다. 토양의 점토활성도는 점토의 CEC, 점토의 비표면적과 상관이 있어서 점토활성도가 높은 토양에서는 점토의 CEC가 높고 점토의 비표면적이 넓었다. 따라서 토양의 점토활성도는 기존의 점토광물의 정성과 정량분석을 실시하지 않고도 토양의 일반적인 분석을 통하여 토양 중 점토광물의 조성을 추정하고 토양의 물리-화학적 특성을 예측하는데 유용한 기준이 될 것으로 생각된다.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.35-44
• /
• 1976

The effect of quartz which exists in clays, especially in kaolin used for the production of chamotte sagger, on the strength of refractory was examined. In this study, a mixture of chamotte 50%, kaolin 25%, plastic clay 25% in ternary component system was selected as a batch composition. To this mixture 1%, 3% and 5% of feldspar and sericite were added respectively. The plastic clay used here was separated under 170 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. In order to change the particle size and the content of quartz, the kaolin was separated under 60, 115, 170 and 325 mesh by wet process, substituted quartz for coarse parts of it. Chamotte was classified into three grades, coarse (5-10mesh): medium (10-20mesh): fine(20-115mesh) and the ratio was 1:1:1. Samples were formed in 0.8xIx10cm size with 12.5% water at 160kg/$\textrm{cm}^2$ pressure, and fired at 130$0^{\circ}C$ for 1 hr. The fired samples were ivnestigated by means of x-ray diffraction analysis and microscopic observation, and the physical properties of them were also examined, such as firing shrinkage, apparent specific gravity and bulk specific gravity, apparent porosity, water absorption and modulus of rupture. The obtained results are as follows: 1. When screened kaolin with low content of quartz was added to fixed chamotte-plastic clay system, the sample lowered modulus of rupture and increased apparent porosity as the size of kaolin became finer. 2. When kaolin under 325 mesh with 7.2-15.81% quartz between 60-325 mesh was added to fixed chamotte-plastic clay system, the sample had higher apparent porosity and lower modulus of ruputure as the size and the amount of quartz became larger. 3. The addition of feldspar and sericite to chamotte-plastic clay system improved apparent porosity and modulus of rupture. The effect of feldspar was better when quartz content was low, although that of sericite was better than quartz content was high.

• Geomechanics and Engineering
• /
• 제3권2호
• /
• pp.131-151
• /
• 2011

The electrical conductivity of a soil-water system is related to its engineering properties. By measuring the soil electrical conductivity, one may obtain quantitative, semi-quantitative, or qualitative information to estimate the in-situ soil behavior for site characterization. This paper presents the results of electrical conductivity measured on compacted kaolin clay samples using a circular two-electrode cell in conjunction with a specially designed compaction apparatus, which has the advantage of reducing errors due to sample handling and increasing measurement accuracy. The experimental results are analyzed to observe the effects of various parameters on soil electrical conductivity, i.e. porosity, unit weight, water content and pore water salinity. The performance of existing analytical models for predicting the electrical conductivity of saturated and unsaturated soils is evaluated by calculating empirical constants in these models. It is found that the Rhoades model gives the best fit for the kaolin clay investigated. Two general relationships between the formation factor and soil porosity are established based on the experimental data reported in the literature and measured from this study for saturated soils, which may provide insight for understanding electrical conduction characteristics of soils over a wide range of porosity.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1135-1141
• /
• 2018

Volume changes of soils induced by inorganic acids cause severe foundation and superstructure failures in industrial buildings. This study aimed to assess the potential of fly ash to control volume changes in soils under acidic environment. Two soils such as black cotton soil predominant with montmorillonite and kaolin clay predominant with kaolinite were used for the present investigation. Both soils exhibited an increase in swelling subjected to phosphoric acid contamination. Ion exchange reactions and mineralogical transformations lead to an increase in swelling and a decrease in compressibility in black cotton soil, whereas phosphate adsorption and mineral dissolution lead to an increase in swelling and compressibility in case of kaolin clay. Different percentages of Class F fly ash obtained from Ramagundam national thermal power station were used for soil treatment. Fly ash treatment leads to significant reduction in swelling and compressibility, which is attributed to the formation of aluminum phosphate cements in the presence of phosphoric acid.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.252-260
• /
• 2022

국내에서 카올린 순도가 낮은 저품질의 고령토는 고순도의 고령토보다 월등히 많은 매장량과 우수한 경제성에도 불구하고 제품으로 활용되지 못하고 대부분 사장되고 있다. 본 연구의 목적은 국산 저품질 고령토를 석회석 소성점토 시멘트(LC³)의 원료로 활용할 수 있는 가능성과 최적의 소성온도를 도출하는 것으로, 고령토의 소성온도(600 ℃, 700 ℃, 800 ℃, 900 ℃)에 따른 LC³ 페이스트의 수화물 생성과 기계적 특성을 평가하기 위해 등온 열량 측정, X-선 회절 분석, 열 중량 분석 및 압축강도 시험을 실시하였다. 결과적으로 국산 저품질 고령토 점토는 클링커의 50 %를 대체하였음에도 불구하고 수화 3일차부터 메타카올린의 포졸란 반응에 의해 카르보알루미네이트 수화물과 C(A)SH를 생성하여 OPC와 거의 동등하거나 그 이상의 강도를 나타냈으며, 소성온도에 따라 강도발현에 큰 차이가 발생하는 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.57-62
• /
• 2018

본 연구는 국내에서 생산 된 호박씨, 동백씨, 고추씨 그리고 땅콩에서 오일을 압착 추출하여 오일의 정제과정에서 사용되는 흡착제인 활성탄, 산성백토, 백도토를 사용해서, 흡착제 사용에 따른 항산화 활성과 지방산 및 활성성분의 조성을 비교분석했다. 각 오일의 성분 분석 및 흡착제에 따른 변화는 가스마토그래피/질량분석기(GCMS)를 사용하여 분석했고 DPPH 라디컬 소거능과 ABTS 라디컬 소거능 측정을 통해 항산화 활성능력을 비교했다. 흡착제 처리 시, 실험에 사용된 4종의 국내산 식물성 오일에 포함 되어 있는 대부분의 지방산 및 항산화 능에 관여하는 화합물의 양이 감소되는 것을 관찰하였다. 호박씨 오일은 세 종류의 흡착제가 linoleic acid과 erythrodiol 성분을 감소시켰으며, 동백씨 오일의 경우 지방산들이 대체적으로 감소하였으나 산성백토로 정제한 군에서는 vitamin E의 손실이 없었고, 고추씨 오일의 매운 성분에 관여되는 capsaicin 화합물은 산성백토로 정제 시 53.33% 감소되었고, 땅콩 오일의 경우 활성탄을 처리한 군에서 sitosterol 화합물의 손실이 가장 적은 것을 확인 하였다. 항산화 활성은 호박씨 오일(백도토>산성백토>활성탄), 동백씨 오일(산성백토>백도토>활성탄), 고추씨 오일(백도토>산성백토>활성탄) 그리고 땅콩 오일(활성탄>산성백토>백도토)순으로 나타남을 확인하였다.