• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.827-833
• /
• 2016

와이어 직조 Kagome는 와이어로 직조된 Periodic Cellular Metal의 일종으로서 Kagome 구조로 이루어져 있다. 와이어 직조 Kagome는 무게 대비 높은 강도와 강성을 가지면서 대량 생산에도 큰 가능성을 가지는 것으로 알려졌다. 본 연구에서는 ${\alpha}$-cristobalite 구조적 특성을 모사하여 음의 푸아송비를 갖는 새로운 직조 구조체를 개발하였다. 와이어 직조 Kagome를 제작한 후 사면체 단위셀 부분을 강구와Epoxy를 이용하여 채우고, 초기 변형을 주어 시편을 제작하였다. 또한 FEA 시뮬레이션을 통해 제작 가능성을 확인하고, 실제 제작한 구조체를 대상으로 기계적 특성을 연구하였다.

• 한국가구학회지
• /
• 제21권3호
• /
• pp.248-252
• /
• 2010

This study is carried out to introduce the concept of Kagome structure as the new trial for the furniture design and the feasibility of its utilization in furniture industry. Kagome means originally the two dimensional bamboo-basket woven pattern that is composed of interlaced triangles whose lattice points each have four neighboring points, which was used in traditional bamboo craft design like 'Jukbuin(bamboo-wife)'. Its unique truss structure has been widely used by many kinds of the domain of science and engineering in mechanical and architectural industry with some merits, i,e, material utilization efficiency and robust strength. Here we tried to introduce two dimensional and three dimensional form of Kagome which are supposed to be a furniture design elements. Authors think these Kagome design could be realized with domestic lumber of inferior properties. Both of them would be used as a decorative element or mechanical supporter in furniture design.

• Advances in concrete construction
• /
• 제12권5호
• /
• pp.391-398
• /
• 2021

This paper presents an experimental study exploring impact resistant properties of Kagome truss reinforced composite panels. Three types of panels with different materials and reinforcements, i.e., ultra-high-performance mortar, steel fiber, and Kagome truss, were designed and manufactured. High-velocity projectile impact tests were performed to investigate the impact response of panels with dimensions of 200 mm×200 mm×40 mm. The projectile used in the testing was a steel slug with a hemispherical front; the impact energy was 1 557 J. Test results showed that the Kagome truss reinforcement was effective at improving the impact resistance of panels in terms of failure patterns, damaged area, and mass loss. Synergy effects of a combination of Kagome truss and fiber reinforcements for the improvement of impact resistance capacity of ultra-high-performance mortar were also observed.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.792-799
• /
• 2007

A newly developed cellular metal based on kagome lattice is an ideal candidate for multifunctional materials achieving various optimal properties. Intensive efforts have been devoted to develop efficient techniques for mass production due to its wide potential applications. Since a variety of imperfections would be inevitably included in the realistic fabrication processes, it is highly important to examine the correlation between the imperfections and material strengths. Previous performance tests were mostly done by numerical simulations such as finite element method (FEM), but only for perfect structures without any imperfection. In this paper, we developed an efficient numerical framework using nonlinear random network analysis (RNA) to verify how the statistical imperfections (geometrical and material property) contribute to the performance of general truss structures. The numerical results for kagome truss structures are compared with experimental measurements on 3-layerd WBK (wire-woven bulk kagome). The mechanical strength of the kagome structures is shown relatively stable with the Gaussian types of imperfections.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.78-83
• /
• 2007

A newly developed cellular metal based on kagome lattice is an ideal candidate for multifunctional materials achieving various optimal properties. Intensive efforts have been devoted to develop efficient techniques for mass production due to its wide potential applications. Since a variety of imperfections would be inevitably included in the realistic fabrication processes, it is highly important to examine the correlation between the imperfections and material strengths. Previous performance tests were mostly done by numerical simulations such as finite element method (FEM), but only for perfect structures without any imperfection. In this paper, we developed an efficient numerical framework using nonlinear random network analysis (RNA) to verify how the statistical imperfections (geometrical and material property) contribute to the performance of general truss structures. The numerical results for kagome truss structures are compared with experimental measurements on 3-layerd WBK (wire-woven bulk kagome). The mechanical strength of the kagome structures is shown relatively stable with the Gaussian types of imperfections.

• 대한토목학회논문집
• /
• 제32권4A호
• /
• pp.237-244
• /
• 2012

콘크리트는 재료적으로 인장에 취약하고 변형에 취성이 크다는 태생적 단점을 갖고 있다. 콘크리트 조직에 인장에 강한 작은 섬유를 혼합한 섬유보강콘크리트는 이러한 취약점을 보완할 수 있는 좋은 방법으로 간주되었으며, 많은 종류의 섬유재료와 방법들이 제안되었다. 그러나 이 섬유보강콘크리트에도 아직까지 해결하지 못한 문제로서 균질한 배합이 힘들고 높은 체적비를 갖는 섬유 혼입의 어려움 등이 있다. 최근에 새로운 개념의 규칙적 다공질 금속(periodic cellular metal)이 개발되어 기계 분야에 많이 적용되고 있는 철선으로 직조된 카고메 트러스가 있다. 이 논문은 기존 강섬유보강콘크리트의 현실적 문제점을 해결하기 위한 방법의 일환으로 카고메 트러스의 적용 가능성을 검토하기 위한 기초 실험 연구 결과를 정리한 것이다. 3종류의 카고메 트러스로 보강된 실험체와 동일한 제원의 수직스터럽으로 보강된 보 실험 결과와 비교하였다. 그 결과, 카고메 트러스 보강 실험체에서는 강도와 연성이 보통 스터럽 보강 보 보다 더 우수한 결과를 나타냈으며, 복부 보강재로서 우수한 기능을 할 수 있는 것으로 판명되었다.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.70-76
• /
• 2008

Periodic cellular metals (PCMs) are actively being investigated because of their excellent specific strength and stiffness, and multi-functionality such as a heat disperse structure bearing external loading. The Kagome truss PCM has been proved that it has higher resistance to plastic buckling and lower anisotropy than other truss PCMs. In this paper, the out-of-plane compressive responses of the WBK specimens have been measured, theoretically predicted and numerically analyzed. Three specimens of two-layered WBK are fabricated and tested for measuring the responses. The peak stress of compressive behavior and effective elastic modulus are predicted based on the equilibrium equation and elastic energy conservation. Moreover, the structure of the specimen is modeled using the commercial mesh generation code, PATRAN and the finite element analysis for the model under the compression is carried out using the commercial FE code, ABAQUS. Finally, the obtained results are compared with each other to analyze the compressive characteristics of Wire-woven Bulk Kagome (WBK).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.138-143
• /
• 2008

Recently, a new periodic cellular metal(PCM) named as Wire wove Bulk Kagome(WBK) was introduced. Based on the shape of tetrahedra composing a WBK, WBKs are classified into two types, namely, concave and convex type. They are easily differentiated by changing the assembling sequence. The effect of geometrical parameters such as the wire diameter, strut length and number of layers on the compressive behavior of concave type WBK has already been investigated. In this work, the similar works were performed with the convex type WBKs. It was shown that the compressive strength of the convex type WBK was quite similar to that of the concave type. The compressive strengths of convex type specimens also depend on the slenderness ratio, but a little different from those of concave type specimens in the detailed behavior. And densification occurs earlier than the concave type WBK.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1078-1085
• /
• 2006

Many studies have been focused on how to manufacture ultra light metal structures and optimize them. In this study, we introduced a new idea to make sandwich panels with quasi-Kagome truss cores. First, metal sheets with a peculiar pattern of slits were expanded to be meshes, they are crimped into a triangular wave pattern, and then one third of struts were bent reversely to be quasi-Kagome trusses. Finally, two face sheets were bonded on the upper and the lower sides. The bending strength was estimated through elementary mechanics for the sandwich specimens with two kinds of face sheet the results of estimation were compared with the those of finite element analyses and experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.139.2-139.2
• /
• 2005