• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.507-517
• /
• 2010

The KOREAN AIR - R&D Center has developed a solar array for STSAT-2 Flight Model, SaTReC-KAIST, using a fully localized technology and has verified the performance through a launch vibration test, orbit environment test and electrical performance test. The solar array will be launched at NARO Space Center by KSLV-I which is the first Korean launch vehicle, in May 2010. In this paper, a current-voltage curve that shows the power characteristics of solar arrays was derived by applying elements that affects the power performance of STSAT-2's solar arrays to the solar cell equivalent models. The result was compared to LAPSS test results, and accuracy of the solar cell equivalent model and the power performance simulation has been analyzed.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.56-64
• /
• 2004

In this research, design results of computer hardware which control solid motor movable nozzle thrust vector control(TVC) actuator for Korea Space Launch Vehicle I(KSLV-I) are described. TVC computer hardware is the equipment which has jobs for receiving control commands from Navigation Guidance Unit(NGU) and then actuating TVC actuator. Also, it has ability to communicate with other on board or ground equipments. Computer hardware has a digital signal processor as the main processor which is capable of high speed calculating ability of control algorithm, so it can have more stability, reliability and flexibility than the previous analog controller of KSR-III. Target board was designed for on board program development and then first prototype hardware was developed. Top level system design criteria, hardware configurations and ground support equipment of TVC computer system are described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.90-95
• /
• 2011

A Kick Motor, KSLV-I second stage propulsion system, utilizes a flexible seal for pitch and yaw axis controls during combustion. A flexible seal consists of the alternate laminate of rubber and composite reinforcement between forward and aft rings. A Kick Motor nozzle is rotated by the shear deformation of rubber layers. Consequently, the development of rubber, which is appropriate to the usage condition of flexible seal, is very important. A tensile test, QLS test (shear modulus and failure shear stress), and aging test have been carried out to confirm the performance of rubber developed. Test results show that the shear modulus of rubber are 0.4310 ~ 0.4997MPa and the failure shear stress is more than 2.5MPa.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.205-212
• /
• 2006

Atmospheric drag is the most significant factor effecting the low Earth satellites under the altitude of 800 km Although the atmospheric density of the low Earth orbit is very low compared to that of the sea level, the accumulated effect of the atmospheric drag slowly lowers the satellite velocity at the perigee. Decrease in velocity at perigee directly causes decrease in altitude at apogee which changes the eccentricity of the orbit. The orbit finally reaches a circular orbit before reentering the Earth. This paper states the methods of calculating the atmospheric drag and the lifetime of the satellite. The lifetime of the kick motor and the satellites which will be used on KSLV-L are calculated by Satellite Tool Kit.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.97-97
• /
• 2004

현재 KSLV-I에서 탑재부의 Pitch, Yaw, Roll의 3축 제어 및 2단부의 Roll 제어를 위해 사용되는 보조 추진 시스템은 구성이 단순하며, 신뢰성이 높은 것으로 알려져 있는 단일 추진제인 하이드라진을 이용하는 추진 시스템을 고려하고 있다. 이러한 하이드라진 추진 시스템은 추력실 전방에 설치되어 있는 추력기 밸브의 ON/OFF를 이용하여 추력을 조절하게 되는데, 이 때 추력기 밸브의 빠른 작동으로 인해 수격현상에 의한 급격한 압력 상승이 발생하게 되어 구조물의 손상을 발생하게 된다. (중략)

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.71-71
• /
• 2004

KSLV-I 추진기관 기체공급계는 상부의 산화제 탱크로부터 나온 산화제 주배관이 하부의 연료탱크를 관통하여 엔진공급계로 이어지도록 구성되어 있다. 연료탱크에는 산화제 배관의 관통을 위한 tunnel이 구성되어 있으며 배관과 tunnel은 일정한 간격을 유지하게 된다. 배관과 연료탱크 사이의 열전달을 줄이기 위하여 산화제 배관에 단열재를 적용할 수 있으나, 이 경우 배관의 운송, 조립시에 handling이 힘들게 되고, 특히 발사체에 조립된 후에 발생하는 단열재의 파손 및 성능감소에 대한 유지보수가 불가능하다. (중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.601-602
• /
• 2009

대한항공은 2003년 소형위성발사체(KSLV-I) 사업 참여와 함께 2005년부터는 국내 액체로켓엔진 개발관련 한국항공우주연구원 주관의 각종 개발에 참여하고 있다. 본 논문에서는 현재 국내에서 진행중인 75톤급 액체로켓엔진 시스템 선행개발관련 대한항공이 수행하고 있는 분야별 업무의 소개와 함께 대한 항공의 향후 추진 계획을 다루고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.900-907
• /
• 2013

Payload fairing(PLF) protects satellites and related equipment from the external environment. They are separated before the satellite separation. Payload fairing made of composite sandwich materials due to their considerable bending stiffness and strength-to-weight ratio. Payload fairing have compression, shear and bending load during the flight. In this study, To check the strength of PLF and connected part, structural test of PLF accomplished using an actuator and a fixture. Purpose of structural test is to verify the strength of PLF in force of separation spring and combination structural load applied. Test result shows that the PLF have an acceptable margin of safety for the combination structural load and force of separation spring.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.929-937
• /
• 2008

A GPS receiver system utilized on satellite launch vehicles should operate normally under harsh environments as well as high-dynamic conditions. The GPS receiver system to use for range safety of KSLV(Korea Space Launch Vehicle)-I that is the first satellite launch vehicle developed by KARI(Korea Aerospace Research Institute) has been confirmed to survive under the environment of the launcher through extensive terrestrial tests including humidity, high and low temperatures, vacuum, sinusoidal and random vibrations, shocks, acceleration, EMI/EMC(Electromagnetic Interference/ Electromagnetic Compatibility), etc. Several performance tests have been also carried out in order to evaluate tracking capability and accuracy of the GPS receiver under high-dynamic conditions using a GPS signal simulator. Some lessons-learned during development of the GPS receiver system and its special characteristics compared with COTS(Commercial-Off-The-Shelf) GPS receiver systems are described in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1076-1083
• /
• 2017

This paper discusses the error estimation in radar measurement data obtained while tracking a launch vehicle. It is known that typical radar measurement data consist of the true positional or orientation information on the vehicle being tracked, random noise and a deterministic bias due to radio refraction. Unlike previous research works, this paper proposes a tracking-error (mainly bias) estimation method solely based on the single radar measurement with no aid of other measurement such as GPS. The proposed method has been verified with real measurement data obtained while tracking the KSLV-I launch vehicle.