• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• 분석과학
• /
• 제25권2호
• /
• pp.102-113
• /
• 2012

현행 환경오염공정시험기준 중 먹는 물 수질공정시험기준과 실내공기질 공정시험기준에 대해 국제규격에 부합화된 KS ISO규격과의 일원화에 관해 연구하였다. KS규격 23,000여종을 대상으로 먹는 물 및 실내공기질관련 KS 규격을 조사하였다. 환경분야관련 KS규격은 KS I로 분류되며, 총 653종으로 조사되었으며, 이중 국제규격에 부합화된 KS I 규격은 583종으로 조사되었다. 먹는 물 수질공정 시험기준은 총 100개 기준을 대상으로 ISO/TC 147 "Water Quality" 관련 KS 규격 총 232종을 비교 검토하였으며, 실내공기질 공정시험기준은 "ISO/TC 146 "Air Quality" 관련 KS 규격 총 95종 규격을 비교 검토하였다. 문헌검토와 비교시험을 통해 먹는 물 및 실내공기질 공정시험기준과 일원화 가능한 국제규격에 부합화된 KS규격 연구결과 먹는물수질공정시험 100개 기준 중 사전일원화 완료 23개 기준, 일원화 가능 29개 기준, 일원화 불가 12개 기준, 대응 규격 없는 기준이 36개로 평가되었으며, 실내공기질 공정시험기준 17개 기준 중 사전일원화 완료 1개 기준, 일원화 가능 3개 기준, 일원화 불가 3개 기준, 대응규격 없는 기준이 10개 기준으로 평가되었다.

• 한국의류산업학회지
• /
• 제10권1호
• /
• pp.92-100
• /
• 2008

When designing protective clothing, there are something to be considered such as physiological feature of human body, acting range not to restrict physical activity, and effectiveness of material. Because the primary objective of protective clothing is to protect human body from danger and it is designed through complex designing process not likely general clothing design. However, current evaluation techniques-such as the ISO, the ASTM and the CEN, and KS-provide only the standard to evaluate the primary feature of material (testing, performance requirements, material specification, selection and application, test and care, and so on). There are no standard to evaluate influence for the human body while protective clothing put on. Especially, in Korea, there is KS to evaluate protective clothing, but it is partially translated version from ISO because of lack of core technology about this field. However, developed countries recognize it is new competitive means in the time of Global Standards and they are competing to make their own standard to global standard for the protective clothing. Therefore, it can be great opportunity for Korean clothing and textile industry to revitalize if focusing on research and development for protective clothing design based on physical activity of human body, fit evaluation technique and sizing which is currently no global standard for it and developing our standard to global standard.

• 정보관리학회지
• /
• 제26권1호
• /
• pp.231-257
• /
• 2009

우리나라는 1999년 "공공기관의 기록물관리에 관한 법률"의 제정과 2006년 "공공기록물 관리에 관한 법률"의 전면 개정을 통해 종합적이고 체계적인 기록물관리 발전에 박차를 가하는 한편, 전자기록물로의 패러다임 전환을 위한 토대를 다져왔다. 이러한 맥락에서 국가 차원의 기록관리에 대한 구체적 지침으로서 법을 보완하는 기능과 역할을 하는 기록관리 표준 KS X ISO 15489의 2007년 제정은 큰 의의를 지닌다. 이에 본 연구는, 국가적 기록관리 정책과 원칙의 토대가 되는 법률과 표준은 상호배타적이거나 상충되어서는 안 된다는 원칙을 전제로, KS X 15489 제정의 의의를 살피고, 법률과 표준의 상호성을 논한다. 이를 위해, KS X ISO 15489의 다섯 가지 영역별 주요 내용을 토대로 법률에서의 상호 관련 내용을 비교 분석하고, 상호 정렬성을 검토한다. 이러한 분석을 토대로, 현행 기록물관리 관련 법령의 개선점을 논의하고, 기록관리의 미래지향적 발전에 대한 논점을 제시한다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.85-93
• /
• 2010

Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.

• 한국재난정보학회 논문집
• /
• 제17권1호
• /
• pp.184-193
• /
• 2021

연구목적: 본 연구에서는 CCFL유도등의 동작원리가 일반 조명기기와 동일하여 일반 조명기기의 램프 안정기 성능인증 기준인 KS기준에서 광원의 특성에 영향을 줄 수 있는 시험항목을 도출하여 CCFL유도등의 특성을 분석하였다. 또한 CCFL광원의 전기적 특성과 온도 특성의 연관성을 분석하여 광원 수명에 미치는 영향을 고찰하였다. 연구방법: 실험에 사용된 시료는 대형, 중형, 소형 등 각 크기별 2개 제조사의 제품을 대상으로 수행하였으며, 시험 항목은 역률, 파고율, 전류 고조파함유율이다. 연구결과: 역률은 모든 시료가 0.4~0.6사이의 값을 나타내어 KS기준에서 정한 0.9이상 보다 작은 값을 보였다. 파고율은 대형의 경우 3.6~3.7 정도의 값을 나타냈으며, 중형은 4.4~4.7, 소형은 3.5~3.7사이의 값을 나타내었다. KS기준인 1.7이하보다는 2배 이상의 높은 값을 나타냈다. 전류 고조파함유율은 81%~110%의 값을 나타냈으며, KS기준이 20% 이하임을 감안할 때 모든 시료가 KS기준을 상당히 넘어서는 값을 가짐을 확인할 수 있었다. 결론: 파고율과 전류 고조파함유율은 광원의 온도상승과 기기의 소손 등에 영향을 미칠 가능성이 있는 성분이므로 이런 전기적 특성을 KS기준의 범위 안에서 유도등을 개발한다면 유도등의 품질개선과 유지관리에 큰 도움이 되리라 생각된다.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.222-248
• /
• 1996

This study was designed to survey misused expression in 37 KS (Korean Industrial standards) related to personal protective equipment. The results were as follows: 1. One hundred and twenty five misused expressions were found - 44 expressions were used illogically (35.2 %). 80 expressions were wrongly described (64.0 %) The types of illogically misused are: 10 illogical cases, 4 cases of a wrongly designated provision when cited, 12 cases of the lack of provisons for KS, 7 cases of a inappropriate uses of units, 8 cases of an overlapped sizes between standards. - The types of expressions wrongly described are: 30 cases of confusion in using an terms, 4 case of making an error when proofreading, and 29 cases of choosing words not appropriate to describe technical standard, 18 cases of unclear provisons due to missing phrases and terms, and 11 cases of provisons described differently from original intended purposes. 2. There is one case, where the same standard is categorized as two different names. There are three major causes of the misused expressions as seen from the following summary: - Imitated the developed countries' standards without filtering them by considering domestic law and ocher KS standards. - Tended to create each definition for each standard instead use of the basic standard. - Insufficiency of synthetic examination to the correlation between standards.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.306-307
• /
• 2018

In Korea, The thermal resistance test of window sets is performed according to KS F 2278 standard, and is performed only on a specimen size of 2000 × 2000 (mm). In this study, a standard panel measuring 4000 × 3000 (mm) size was used to measure the heat flux in each part of the specimen, and to calculate the resistance to heat transfer And to seize whether the KS F 2278 standard is applicable to large Specimen.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.117-126
• /
• 2005

Korean Standard Certificate, suitable for the korean industrial standards is one which was designed not only to spread and utilize the industrial standard established for the industrial standardization, but to protect the consumer. In this study, the practical effects of the Korean Standard Certificate will be examined in various fields, based on the small medium enterprises which achieved the KS Certificate. In order to look into how the system has effects on the performance of the management in a company, the method of the actual approach will be used. In the end, the purpose of this study is to find the plan in which KS Certificate can be helpful to the development of the company.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.637-648
• /
• 2013

Purpose: The objective of this study is to provide a methodology that can facilitate efficient development of a product portfolio by utilizing Korean Standards(KS) networks. Methods: A case study on a steel manufacturing company is provided. Social network analysis h as been conducted on KS network and KS certification information of the company. Core test standards of a company have been identified. The core standards, then, used to construct a product-standard network of a corresponding industry. Results: As a result of analyzing product-standard networks, a product portfolio of a company has been developed. It has been shown that the candidate product portfolio is a cost-effective alternative in terms of standard maintenance cost. Conclusion: By using social network analysis, standards information can be used to support new product development process.