• Korean Journal of Remote Sensing
• /
• v.33 no.6_3
• /
• pp.1223-1232
• /
• 2017

This paper presents an approach to detect changes caused by urban development over a large area using KOMPSAT optical images. In order to minimize the radiometric dissimilarities between the images acquired at different times, we apply the grid-based rough radiometric correction as a preprocessing to detect changes in a large area. To improve the accuracy of the change detection results for urban development, we mask-out non-interest areas such as water and forest regions by the use of land-cover map provided by the Ministry of Environment. The Change Vector Analysis(CVA) technique is applied to detect changes caused by urban development. To confirm the effectiveness of the proposed approach, a total of three study sites from Sejong City is constructed by combining KOMPSAT-2 images acquired on May 2007 and May 2016 and a KOMPSAT-3 image acquired on March 2014. As a result of the change detection accuracy evaluation for the study site generated from the KOMPSAT-2 image acquired on May 2007 and the KOMPSAT-3 image acquired on March 2014, the overall accuracy of change detection was about 91.00%. It is demonstrated that the proposed method is able to effectively detect urban development changes in a large area.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1089-1100
• /
• 2018

In this paper, we analyze the feasibility of establishing a precise sensor model for high-resolution satellite imagery using unified control points. For this purpose, we integrated unified control points and the aerial orthoimages from the national land information map (http://map.ngii.go.kr/ms/map/NlipMap.do) operated by the National Geographic Information Institute (NGII). Then, we collected the image coordinates corresponding to the unified control point's location in the satellite image. The unified control points were used as observation data for establishing a precise sensor model. For the experiment, we compared the results of precise sensor modeling using GNSS survey data and those using unified control points. Our experimental results showed that it is possible to establish a precise sensor model with around 2 m accuracy when using unified control points.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.327-338
• /
• 2018

The possibility of ship detection monitoring at operational level using KOMPSAT-5 Synthetic Aperture Radar (SAR) and Automatic Identification System (AIS) data is investigated. For the analysis, the KOMPSAT-5 SLC images, which are collected from the west coast of Shinjin port and the northern coast of Jeju port are used along with portable AIS data from near the coast. The ship detection algorithm based on HVAS (Human Visual Attention System) was applied, which has significant advantages in terms of detection speed and accuracy compared to the commonly used CFAR (Constant False Alarm Rate). As a result of the integrated analysis, the ship detection from KOMPSAT-5 and AIS were generally consistent except for small vessels. Some ships detected in KOMPSAT-5 but not in AIS are due to the data absence from AIS, while it is clearly visible in KOMPSAT-5. Meanwhile, SAR imagery also has some false alarms due to ship wakes, ghost effect, and DEM error (or satellite orbit error) during object masking in land. Improving the developed ship detection algorithm and collecting reliable AIS data will contribute for building wide integrated surveillance system of marine territory at operational level.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.101-107
• /
• 2013

Generally the commercial high-resolution images have their coordinates, but the locations are locally different according to the pose of sensors at the acquisition time and relief displacement of terrain. Therefore, a process of image co-registration has to be applied to use the multi-temporal images together. However, co-registration is interrupted especially when images include the cloud-covered regions because of the difficulties of extracting matching points and lots of false-matched points. This paper proposes an automatic co-registration method for the cloud-covered high-resolution images. A scale-invariant feature transform (SIFT), which is one of the representative feature-based matching method, is used, and only features of the target (cloud-covered) images within a circular buffer from each feature of reference image are used for the candidate of the matching process. Study sites composed of multi-temporal KOMPSAT-2 images including cloud-covered regions were employed to apply the proposed algorithm. The result showed that the proposed method presented a higher correct-match rate than original SIFT method and acceptable registration accuracies in all sites.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.19-25
• /
• 2013

Recently, the high-resolution satellite images is used the land cover and status data for the natural resources or environment management very helpful. The SVM algorithm of image processing has been used in various field. However, classification accuracy by SVM algorithm can be changed by various kernel functions and parameters. In this paper, the typical kernel function of the SVM algorithm was applied to the KOMPSAT-2 image and than the result of land cover performed the accuracy analysis using the checkpoint. Also, we carried out the analysis for selected the SVM kernel function from the land cover of the target region. As a result, the polynomial kernel function is demonstrated about the highest overall accuracy of classification. And that we know that the polynomial kernel and RBF kernel function is the best kernel function about each classification category accuracy.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.47-55
• /
• 2002

Remote sensing is the science and art of obtaining information about an object, area or phenomenon through the analysis of data acquired by a device that is not in contact with the object, area, or phenomenon under investigation./sup 1)/ EOC (Electro -Optical Camera) sensor loaded on the KOMPSAT-1 (Korea Multi- Purpose Satellite-1) performs the earth remote sensing operation. EOC can get high-resolution images of ground distance 6.6m during photographing; it is possible to get a tilt image by tilting satellite body up to 45 degrees at maximum. Accordingly, the device developed in this study enables to obtain images by photographing one pair of tilt image for the same point from two different planes. KOMPSAT-1 aims to obtain a Korean map with a scale of 1:25,000 with high resolution. The KOMPSAT-1 developed automated feature extraction system based on stereo satellite image. It overcomes the limitations of sensor and difficulties associated with preprocessing quite effectively. In case of using 6, 7 and 9 ground control points, which are evenly spread in image, with 95% of reliability for horizontal and vertical position, 3-dimensional positioning was available with accuracy of 6.0752m and 9.8274m. Therefore, less than l0m of design accuracy in KOMPSAT-1 was achieved. Also the ground position error of ortho-image, with reliability of 95%, is 17.568m. And elevation error showing 36.82m was enhanced. The reason why elevation accuracy was not good compared with the positioning accuracy used stereo image was analyzed as a problem of image matching system. Ortho-image system is advantageous if accurate altitude and production of digital elevation model are desired. The Korean map drawn on a scale of 1: 25,000 by using the new technique of KOMPSAT-1 EOC image adopted in the present study produces accurate result compared to existing mapping techniques involving high costs with less efficiency.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.103-114
• /
• 2013

In this study, we established the ortho mosaic imagery on the Korean Peninsula using KOMPSAT-2 images and conducted an accuracy assessment. Rational Polynomial Coefficient(RPC) modeling results were mostly less than 2 pixels except for mountainous regions which was difficult to select a Ground Control Point(GCP). Digital Elevation Model(DEM) which was made using the digital topographic map on the scale of 1:5,000 was used for generating an ortho image. In the case of inaccessible area, the Shuttle Radar Topography Mission(SRTM) DEM was used. Meanwhile, the ortho mosaic image of the Korean Peninsula was produced by each ortho image aggregation and color adjustment. An accuracy analysis for the mosaic image was conducted about a 1m color fusion image. In order to verify a geolocation accuracy, 813 check points which were acquired by field survey in South Korea were used. We found that the maximum error was not to exceed 5m(Root Mean Square Error : RMSE). On the other hand, in the case of inaccessible area, the extracted check points from a reference image were used for accuracy analysis. Approximately 69% of the image has a positional accuracy of less than 3m(RMSE). We found that the seam-line accuracy among neighboring image was very high through visual inspection. However, there were a discrepancy with 1 to 2 pixels at some mountainous regions.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.270-274
• /
• 2009

한반도의 정밀관측을 목적으로 개발된 KOMPSAT-2위성의 영상을 활용하기 위해서는 촬영 시 발생하는 기하학적 왜곡의 보정이 필요하다. 본 연구에서는 지상기준점(Ground Control Point: GCP) 선택의 세 가지 특성을 각각 적용하여 기하보정을 하였다. 보정 영상의 정확도 검정을 위하여 수치지도(digital map)를 이용한 평균제곱근오차(Root Mean Square Error: RMSE)와 육안검사를 통해 정확도를 비교하였다. 그 결과 영상의 중앙은 선형 교차점을 선택한 방법이 가장 정확하였고, 가장자리는 건물의 모서리 또는 건물의 중심을 선택한 방법이 우수하였다.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_4
• /
• pp.1901-1910
• /
• 2022

Arriving in the new space age, securing technology for fusion application of KOMPSAT-3·3A and global satellite images is becoming more important. In general, multi-sensor satellite images have relative geometric errors due to various external factors at the time of acquisition, degrading the quality of the satellite image outputs. Therefore, we propose a fine-image registration methodology to minimize the relative geometric error between KOMPSAT-3·3A and global satellite images. After selecting the overlapping area between the KOMPSAT-3·3A and foreign satellite images, the spatial resolution between the two images is unified. Subsequently, tie-points are extracted using a hybrid matching method in which feature- and area-based matching methods are combined. Then, fine-image registration is performed through iterative registration based on pyramid images. To evaluate the performance and accuracy of the proposed method, we used KOMPSAT-3·3A, Sentinel-2A, and PlanetScope satellite images acquired over Daejeon city, South Korea. As a result, the average RMSE of the accuracy of the proposed method was derived as 1.2 and 3.59 pixels in Sentinel-2A and PlanetScope images, respectively. Consequently, it is considered that fine-image registration between multi-sensor satellite images can be effectively performed using the proposed method.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.43-47
• /
• 2004

Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and land-based RADAR data, operated by the local Authority of South Korean, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.