• Journal of the Korean Chemical Society
• /
• v.50 no.4
• /
• pp.315-320
• /
• 2006

manganese oxides have been prepared by Chimie Douce redox reaction between permanganate and chalcogen element fine powder under acidic condition (pH = 1). According to powder X-ray diffraction analyses, the S- and Se-doped manganese oxides are crystallized with layered birnessite and tunnel-type -MnO2 structures, respectively. On the contrary, Te-doped compound was found to be X-ray amorphous. According to EDS analyses, these compounds contain chalcogen dopants with the ratio of chalcogen/manganese = 4-7%. We have investigated the chemical bonding character of these materials with X-ray absorption spectroscopic (XAS) analysis. Mn K-edge XAS results clearly demonstrated that the manganese ions are stabilized in octahedral symmetry with the mixed oxidation states of +3/+4. On the other hand, according to Se K- and Te L1-edge XAS results, selenium and tellurium elements have the high oxidation states of +6, which is surely due to the oxidation of neutral chalcogen element by the strong oxidant permanganate ion. Taking into account their crystal structures and Mn oxidation states, the obtained manganese oxides are expected to be applicable as electrode materials for lithium secondary batteries.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.2
• /
• pp.105-109
• /
• 1990

The disinfectivity of formalin fumigation was tested against silkworm nuclear polyhedrosis virus and yellow muscardine pathogen, Beauveria bassiana. The inactivation of the virus was acquired when it was fumigated by adding 30g of potassium permanganate to 75$m\ell$ of formalin per 3.3$m^2$ of rearing room area and viability of the yellow muscardine pathogen was also lost with the same treatment of fumigation. It was also proved that the fumigation didn't give and damage to silkworm larvae when it was applied 2 or 3 times to grown larvae.

• Journal of Environmental Health Sciences
• /
• v.11 no.2
• /
• pp.17-27
• /
• 1985

The objectives of this study is to examine efficiency of swinery wastewater treatment by trickling filters' pilot plant. The results of this study are as follows: 1. The characteristics of sample. The BOD$_5$ was from 2,450 to 2,880mg/l, COD(KMnO$_4$ acid method) was from 910 to 1,064mg/l, and SS was from 920 to 990mg/l. The pH of influent was from 7.3 to 7.6, and the temperature of water was from 17.0$\circ$C to 22.5$\circ$C. 2. For experiment by recirculation, the BODs removal efficiency is 65.2% at recirculation ratio (r)=0, and 70.7% at r=1. The ramoval efficiency of this study is higher than NRC formula of U.S.A.. The recirculation is not significant effect on removal efficiency. 3. For experiment by hydraulic load, the BOD$_5$ removal rate decreased from 73.1% at $3.1m^3/m^2\cdot d$ to 65.3% at $9.2m^3/m^2\cdot d$. The design formula of this study which shows the removal rate of soluble BOD is $Le/Li =10^{-0.24} D/Q^{0.24}$ (Q: hydraulic load, D: depth of filter). 4. For experiment by organic load, the BOD$_5$ removal rate is increased from 70.2% at $0.77kg/m^3\cdot d$ to 75.4% at $4.28kg/m^3\cdot d$. We can obtain the straight line y=0.749 x (y: removed BOD, x :applied BOD) by the least squares method. 5. We can know that trickling filters is strong with the hydraulic load and the organic matter shock load. Here, we can judge that trickling filters is a good method for the treatment of swinery wastewater which containing high concentrated organic matter.

• Journal of Environmental Health Sciences
• /
• v.13 no.1
• /
• pp.47-57
• /
• 1987

Owing to the modification of testing methods of disinfectants or antiseptics, variations of bacteria according to characteristics of regions and resistance changes of bacteria, it is necessary that the bactericidal activities of disinfectants or antiscptics should be reevaluated nowadays. This study was carried out to reevaluate in the vitro bactericidal activity of Chlorhexidine gluconate solution. The results of experiment were summarized as follows. 1. For Chlorhexidine gluconate solution, minimal inhibitory concentrations of total bacteria taken from sewage water and Legionella bozemanii were $2.0\times 10^{-3}$%, $1.0\times 10^{-2}$%, respectively and were comparatively high. Minimal inhibitory concentration of Shigella flexneri was $1.6\times 10^{-4}$%, and was comparatively low. 2. For total bacteria taken from sewage water, it was killed within 15 minute in 0.1% Chlorhexidine gluconate solution when number of cells was $1.6\times 10^7$/ml. 3. For 0.0125% Chlorhexidine gluconate solution, decimal reduction times of Ps. aeruginosa, S. typhi, E. Coli were 45 sec, 25 sec, 18 sec repectively. For 1%, 0.125% Chlorhexidine gluconate solution, decimal reduction times of Legionella bozemanii were 10 sec, 45 sec respectively. 4. There was significant difference in the bactericidal activity of Chlorhexidine gluconate solution according to temperattire. Phenol coefficient of Chlorhexidine gluconate solution as using Staph. aureus was 100 and comparatively higher than that of other disinfectants. In comparison with other disinfectants, Legionella bozemanii was killed within 5 minutes in 0.02% KMnO$_4$ and 0.125% Chlorhexidine giuconate solution but was not killed within 3 minutes in 1% 0-cresol, 1% Phenol.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.281-284
• /
• 1995

The effect of permanganate concentration and refluxing time on the test COD results were investigated, as a validation test of the revised procedure. The amended protocol involves the use of a more dilute(1/2.5) permanganate solution(0.010N) and a shorter(1/3) refluxing period(20 min). This revision resulted only 70% of the COD value determined by the old procedure with 8 somewhat improved precision(CV 4.6%${\rightarrow}$3.3%). The dominant factor that influences the decrease in the COD result is the oxidant concentration, being two thirds of the overall effect. The same results were obtained in the comparison test using seawater samples.

• Journal of the Korean Chemical Society
• /
• v.37 no.5
• /
• pp.477-482
• /
• 1993

The determination of trace level mercury in bio-materials has been investigated by the square wave anodic stripping voltammetry (ASV)-technique at glassy carbon electrode. Prior to analysis, the bio-materials were digested with HNO3/H2SO4 mixture and KMnO4 was added to complete the oxidation. The detection limit of the mercury varied greatly with deposition time, deposition potential, pH and stirring rate. When deposition is carried out for 240 sec with 400 rpm stirring at -1.0 volts vs. Ag/AgCl, the detection limit was below $0.5\;ppb\;(2.5{\times}10^{-9} M)$. The method is recommended for trace level mercury analysis of biomaterials because this procedure is time saving and has higher sensitivity.

• Journal of Environmental Health Sciences
• /
• v.32 no.2 s.89
• /
• pp.171-178
• /
• 2006

The objectives of this study were to investigate the formation of trihalomethanes(THMs) and to compare the concentration level of THMs of swimming pools water by different disinfection methods such as chlorine, ozone-chlorine, and salt brine electrolysis generator (SBEG). The concentration of chloroform was the highest in the chlorine system, and the SBEG was the highest in the production of bromodichloromethane (BDCM), dibromochloromethane (DBCM) and bromoform. The average concentration of total trihalomethanes (TTHMs) in three disinfection systems were $64.5{\pm}27.4mg/l(SBEG),\;43.8{\pm}22.3mg/l(chlorine)$, and $30.6{\pm}16.1mg/l(ozone-chlorine)$, respectively. In chlorine and ozone-chlorine disinfection system, chloroform concentration was highest, followed by BDCN, then DBCM. In the SBEG, TTHMs was composed of 42% of chloroform, 28.9% of bromoform, 15.1% of BDCM and 14% of DBCM, respectively. The strongest correlation was obtained in the levels of chloroform and TTHMs in chlorine, and ozone-chlorine disinfection systems from both indoor and outdoor swimming pools ($r=0.989{\sim}0.999$, p<0.01). In the SBEG, the levels of BDCM and TTHMs showed a good correlation (r=0.913, p<0.01). In chlorine and ozone-chlorine disinfection systems at indoor swimming pools, pH, TOC and $KMnO_4$ consumption showed strong correlation with chloroform and TTHMs concentrations (p<0.01). In the SBEG, pH and TOC were also strongly correlated with chloroform (p<0.01). pH and TTHMs were correlated as well (p<0.05).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.80.2-80.2
• /
• 2012

그라핀(graphene)은 탄소 원자의 2차원 육각형 $sp^2$ 결합체로서 탄소 나노구조체가 가지는 여러 가지 우수한 특성을 보유하면서 대면적 기판 위에서 소자구현 및 투명전극 등으로의 우수한 응용성 때문에 고품질 그라핀 제조와 물리적 특성, 소자응용에 관한 연구가 활발히 진행되고 있다. 최근 그라핀 제조를 위한 여러 가지 방법이 개발되고 있으나 화학적 박리법이 저비용으로 대량생산을 위해 가장 유리한 방법으로 주목을 받고 있다. 화학적 박리법은 벌크 그라파이트를 강한 산을 이용하여 산화시켜 형성된 산화 그라파이트(graphite oxide)을 열적으로 팽창시켜 박리하고 환원하여 그라핀으로 제조하는 것이다. 보통 열적팽창을 위해서 열처리 로를 사용하게 되는데, 본 연구에서는 박리를 보다 효율적으로 진행시키고 고품질의 그라핀을 얻기 위해 마이크로웨이브를 이용한 박리법을 적용하였다. 마이크로웨이브는 설비가 간단하고 매우 균일하게 열팽창을 시킬 수 있을 뿐만 아니라 대량생산에서도 유리할 것으로 기대하였다. 천연 그라파이트(99.9%, 평균입도 $200{\mu}m$)를 Hummer 방법에 따라 $H_2SO_4$와 $KMnO_4$를 사용하여 산화시키고 필터링 후 마이크로웨이브를 조사하였다. 이후 환원 처리를 거쳐 그라핀을 제조하였다. 라만스펙트럼 및 투과전자현미경으로 분석한 결과 우수한 품질의 그라핀이 형성되었음을 알 수 있었다. 그라핀의 두께 및 품질은 마이크로웨이브의 인가시간 및 반복 횟수가 증가함에 따라 크게 영향받는 것을 확인하였다. 본 발표에서는 마이크로웨이브를 사용한 산화 그라파이트 박리 및 그라핀 제조라는 새로운 시도와 주요변수에 따른 그라핀 특성에 관한 결과를 논의할 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1686-1694
• /
• 2019

Objective: Lignin plays a relevant role in the inhibition of cell wall (CW) structural carbohydrate degradation. Thus, obtaining accurate estimates of the lignin content in tropical plants is important in order to properly characterize the mechanism of lignin action on CW degradation. Comparing conflicting results between the different methods available for commercial use will bring insight on the subject. This way, providing data to better understand the relationship between lignin concentration and implications with tropical forage degradation. Methods: Five grass species, Brachiaria brizantha cv $Marand{\acute{u}}$, Brachiaria brizantha cv $Xara{\acute{e}}s$(MG-5), Panicum maximum cv Mombaça, Pennisetum purpureum cv Cameroon, and Pennisetum purpureum cv Napier, were harvested at five maturity stages. Acid detergent lignin (ADL), Klason lignin (KL), acetyl bromide lignin (ABL), and permanganate lignin (PerL) were measured on all species. Lignin concentration was correlated with in vitro degradability. Results: Highly significant effects for maturity, lignin method and their interaction on lignin content were observed. The ADL, KL and ABL methods had similar negative correlations with degradability. The PerL method failed to reliably estimate the degradability of tropical grasses, possibly due to interference of other substances potentially soluble in the $KMnO_4$ solution. Conclusion: ADL and KL methods use strong acid ($H_2SO_4$) and require determination of ash and N content in the lignin residues, therefore, increasing time and cost of analysis. The ABL method has no need for such corrections and is a fast and a convenient method for determination of total lignin content in plants, thus, it may be a good option for routine laboratory analysis.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.3_4
• /
• pp.107-112
• /
• 2007

The effect of microwave heat to retort pouches and microwavable packages was examined. 186 products were collected, but packages were consisted of five package materials such as PET, Aluminum foil, Nylon, EVOH, and polypropylene. The results showed that all packages did not exceed the limits of current packaging regulation on consumption weight of $KMnO_4$, TDI(Toluene diisocyanate), and Caprolactam. Safety control on heat resistant packages considered satisfactory, but investigation on new substances should be continued for preventing any possible migration problems of packaged foods.