• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.1
• /
• pp.19-29
• /
• 2001

Atmospheric concentrations of acidic pollutant were measured by the 4 stage filter pak method at Chunchon and by the 3 stage filter pack method at Seoul and Anmyon-do from January to December 1998. The sample was collected for 24 hours on every Wednesday. Concentrations of particulate matters were highest at Anmyon-do. The particulate concentration was much higher during the warm season than other seasons. While the particulate concentration was higher during the warm season, the concentration of gaseous matter was higher in winter. Dry deposition flux was calculated by using reported deposition velocities and concentration of pollutants measured in this study. The dry deposition velocities used in this study for SO$_2$, SO$_{4}^{2}$, HNO$_3$,NO$_{3}^{-}$ and NH$_3$ were 0.29, 0.15, 2.08( 2.13 only for Anmyon-do), 0.20 and 1.00cm/sec, respectively. At Chunchon, annual sulfur flux originated from dry deposition was 384 kg/$textrm{km}^2$, and the flux from wet deposition was 782kg/$textrm{km}^2$. Dry deposition of sulfur was 33% of total sulfur deposition. The annual nitrogen flux originated from dry deposition was 1,892kg/$textrm{km}^2$. And the flux from wet deposition was 1,066kg/$textrm{km}^2$. Dry deposition of nitrogen was 64% of total nitrogen deposition. Dry deposition as well as wet deposition have to be considerd in the study on acidification of environment such as soil or watershed.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.18-26
• /
• 2013

Shear-wave velocity ($v_s$) structures beneath two seismic stations, JJU and JJB on the flanks of the volcano Halla on Jeju island, Korea, were estimated by receiver-function inversion and H-${\kappa}$ stacking applied to 150 teleseismic events ($M_W{\geq}5.5$) recorded since 2007. $P_S$ waves converted at the Moho discontinuity does not appear clearly for northwesterly back-azimuths ($207{\sim}409^{\circ}$, average $308^{\circ}$) at station JJU and southeasterly back-azimuths ($119{\sim}207^{\circ}C$, average $163^{\circ}$) at station JJB. This may be due to a gradual velocity increase at Moho or heterogeneity within the crust. The $v_s$ models derived by inversion of receiver functions indicate a distinct low velocity layer ($v_s{\leq}3.5km/s$; LVL) within the crust and a gradual increase in $v_s$ in the depth interval of 30 to 40 km. Within the radius of 18 km beneath station JJB, the LVL occurs at depths of 14 ~ 26 km and the 'Moho' ($v_s{\geq}4.3km/s$) is at 34 km depth. Ten kilometers to the west, within the radius of 16 km beneath station JJU, both the LVL and the Moho are significantly shallower, at depths of 14 to 24 km and 30 km, respectively. H-${\kappa}$ analyses for stations JJU and JJB yield estimated crustal thickness of 29 and 33 km and $v_p/v_s$ ratios of 1.64 and 1.75, respectively. The lesser $v_p/v_s$ ratio was derived for rocks nearest to th peak of the volcano.

• Journal of TMJ Balancing Medicine
• /
• v.6 no.1
• /
• pp.1-4
• /
• 2016

We investigated the potential of electromyography (EMG) for diagnosing imbalance in the temporomandibular joint (TMJ) to apply functional cerebrospinal therapy (FCST). The electromyography signals were measured in the sternocleidomastoid muscle (SCM) in patients with temporomandibular disorder (TMD) while a FCST specialist conducted a restricted cervical rotation test. In addition, we also observed the changes in the electromyography signals according to pre-treatment or treatment with a TMJ balancing appliance (TBA), a customized TMJ balancing appliance (CBA), or a CBA with one paper bar. The right SCMs of the two patients with right TMJ imbalance had high EMG signals in the right cervical rotation test, while the left SCMs showed low EMG signals in the left rotation. In addition, the high EMG signals in the right SCMs decreased when using the TBA or the CBA, but the EMG signals of the left SCMs showed low EMG values during the treatments. Furthermore, the EMG signals of the right SCMs rose again after artificial imbalance of the right TMJ by the CBA with one paper bar. This case report demonstrated the potential of EMG as an objective diagnostic method for FCST.

• Journal of Society of Preventive Korean Medicine
• /
• v.20 no.2
• /
• pp.1-15
• /
• 2016

Objectives : This is a study for technological forecasting, aiming to find out the promising future technologies in KM(Korean Medicine) and deduce implications for the research and development of KM. Methods : The first pool of 145 technological tasks related to KM were composed by reviewing the existing data related to technological forecasting. The steering committee for the research set 99 final technological tasks. With the deduced technological tasks, mini-Delphi(2-round) method was conducted and 6 research items were used-the importance, realization time, urgency, technological competitiveness, the main agent that will push forward the task, and obstacles. Results : As a result on the time when the technology will be realized, 58 out of 99 technologies(59%) were predicted to be realized in the same year domestically and globally. The average of the importance of the 99 technological tasks was 72.9. Among them. As for the main agent to push forward the research and development of future technologies, 'industry-academic cooperation' took the highest portion at 58.7%, and regarding the obstacles to realize technological tasks, the lack of infrastructure(research funds) was the highest at 33.6%. Conclusions : This study shows that the development of basic technologies in the technologies of Korean medicine is insufficient and it is believed that the development of basic technologies is urgent to promote the development of application technologies.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.8-15
• /
• 2012

To estimate the S-wave velocity structure beneath the KS31 broad-band station in Wonju, Korea, we used $H-{\kappa}$ stacking and joint inversion of receiver functions and surface-wave dispersion curves derived from 297 teleseismic events (Mw > 5.5) recorded during the period between 2002 and 2009. We thereby determined that the average depth to a nearly flat Moho is $32.4{\pm}0.5\;km$ within tens of kilometer radius of the seismic station. For the crust at this location, we estimate an average shear-wave velocity of 3.69 km/s and a ratio of P- to S-wave velocities, $V_p/V_s$, of $1.72{\pm}0.04$, as is typical for continental crust. A negative phase in the receiver functions at 1 s indicates the presence of a shearwave low velocity layer in a depth interval of 10 to 18 km in the upper crust beneath the KS31 station.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.687-701
• /
• 2014

Sea ice is generally accepted as an important factor to understand the process of earth climate changes and is the basis of earth system models for analysis and prediction of the climate changes. To continuously monitor sea ice changes at kilometer scale, it is demanded to create more accurate grid data from the current, limited sea ice data. In this paper we described a downscaling method for Advanced Microwave Scanning Radiometer 2 (AMSR2) Sea Ice Concentration (SIC) from 10 km to 1 km resolution using a weighting scheme of sea ice days ratio derived from Moderate Resolution Imaging Spectroradiometer (MODIS) sea ice cover product that has a high correlation with the SIC. In a case study for Okhotsk Sea, the sea ice areas of both data (before and after downscaling) were identical, and the monthly means and standard deviations of SIC exhibited almost the same values. Also, Empirical Orthogonal Function (EOF) analyses showed that three kinds of SIC data (ERA-Interim, original AMSR2, and downscaled AMSR2) had very similar principal components for spatial and temporal variations. Our method can apply to downscaling of other continuous variables in the form of ratio such as percentage and can contribute to monitoring small-scale changes of sea ice by providing finer SIC data.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.110.1-110.1
• /
• 2014

The optics of Space telescope is one of the major parts of space mission used for imaging observation of astronomical targets and the Earth. These kinds of space mission have a bulky and complex opto-mechanics with a long optical tube, but there are attempts have been made to observe a target with a small satellite in many ways. In this paper, we describe an optical design of a reflecting telescope for use in a CubeSat mission. For this design, we adopt the off-axis segmented method of astronomical observation techniques based on the Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and a secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can obtain a $0.3{\times}0.2$ degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation. Based on this conceptual design, we will keep trying to study more for astronomical observation with Attitude control system.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.533-537
• /
• 2013

Space telescope optics is one of the major parts of any space mission used to observe astronomical targets or the Earth. This kind of space mission typically involves bulky and complex opto-mechanics with a long optical tube, but attempts have been made to observe a target with a small satellite. In this paper, we describe the optical design of a reflecting telescope for use in a CubeSat mission. For this design we adopt the off-axis segmented method for astronomical observation techniques based on a Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and the secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can yield a 0.383 degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.15-21
• /
• 2012

Objective : Lonicera japonica THUNB. a traditional herbal medicine, has been commonly used anti-inflammatory disease. It has been very complicated with respect to its sources on the market. The significant selection of medicine depends on its origin. However, it is difficult to discrimination criteria for confirming L. japonica authenticity using the senses. This study was performed to determine the discriminant analysis of L. japonica and L. confusa. Methods : The identification of L. japonica and L. confusa were performed by the classification and identification committee of the national center for standardization of herbal medicines. And we examined its differences using HPLC and genetic marker analysis. Results : The analytical pattern of High Performance Liquid Chromatography was determined from the corresponding peak curves ((E)-aldosecologanin, chlorogenic acid, luteolin 7-O-glucoside, sweroside). For L. japonica, additional unknown peaks were detected at 13.8 min, 20.6 min, and 36.9 min. And, we developed genetic marker using the the tRNA-Leu gene, trnL-trnF intergenic spacer and tRNA-Phe region of chloroplast DNA. By the method, 164 bp PCR product amplified from L. confusa was distinguished into L. japonica and L. confusa efficiently. Conclusion : Base on these results, two techniques provide effective approaches to distinguish L. japonica from L. confusa.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.37-42
• /
• 2012

Objectives : Angelica Gigantis Radix is prescribed as the root of different Angelica species on the pharmacopoeia in Korea, Japan and China. Chemical components and their biological activities were also different according to their species. A study for the development of simple method to compare Angelica roots was needed. In order to classify them, the methods such as DNA sequencing analysis and taste sensor were applied to three Angelica species like Angelica gigas, Angelica acutiloba and Angelica sinensis. Methods : PCR amplification of intergenic transcribed spacer (ITS) region was performed using ITS1 and ITS4 primer from nine Angelica roots, and then nucleotide sequence was determined. Taste pattern of samples were measured using the taste-sensing system SA402B equipped with a sensing unit, which consists of artificial lipid membrane sensor probes of anionic bitterness, astringency, saltiness, umami, and cationic bitterness (C00, AE1, CT0, AAE, and AN0, respectively). Results : As a result of comparing the similarity of the ITS region sequences, A. sinensis was discriminated from the others (A. gigas and A. acutiloba). Equally this genetic result, A. gigas and A. acutiloba showed similar taste pattern as compared to A. sinensis. Sourness, bitterness, aftertaste of bitterness, astringency, and aftertaste of astringency of A. sinensis were significantly high as compared with A. gigas and A. acutiloba. In contrast, richness was significantly low. Conclusions : These taste pattern can be used as a way of comparison of Angelica species and this technic could be applied to establish a taste pattern marker for standardization of herbs in various purposes.